Antifrictional Polymer Composites Based on Aromatic Polyamide and Carbon Black

2018;
: pp. 326-330
1
Ukrainian State University of Chemical Technology
2
Ukrainian State University of Chemical Technology
3
Ukrainian State University of Chemical Technology

Antifrictional polymer composites (PC) based on aromatic polyamide and carbon black were developed. Tribological and physico-mechanical properties of these materials were studied. Influence of concentration and brand of fillers on tribological properties of developed PC was established.

[1] Vizintin J., Kalin M., Dohda K., Jahanmir S.: Tribology of Mechanical Systems: A Guide to Present and Future Technologies. ASME, New York 2004. https://doi.org/10.1115/1.802094
[2] Chichinadze A., Braun Je., Bushe N. et al.: Osnovy Triblogii (Trenie, Iznos, Smazka). Mashinostroenie, Moskva 2001.
[3] van Beek A.: Advanced Engineering Design. Design for Reliability. Delft University of Technology Mechanical Engineering, Delft 2012.
[4] Braun Je., Bujanovskij I., Voronin N. et al.: Sovremennaia Tribologiia (Itogi i Perspektivy). Izdatel'stvo LKI, Moskva 2008.
[5] Myshkin N., Petrokovets M., Kovalev A.: Tribol. Int., 2005, 38, 910. https://doi.org/10.1016/j.triboint.2005.07.016
[6] Brostow W., Kovacevic V., Vrsaljko D. et al.: J. Mat. Edu., 2010, 32, 273.
[7] Ashby M., Jones D.: Engineering Materials. An Introduction to their Properties and Applications. Butterworth-Heinemann, Oxford 2002.
[8] Myshkin N., Pesetskii S., Grigoriev A.: 14th Int. Conf. on Tribology ”SERBIATRIB 2015”, Serbija, Belgrade 2015, 17.
[9] Sytar V.: Voprosy Khimii i Khim. Technol., 2004, 3, 130.
[10] Sytar V., Burya А., Burmistr М. et al: Materials of 4th Int. Conf. “Research and Development in Mechanical Industry” (RaDMI 2004), Serbija, Zlatibor 2004, 21.
[11] Sytar V., Kuzjaev I., Burja A. et al.: Trenie i Iznos, 2004, 25, 219.
[12] Burja A., Erjomina E.: Mezhdun. Nauchno-Techn. Conf. “Polimernye kompozity i tribologija (Polikomtrib-2015)”, Homel, Belarus, Gomel 2015, 562.
[13] Sytar V., Burya A., Burmistr M. et al: World Tribology Congress III, USA, Washington 2005, 55.
[14] Tager A.: Fiziko-Khimiia Polimerov. Nauchnyiy mir, Moskva 2007.
[15] Belyj V., Sviridenok A., Petrokovec M., Savkin V.: Trenie i Iznos Materialov na Osnove Polimerov. Nauka i tehnika, Minsk 1976.
[16] Sytar V., Burmistr M., Kuzjajev I.: Pobudova Elementiv SAPR pry Modeljuvanni ta Proektuvanni Obladnannja Khimichnoi Promyslovosti za Dopomohoiu Paketa MathCAD. UDChTU, Dnipropetrovsk 2004.
[17] Colas G., Saulot А., Descartes S. et al.: Materials of 16th European Space Mechanisms and Tribology Symposium 2015, Spain, Bilbao 2015.
[18] Zhu Y., Wang H.: Wear, 2016, 356-357, 101. https://doi.org/10.1016/j.wear.2016.03.022
[19] Brostow W., Keselman M., Mironi-Harpaz I. et al: Polymer, 2005, 46, 5058. https://doi.org/10.1016/j.polymer.2005.01.088