A fluid loss reducer polymer (polymer-FLR) was synthesized using acrylamide, hydroxyethyl methacrylate, N-vinyl pyrrolidone, and N,N-dimethyl acrylamide by free radical polymerization, followed by partial hydrolysis. Its composition was confirmed using FTIR and 1H NMR spectroscopy. API mud fluid loss reduction of polymerFLR was about 10-fold lower than the blank. High temperature, high pressure fluid loss reduction of about 9-fold were achieved compared with the blank.
[1] Ibeh C.: Master's Thesis. Texas A&M University, College Station, Texas 2007.
[2] Amani M., Al-Jubouri M.: Energ. Sci. Technol., 2012, 4, 27. https://doi.org/10.3968/pdf
[3] Hassiba K., Amani M. Earth Sci. Res., 2013, 2, 175. https://doi.org/10.5539/esr.v2n1p175
https://doi.org/10.5539/esr.v2n1p175
[4] Nasiri A., Valizadeh M., Norouzi H., Hemmati M.: J. Petrol. Sci. Technol., 2012, 2, 37. https://doi.org/10.22078/jpst.2012.75
[5] Apugo-Nwosu T., Mohammed-Dabo I., Ahmed A. et al.: Brit. J. Appl. Sci. Technol., 2011, 1, 152. https://doi.org/10.9734/BJAST/2011/407
https://doi.org/10.9734/BJAST/2011/407
[6] Nyland T., Azar J., Becker T., Lummus J.: SPE Drill. Eng., 1988, 3,195. SPE-14703-PA
[7] Blkoor S., Fattah K.: J. Petrol. Environ. Biotechnol., 2013, 4, 157. https://doi.org/10.4172/2157-7463.1000157
https://doi.org/10.4172/2157-7463.1000157
[8] Shah S., Asafa K.: SPE/ICoTA Coiled Tubing and Well Intervention Conference and Exhibition, March 2014. https://doi.org/10.2118/168289-MS
https://doi.org/10.2118/168289-MS
[9] Lai N., Qin X., Ye Z. et al.: J. Chem., 2013, 1. https://doi.org/10.1155/2013/824785
https://doi.org/10.1155/2013/824785
[10] Karmakar G., Chakraborty C.: Indian J. Chem. Technol., 2006, 13, 162.
[11] Rashidi M.: PhD Thesis. University of Bergen, Norway 2010.
[12] Jousset F., Green D., Willhite G., McCool C.: SPE/DOE Enhanced Oil Recovery Symposium, Tulsa, Oklakhoma 1990, 389. https://doi.org/10.2118/20213-MS
https://doi.org/10.2118/20213-MS
[13] Lucas E., Mansur C., Spinelli L., Queirós Y. : Pure Appl. Chem., 2009, 81, 473. https://doi.org/10.1351/PAC-CON-08-07-21, IUPAC.
https://doi.org/10.1351/PAC-CON-08-07-21
[14] Perricone C., Enright D., Lucas J.: SPE Drill. Eng., 1986, 1, 358.
https://doi.org/10.2118/13455-PA
https://doi.org/10.2118/13455-PA
https://doi.org/10.2118/13455-PA
[15] Nagre R., Zhao L., Frimpong I., Zhao Q-M.: Chem. Pap., 2016, 70, 206. https://doi.org/10.1515/chempap-2015-0184
https://doi.org/10.1515/chempap-2015-0184
[16] Quan H., Li H., Huang Z. et al.: Int. J. Polym. Sci., 2014. https://doi.org/10.1155/2014/201301
https://doi.org/10.1155/2014/201301
[17] Silverstein R., Webster F., Kiemle D.: Spectrometric Identification of Organic Compounds. 7th edn. Wiley, New York 2005.
[18] American Petroleum Institute. Recommended practice standard procedure for laboratory testing drilling fluid. API recommended practice (8th edn). Washington 2008.
[19] Sharma R.: Adv. Appl. Sci. Res., 2012, 3, 3961. www.pelagiaresearchlibrary.com.
[20] Singh P., Sharma V.: J. Sci. Ind. Res., 1997, 56, 281.
[21] Gungor N.: J. Appl. Polym. Sci., 2000, 75, 107. https://doi.org/10.1002/(SICI)1097-4628(20000103)75:1<107::AID-APP12>3.0.CO;2-P
https://doi.org/10.1002/(SICI)1097-4628(20000103)75:1<107::AID-APP12>3.0.CO;2-P
[22] Alaskari M., Teymoori R.: IJE Transactions B, 2007, 20, 283. http://www.ije.ir/Vol20/No3/B/8.pdf