Optimal design of unmanned aerial vehicles using parametric CAX systems

1. Łukaszewicz A. (2009): Geometrical modelling of UAV using parametric CAx systems, In: the European Micro Air Vehicle Conference and Competition 2009, TU Delft, the Netherlands, electronic version (www.emav2009.org/EMAV-final-papers/paper_61.pdf); 2. Fishburn P.C. (1970): Utility Theory for Decision Making, J. Wiley and Sons, New York; 3.Vincke Ph. (1992): Multicriteria Decision Aid, J. Wiley and Sons; 4. Doumpos M., Zapounidis C. (2002): Multicriteria Decision Aid Classification Methods, Kluwer Academic Publishers, Dordrecht; 5. Stinton, D. (1985): The Design of the Aeroplane, Collins Professional and Technical Books; 6. Raymer D. (1999): Aircraft Design: A Conceptual Approach, AIAA Education Series, Reston, VA; 7. Brusow W: (1996): Optymalne projektowanie wielozadaniowych statków latających, Biblioteka Naukowa Instytutu Lotnictwa, Warszawa; 8. Keane A.J., Nair P.B. (2004): Computational Approaches for Aerospace Design, First Edition, Wiley; 9. Sobester A., Keane A.J., Scanlan J., Bresslo N.W., (2005): Conceptual Design of UAV Air-frames Using a Generic Geometry Service, AIAA Infotech@Aerospace, Arlington, VA, (Retrieved: March 2, 2010 from: http://www.soton.ac.uk/~as7/publ/infotech05.pdf); 10. Sobester A., Keane A.J. (2006): Supervised Learning Approach to Computer-Aided Design Ge-ometry Repair, AIAA Journal, Vol. 44, No. 2, pp. 282– 289; 11. Sobester A., Keane A.J. (2006): Multidisciplinary Design Optimization of UAV Airframes, 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Confer-ence, AIAA 2006- 1612; 12. La Rocca G., Krakers L., van Tooren M.J.L. (2002): Development of an ICAD Generative Model for Blended Wing Body Aircraft Design, 9th AIAA/ISSMO Symposium on Multidisciplinary Analysis and Optimisation, Atlanta; 13. Osterheld C., Heinze W., Horst P. (2001): Preliminary Design of a Blended Wing Body Configuration using the Design Tool PrADO, CEAS Conference on Multidisciplinary Aircraft Design and Optimisation, Koln; 14. Liu H., Wang G.L., Lu X.L., Wu Z. (2004): Preliminary Investigation of Integrated Multidisciplinary Optimization in Aircraft Conceptual Design, 10th AIAA/ISSMO Multidiscipli-nary Analysis and Optimization Conference, Albany; 15. Antoine N., Kroo I., Willcox K., Barter G. (2004): A Framework for Aircraft Conceptual Design and Environmental Performance Studies, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany; 16. Perez R.E., Liu H.H.T., Behdinan K. (2004): Evaluation of Multidisciplinary Optimization Ap-proaches for Aircraft Conceptual Design, 10th AIAA/ISSMO Multidisciplinary Analysis and Optimization Conference, Albany; 17. Romeo G., Frulla G., Cestino E. (2007): Design of a High-Altitude Long-Endurance Solar-Powered Unmanned Air Vehicle for Multi-Payload and Operations, Proc. IMechE Part G: J. Aerospace Engineering, Vol. 221, 199–216;