1. JCCT
  2. All Volumes and Issues
  3. Volume 13, Number 4, 2019
  4. The Ultrasonic Effect on Obtaining and Properties of Osteoplastic Porous Composites

The Ultrasonic Effect on Obtaining and Properties of Osteoplastic Porous Composites

JCCT.
2019;
Volume 13, Number 4
: pp. 429 - 435
https://doi.org/10.23939/chcht13.04.429
Authors:
  1. Volodymyr Skorokhoda
  2. Iryna Dziaman
  3. Galyna Dudok
  4. Taras Skorokhoda
  5. Mykhailo Bratychak Jr
  6. Nataliya Semenyuk
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
Lviv Polytechnic National University
5
Lviv Polytechnic National University
6
Lviv Polytechnic National University

The grafted copolymerization of 2-hydroxyethyl methacrylate to polyvinylpyrrolidone in the presence of mineral fillers (hydroxyapatite, montmorillonite and wollastonite) under ultrasound has been investigated. The effect of ultrasound, nature and amount of mineral filler on the polymerization rate and composition of copolymers has been determined. Ultrasound substantially intensifies the polymerization process and actively affects the formation of the copolymer composition. Under its action, a porous structure of composites is formed, even without adding special foaming agents. The obtained results were used to improve the technology of obtaining osteoplastic porous composites.

2-hydroxyethyl methacrylate
polyvinylpyrrolidone
ultrasound
porous composites
mineral filler
  1. Koval I., Shevchuk L., Starchevskyy V.: Chem. Eng. Transact., 2011, 24, 1315. https://doi.org/10.3303/CET1124220
  2. Skorokhoda V., Melnyk Yu., Semenyuk N., Suberlyak O.: Chem. Chem. Technol., 2015, 9, 55. https://doi.org/10.23939/chcht09.01.055
  3. Chen D., Sharma S., Mudhoo A.: Handbook on Application of Ultrasound. CRC Press, London New York 2011.
  4. Haider S., Haider A.: Hydrogels. IntechOpen, London 2018. https://doi.org/10.5772/intechopen.688817
  5. Suberlyak O., Semenyuk N., Dudok G., Skorokhoda V.: Rus. J. Appl. Chem., 2012, 85, 830. https://doi.org/10.1134/S1070427212050254
  6. Skorokhoda V., Melnyk Y., Shalata V. et al.: East Eur. J. Enterprise Techn., 2017, 1, 50.
  7. Suberlyak O., Melnyk Y., Skorokhoda V.: Mater. Sci., 2015, 50, 889. https://doi.org/10.1007/s11003-015-9798-8
  8. Skorokhoda V., Semenyuk N., Dziaman I. et al.: Voprosy Khim. i Khim. Tekhnol., 2018, 2, 101.
  9. Skorokhoda V., Semenyuk N., Dziaman I., Suberlyak O.: Chem. Chem. Technol., 2016, 11, 171. https://doi.org/10.23939/chcht11.02.171
  10. Lee J., Kim K., Kim T. et al.: J. Porous Mater., 2013, 20, 719. https://doi.org/10.1007/s10934-012-9646-2
  11. Semenyuk N., Kostiv U., Suberlyak O., Skorokhoda V.: Chem. Chem. Technol., 2013, 7, 95. https://doi.org/10.23939/chcht07.01.095
  12. Selyakova V., Kachevarova Y.: Metody Analiza Akrilatov i Metakrilatov. Khimiya, Moskva 1982.
  13. Dubyaga V., Perepechkin L., Katalevskyi E.: Polimernye Membrany. Khimiya, Moskva 1981.
  14. Suberlyak O., Skorokhoda V., Thir I.: Vysokomol. Soed., 1989, 5B, 336.
  15. Suberlyak O., Levitskij V., Skorokhoda V., Godij A.: Ukr. Khim. Zh., 1998, 64, 122.