Waste rubber is recognized as a valuable materials resource and searching for new recycling methods is the main activity of many research institutions and companies. During last years only few scientific papers about foamed polymer compositions filled with ground tire rubber were published. The paper reviews the progress in compatibilization and foaming of polymeric compositions filled with a ground tire rubber.
[1] ETRMA, European Tyre and Rubber Industries Statistic Edition 2013.
[2] Sikora J. and Ostaszewska U.: Elastomery, 2010, 14, 17.
[3] Ministry of the Environment, Republic of Poland, Report of the National Waste Management Plan 2012.
[4] Formela K., Cysewska M. and Haponiuk J.: Przem. Chem., 2012, 91, 2175.
[5] Januszewicz K., Melaniuk M. and Klugmann-Radziemska E.: Elastomery, 2010, 14, 10.
[6] Amari T., Themelis N. and Wernik I.: Resour. Pol., 1999, 25, 179.
[7] Mrozinski A. and Filizikowski J.: Inz. Ap. Chem., 2012, 51, 37.
[8] Pang A. and Ismail H.: J. Appl. Polym. Sci., 2014, doi: 10.1002/app.40877
[9] Kakroodi A. and Rodrigue D.: Polym. Comp., 2014, doi: 10.1002/pc.22893
[10] Hrdlicka Z., Kuta A. and Hajek J.: Polimery 2010, 55, 832.
[11] Grigoryeva O., Fainleib A., Tolstov A. et al.: J. Appl. Polym. Sci., 2005, 95, 659.
[12] De D., Panda P., Roy M. et al. : Polym. Eng. Sci., 2013, 53, 227.
[13] Formela K. and Haponiuk J.: Iran Polym. J., 2014, 23, 185.
[14] Shu X. and Huang B.: Constr. Build. Mater., 2013, doi: 10.1016/j.conbuildmat.2013.11.027
[15] Yazdani H., Ghasmi I., Karrabi M. et al.: J. Vinyl Addit. Technol., 2013, 19, 65.
[16] Si H., Chen T. and Zhang Y. : J. Appl. Polym. Sci., 2013, 128, 2307.
[17] Antoniou N. and Zabaniotou A.: Renew. Sust. Energ. Rev., 2013, 20, 539.
[18] Karger-Kocsis J., Meszaros L. and Barany T.: J. Mater. Sci., 2013, 48, 1.
[19] Korger-Kocsis J.: Express Polym. Lett., 2013, 7, 406.
[20] Zhang X., Lu C. and Liang M.: J. Polymer Res., 2009, 16, 411.
[21] Formela K., Cysewska M. and Haponiuk J.: J. Vinyl Addit. Techn., in press.
[22] Kakroodi A. and Rodrigue D.: Polym. Degrad. Stab., 2013, 98, 2184.
[23] Lu X., Wang W. and Yu L.: J. Appl. Polym. Sci., 2014, 131, 39868.
[24] Formela K., Korol J., Cysewska M. and Haponiuk J.: Przem. Chem., 2013, 92, 512.
[25] Naskar A., De S. and Bhowmick A.: J. Appl. Polym. Sci., 2002, 84, 370.
[26] Kumar C., Fuhrmann I. and Karger-Kocsis J.: Polym. Degrad. Stabil., 2002, 76, 137.
[27] Abadchi M., Arani A. and Nazockdast H.: J. Appl. Polym. Sci., 2010, 115, 2416.
[28] Wang L., Lang F., Li S. et al.: J. Thermoplast. Compos., 2013, doi: 10.1177/0892705712473628
[29] Meszaros L., Fejos M. and Barany T.: J. Appl. Polym. Sci. 2012, 125, 512.
[30] Li Y., Zhang Y. and Zhang Y.: Polym. Test., 2004, 23, 83.
[31] Awang M., Ismail H. and Hazizan M.: Polym.Test., 2007, 26, 779.
[32] Lima P., Oliveira J. and Costa V.: J. Appl. Polym. Sci., 2014, 131, 40160.
[33] Formela K., Haponiuk J., Stankiewicz P. et al.: Przem. Chem., 2013, 92, 444.
[34] Formela K. and Haponiuk J.: J. Vinyl Addit. Technol., 2014, doi: 10.1002/vnl.21363
[35] Rios R., Gontijo M., Ferraz V. et al. : J. Braz. Chem. Soc., 2006, 17, 603.
[36] Colom X., Canavate J., Carrillo F. and Sunol J.: J. Appl. Polym. Sci., 2009, 112, 1882.
[37] Lee S., Hwang S., Konptopoulou M. et al. : J. Appl. Polym. Sci., 2009, 112, 3048.
[38] Wu D., Bateman S. and Partlett M.: Compos. Sci. Techn., 2007, 67, 1909.
[39] Tan K., Chunxi L., Meng H. and Wang Z.: Polym. Test., 2009, 28, 2.
[40] Tzoganakis C.: US Patent 7189762, Publ. Mar. 13, 2007.
[41] Wang X., Shi C., Zhang L. and Zhang Y.: J. Appl. Polym. Sci., 2013, 130, 1845.
[42] Lee S., Zhang Z., Xu D. et al.: Polym. Eng. Sci., 2009, 49, 168.
[43] Tolstov A., Grigoryeva O., Fainleib A. et al.: Macromol. Symp., 2007, 254, 226.
[44] Zhang X., Zhu X., Liang M. and Lu C.: J. Appl. Polym. Sci., 2009, 114, 1118.
[45] Zhang X., Zhu X., Liang M. and Lu C.: J. Appl. Polym. Sci., 2012, 126, 1837.
[46] Scuracchio C., Waki D. and de Silva M.: J. Therm. Anal. Calorim., 2007, 87, 893.
[47] Luo M., Liao X., Liao S. and Zhao Y.: J. Appl. Polym. Sci., 2013, 129, 2313.
[48] Isayev A.: US Patent 5258413, Publ. Nov. 2, 1993.
[49] Isayev A., Liang T. and Lewis T.: Rubber Chem. Techn., 2013, doi: 10.5254/RCT.13.87926
[50] Xin Z., Zhang Z., Pal K. et al.: J. Cell. Plast., 2009, 45, 499.
[51] Zhang Z., Zhang S., Lee S. et al.: Mater. Lett., 2008, 62, 4396.
[52] Zhang Z., Sridhar V. and Kim J.: Polym. Comp., 2008, 29, 1276.
[53] Xin Z., Zhang Z., Pal K. et al.: J. Vinyl Addit. Techn., 2009, 15, 275.
[54] Xin Z., Zhang Z., Pal K. et al.: ibid, 266.
[55] Xin Z., Zhang Z., Pal K. et al.: Mater. Des., 2010, 31, 589.
[56] Xin Z., Zhang Z., Zhang B. et al.: J. Comp. Mater., 2009, 43, 3003.
[57] Zhu J., Zhang X., Liang M. and Lu C. : J. Polym. Res., 2011, 18, 533.
[58] Tian D., Zhang X., Zhu J. and Lu C.: J. Vinyl Addit. Techn., 2013, 19, 105.
[59] Cachaco A., Afonso M. and Pinto M.: J. Appl. Polym. Sci., 2013, 129, 2873.
[60] Zhang X., Lu Z., Tian D. et al.: J. Appl. Polym. Sci., 2013, 127, 4006.