ANALYSIS OF THE MEASUREMENT QUALITY INDEXES

1
Lviv Politecnic National University
2
Lviv Polytechnic National University

The article focuses on the main problems of methodology of the measurement quality evaluation in the context of introduction into metrological practice of the International Dictionary of Metrology VIM 3. The generalized definition of the notion of measurement quality is given. A separate analysis of measurement quality indexes as a process and quality indexes of measurement result as a product of this process is carried out. The analysis and systematization of the functional quality indexes and quality indexes of the efficiency of the measurement process and the measurement result are performed. The recommendations for the development of the measurement quality methodology evaluation as one of the tasks of ensuring the uniformity of measurement are work out.

[1] Verkhovna Rada of Ukraine. The Law of Ukraine №1314-VII “On Metrology and Metrological Activity”, Kyiv: Parliament pub. house, June 05, 2014.

[2] JCGM 200:2012 (JCGM 200:2008 with minor corrections) VIM-3 International Vocabulary of Metrology – Basic and General Concepts and Associated Terms. [On-line]. Available: https://www.bipm.org/en/publications/guides /vim.html.

[3] State Standard Committee of Ukraine. DSTU 2681-94. Metrology: Terms and Definitions. Kyiv: Ukraine, 1994. 

[4] ISO 9000:2015 Quality Management Systems - Fundamentals and Vocabulary. Sept.15, 2015. [On-line]. Available: https://www.iso.org/standard/45481.html

[5] State Standard Committee of Ukraine. DSTU 2925-94.  Product Quality: Estimation of Quality Terms and Definitions, Kyiv, Ukraine, 1995.

[6] ISO 5725-1:1994. Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions, 1994. [On-line]. Available: https://www.iso.org/standard/11833.html.

[7] ISO 10012:2003. Measurement Management Systems - Requirements for Measurement Processes and Measuring Equipment, 2003.  [On-line]. Available: https://www.iso.org/standard/26033.html.

[8] ISO/IEC 17025:2017. General Requirements for the Competence of Testing and Calibration Laboratories, 2017. [On-line]. Available: https://www.iso.org/ru/standard/66912.html.

 [9] ISO/IEC Guide 98-3:2008. (JCGM/WG1/100). Uncertainty of measurement - Part 3: Guide to the expression of uncertainty in measurement (GUM: 1995, 2008. . [On-line]. Available:  https://www.iso.org/standard/50461.html.

[10] Ukrainian Academy of Metrology. Metrology. Terms and Definitions: Modern Interpretation, “Metrology and instruments”, no.6, p.39-45, 2017.

[11] M. Dorozhovets, V. Motalo, B. Stadnyk et al. Fundamentals of Metrology and Measuring Technique, Lviv, Ukraine: Publ. House of Lviv Nat. Polytech. Univ., 2005.

[12] Terminology in Analytical Measurement – Introduction to VIM 3. Ed. by V. J. Barwick, E. Prichard: the first edition of the Eurachem Guide, 2011.

[13] V. Motalo, B. Stadnyk, “Evaluation of Qualimetrical Measurement Quality Based on the Uncertainty Concept”, Pomiary. Automatyka. Kontrola. Warszawa, Poland, vol.59, no.9, p.950-953, 2013.

[14] O. Velychko, O. Dytc, L. Skyba et al, Standardized terminology of technical regulation: Metrology and Metrological Activity. Lviv: Publ. house of JSC “Sc.Techn. Center “Leonorm” (in Ukrainian), 2006.

15] T. Bubela, P. Stolyarchuk, J. Pohodylo et al, Methods and means of determining of the product quality indexes, Lviv, Ukraine: Publ. house of Lviv Polytech. Nat. Univ. (in Ukrainian), 2012.

[16] V. Kuts, P. Stolyarchuk, V. Druzyuk, Qualimetry. Lviv, Ukraine: Publ. house of Lviv Polytech. Nat. Univ. (in Ukrainian), 2012.