Antioxidant traits of some nanocarbon moieties integrated in polymer materials (a Review)

2016;
: pp. 581 – 586
https://doi.org/10.23939/chcht10.04si.581
Received: January 27, 2016
Revised: February 09, 2016
Accepted: June 06, 2016
Authors: 
Eldar Zeynalov, Manfred Wagner, Joerg Friedrich, Matanat Magerramova and Nazilya Salmanova

Eldar Zeynalov-1, Manfred Wagner-2, Joerg Friedrich-2, Matanat Magerramova-1 and Nazilya Salmanova-3

  1. Institute of Catalysis & Inorganic Chemistry, Azerbaijan National Academy of Sciences, 113, H.Javid Ave.,AZ 1143 Baku, Republic of Azerbaijan
  2. Technische Universität Berlin, Straβe des 17. Juni 135, D-10623 Berlin, Germany
  3. Azerbaijan State University of Oil and Industry, Ministry of Education, 20, Azadlig Ave., AZ 1010 Baku, Republic of Azerbaijan

This review briefly gives the status of worldwide researches in the aspect of an impact of incorporated fullerenes and carbon nanotubes (CNTs) on durability of different polymeric composites under stressful harsh therm-oxidative conditions. It has been inferred that among various nanoparticulates, fullerenes and CNTs are preferable to be used for enhancing thermal and mechanical properties of polymers. Fullerenes C60, C70, fullerene soot and CNTs being integrated in polymer matrix effectively prevent both their thermal and thermoxidative degradation, and photooxidation processes as well.

[1] Kumar A., Depan D., Tomer N. and Singh R.: Progr. Polym. Sci., 2009, 34, 479.
[2] Cioslowski J.: Electronic Structure Calculations on Fullerenes and Their Derivatives. Oxford University Press, London 1995.
[3] Krusic P., Wasserman E., Keizer P. et al.: Science, 1991, 254, 1183.
[4] Krusic P., Wasserman E., Parkinson B. et al.: J. Am. Chem. Soc., 1991, 113, 6274.
[5] McEwen C., McKay R. and Larsen B.: J. Am. Chem. Soc., 1992, 114, 4412.
[6] Walbiner M. and Fischer H.: J. Phys. Chem. 1993, 97, 4880.
[7] Zeynalov Е., Allen N. and Salmanova N.: Polym. Degrad. Stabil., 2009, 94, 1183.
[8] Dimitrijevic N., Kamat P. and Fessenden R.: J. Phys. Chem., 1993, 97, 615.
[9] Zeinalov E. and Koβmehl G.: Polym. Degrad. Stabil., 2001, 71, 197.
[10] Zeynalov Е., Magerramova M. and Ishenko N.: Iran. Polym. J., 2004, 13, 143.
[11] Troitskii B., Troitskaya L., Dmitriev A. et al.: Mol. Mat., 2000, 13, 209.
[12] Shibaev L., Egorov V., Zgonnik V. et al.: Polym. Sci. A, 2001, 43, 101.
[13] Cataldo F.: Fullerene Sci. Technol., 2001, 9, 497.
[14] Jipa S., Zaharescu T., Santos C. et al.: Materiale Plastice, 2002, 39, 67.
[15] Troitskii B., Troitskaya L., Dmitriev A. and Yakhnov A.: Eur. Polym. J., 2000, 36, 1073.
[16] Troitskii B., Domrachev G., Khokhlova L. and Anikina L.: Polym. Sci. A, 2001, 43, 964.
[17] Troitskii B., Domrachev G., Semchikov Y. et al.: Rus. J. Gen. Chem., 2002, 72, 1276.
[18] Ginzburg B., Ugolkov V., Shibaev L. and Bulatov V.: Tech. Phys. Lett., 2001, 27, 806.
[19] Ginzburg B., Shibaev L. and Ugolkov V.: Rus. J. Appl. Chem., 2001, 74, 1329.
[20] Ginzburg B., Shibaev L., Ugolkov V. and Bulatov V.: J. Macromol. Sci. B, 2003, 42, 139.
[21] Shibaev L., Ginzburg B., Antonova T. et al.: Polym. Sci. A, 2002, 44, 502.
[22] Troitskii B., Domrachev G., Khokhlova L. et al.: Rus. J. Gen. Chem., 2003, 73, 1091.
[23] Troitskii B., Domrachev G., Khokhlova L. et al.: Rus. J. Gen. Chem., 2003, 73, 1904.
[24] Troitskii B., Khokhlova L., Konev A. et al.: Polym. Sci. A, 2004, 46, 951.
[25] Ginzburg B., Shibaev L., Melenevskaja E. et al.: J. Macromol. Sci. B, 2004, 43, 1193.
[26] Yumagulova R., Medvedeva N., Yakupova L. et al.: Kinet. Catal., 2013, 54, 709.
[27] Zuev V., Bertini F. and Audisio G.: Polym. Degrad. Stabil., 2005, 90, 28.
[28] Watts P., Fearon P., Hsu W. et al.: J. Mat. Chem., 2003, 13, 491.
[29] Sreekanth P., Kumar N. and Kanagaraj S.: Compos. Sci. Technol., 2012, 72, 390.
[30] Shi X., Jiang B., Wang J. and Yang Y.: Carbon, 2012, 50, 1005.
[31] Morlat-Therias S., Fanton E., Gardette J. et al.: Polym. Degrad. Stabil., 2007, 92, 1873.
[32] Bocchini S., Frache A., Camino G. and Claes M.: Eur. Polym. J., 2007, 43, 3222.
[33] Shen Z., Bateman S., Wu D. et al.: Compos. Sci. Technol., 2009, 69, 239.
[34] Gorrasi G., Sarno M., Di Bartolomeo A. et al.: J. Polym. Sci. B, 2007, 45, 597.
[35] Martinez-Morlanes M., Castell P., Alonso P. et al.: Carbon, 2012, 50, 2442.
[36] Guadagno L., Naddeo C., Raimondo M. et al.: Polym. Degrad. Stabil., 2010, 95, 1614.