Розумні вимірювальні засоби для кіберфізичних систем

: pp. 3-16
1
Lviv Polytechnic National University, Ukraine
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University, Ukraine
4
Lviv Polytechnic National University

Праця спрямована на розвиток кіберфізичних систем, які стають ключовим фактором повсякденного життя, а розумні вимірювальні прилади вважають невід’ємним компонентом цієї системи. Розглядається верифікація метрологічних підсистем за параметрами, що визначають керованість обладнання та процесів, розробленням, впровадженням та реалізацією конкретних метрологічних методів та інструментів, які успішно описуються термінами “апаратна підтримка, основне і проміжне метрологічне програмне забезпечення”.

1. Platzer A. Carnegie Mellon University. Logical Foundations of Cyber-Physical Systems. http://symbolaris. com/logic/lfcps.html.

2. Mathas C. Smart Sensors – Not Only Intelligent, but Adaptable, Contributed By Electronic Products, 2011-09-29.

3. S. Y. Yurish, Sensors: Smart vs. Intelligent, Sensors & Transducers, Vol. 114, Issue 3, pp. 1–6, March 2010.

4. Deb B., Bhatnagar S., Nath B. A Topology Discovery Algorithm for Sensor Networks with Applications to Network Management” // CiteSeerX, 2002.

5. Wayne W. Manges, Oak Ridge National Laboratory.

6. Ad-hoc Sensor Networks http://www.brunel.ac.uk/cedps/electronic-computer-engineering/research-a... wncc/ad-hoc-sensornetworks.

7. Sensor technology handbook, Editor-in-Chief Jon S.Wilson, SA, 2005.

8. Wobschall D. Smart Sensors for Smart Grid // Sensor Tech Forum, 2011.

9. What is smart grid sensor? – Definition from WhatIs.com. internetofthingsagenda. techtarget.com/definitio.

10. Change into UA. Start-up in energetics, 2015.

11. Salem H., Nader M., Middleware: Middleware Challenges and Approaches for Wireless Sensor Networks // IEEE DISTRIBUTED SYSTEMS ONLINE 1541–4922, Published by the IEEE Computer Society, Vol. 7, No. 3, March 2006.

12. What is Middleware? // Middleware.org. Defining Technology, 2008, Retrieved 2013-08-11.

13. Hadim S., Mohamed N., “Middleware challenges and approaches for wireless sensor networks”, IEEE Distributed Systems Online, vol.7, Issue, 2006, Retrieved March 4, 2009 from IEEE Distributed Systems.

14. Kazahaya M. A Mathematical Model and Error Analysis of Coriolis Mass Flowmeters // IEEE Transactions on Instrum. and Measurement/ – 2011. – Vol. 60, Issue 4. – Р. 1163–1174.

15. Spitzer D. The Consumer Guide to Coriolis Mass Flowmeters // Seminar. Spitzer and Boyes, LLC, 2004.

16. The procedure for certification of software of measuring instruments. – Access to information: http://www.uazakon. com/.

17. WELMEC 7.1, Edition 2 Information document. Development of software requirements, Vienna, 48 p., 2005.

18. MI 3286 – 2010. Testing of software protection, with the determination of its level at the measuring instruments tests in order to type approval. – Moscow, 2010. – 33 p. (in Russian).

19. Microsoft Secure Software Development // The 3-rd Conference on minimization of software vulnerabilities in its development, www.microsoft.com/ru-ru/./mssdcon2013/.

20. What is CSSLP (certified secure software lifecycle. Searchsecurity.techtarget.com/./CSSLP-certifie.

21. ISSECO, the International Secure Software Engineering Council. www.isseco.org/

22. Zlygosteva G. V., Muravyev S. V. The generalized model of a test procedure of measuring software // Bulletin of the Tomsk Polytechnic. – Univ, 2011. – Vol. 318, No. 4. – Р. 62–67 (in Russian).

23. Kovalevskaya E. V. Metrology, software quality and certification. – Moscow, 2004 (in Russian).

24. Oleskiv O., Kunets I., Mykytyn I. Review of Techniques and Methods of Software Verification of Metrological Means. – Lviv: Publishing House of Lviv Politechnic, 2014. – No. 75 http://vlp.com. ua/node/12707 (in Ukrainian).

25. Yatsyshyn S., Stadnyk B., Lutsyk Ya., Buniak L. Handbook of Thermometry and Nanothermometry // IFSA Publishing, Spane, 2015.

26. Measurement Science Roadmap for Metal-Based Additive Manufacturing, May 2013, sponsored by NIST.

27. Ko S., Pan H., Grigoropoulos C. et al. All-inkjet-printed flexible electronics fabrication on a polymer substrate by low-temperature high-resolution selective laser sintering of metal nanoparticles // IOP Publishing, Nanotechnology. – 2007, Vol. 18, 345202, 8 pp.,

28. Concept Laser Introduces QA Tool for In Process AM: QMmeltpool 3D Available Next Year, July 2, 2015.