In this paper, the influence of carbon material type, temperature and oxygen concentration in gas mixture on the processes of carbon monoxide formation in production of the electrodes by graphitization was explored experimentally. Specific quantity of gas formed for a definite time, reduced to mass unit of carbon loading using pitch, packing materials and charge mixture of industrial use, was calculated. It is demonstrated that pitch provides the highest rate of carbon oxidation with the release of CO and substantially exceeds packing materials and charge mixture for this index.
- Kutuzov S., Buriak V., Churilin V. et al.: IV Int. Congress "Non-Ferrous Metals". Russia, Krasnoyarsk 2012, 943.
- Panov Ye., Shylovych I., Ivanenko E. et al.: East.-Eur. J. Enterpr. Technol., 2012, 58, 15.
- Karvatskyi A., Leleka S., Pulinets I. et al.: East.-Eur. J. Enterpr. Technol., 2011, 54, 42.
- Karvatskyi A., Shylovych I., Krutous L. et al.: East.-Eur. J. Enterpr. Technol, 2013, 62, 38.
- Bogacki M., Oleniacz R., Mazur M. et al.: Environ. Protect. Eng., 2012, 38, 15.
- Rattan G., Kumar M.: Chem. Chem. Technol., 2014, 8, 249. https://doi.org/10.23939/chcht08.03.249
- Kostrobii P., Ryzha I.: Chem. Chem. Technol., 2018, 12, 451. https://doi.org/10.23939/chcht12.04.451
- Gomelya N., Ivanenko E.: The IX International Youth Science Environmental Forum "Ecobaltica-2012". Russia, St-Petersburg 2012, 89.
- Fokin V., Malakhov A., Malakhov S. et al.: Tsvetnye Metally, 2002, 4, 48.
- Mazur M., Oleniacz R., Bogacki M. et al.: Emission of polycyclic aromatic hydrocarbons (PAHs) during the production of carbon and graphite electrodes [in:] Pawłowski L., Dudzińska M., Pawłowski A. (Eds.), The 3rd Congress of Environmental Engineering, v.3. CRC Press/Balkema, Taylor & Francis Group, Leiden-London 2010, 59-66. https://doi.org/10.1201/b10566-12