The weak point of any structure is always the elements junction node. This article presents the results of a study of the adhesion of glass plates interconnected over the entire surface by means of adhesive materials and triplex technology under the action of static loading. The bearing capacity and deformability of such joints was established. For the research purposes there were designed, manufactured and tested six series of prototypes. The prototypes consisted of three glass plates, each 10 mm thick, interconnected by means of triplex technology and various adhesive materials.
The possibility of using structural building structures from a glass triplex is explored. Are presented the experimental tests of glass multilayer columns with vertical arrangement of layers. The results of experiments are presented. It is worth researching the possibility of using structural building constructions from non-traditional materials. One of these materials is glass. It is established that new architectural tendencies lead to use glass constructions in elements of facades, blocks, bridges, basins became widely used.