The properties of blends filled with polymers of a different structure and low molecular weight additives were analyzed. Additives selection is grounded. It was established that three-component polymer blends have a sufficient fluidity value, which ensures the ability of obtained materials to be processed. The influence of the composition and nature of the components on the physical and mechanical properties of obtained compositions was studied. The adding of mineral filler into the polymers blend helps to increase dispersion and thus expands of application of mentioned polymer owning to their possibility to be processed.
1. Tager, A.A. (1987). Prichiny termodinamicheskoj sovmestimosti polimerov i puti sozdaniya sovmestimyh polimernyh kompozicij. Kompozicionnye polimernye materialy, 33, 3-9.
2. Lipatov, Yu.S. (1986). Fizika - himiya mnogokomponentnyh polimernyh sistem. Kiyiv: Nauk. dumka.
3. Molchanov, Yu.M. (1966). Spravochnik: Fizicheskie i mehanicheskie svoystva polietilena, polipropilena i poliizobutilena. Riga: Zinatne.
4. Kurilo, M.S., Zemke, V.M., Suberlyak, O.V. (2001). Trijni polimerni sumishi - novi mozhlivosti. Kompozicionnye materialy v promyshlennosti, 63-64.
5. Suberlyak, O., Kurilo, M., Zemke, V., Melnyk, W. (2000). The improvement of high molecular weight polyethylene processibility. Materiały polimerowe i ich przetwórstwo, 65-68.
6 . Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics. ІSO 527-2:2012. (2012).
7. Plastics. Determination of hardness. Rockwell hardness. ІSO 2039/2-87. (1993).
8. Pillon, L. Z., Utracki, L. A. (1987). Spectroscopic study of poly (ethylene terephthalate)/ poly (amide 6,6) blends. Polymer Engineering and Science,127(8), 562-567. https://doi.org/10.1002/pen.760270806
https://doi.org/10.1002/pen.760270806
9. Suwanprateeb, J. (2000). Binary and ternary particulated composites: UHMWPE/CaCO3/HDPE. J. Appl. Polym. Sci., 75(12), 1503-1513. https://doi.org/10.1002/(SICI)1097-4628(20000321)75:12<1503:AID-APP9>3.0.CO;2-X
https://doi.org/10.1002/(SICI)1097-4628(20000321)75:12<1503::AID-APP9>3.0.CO;2-X
10. Mikulonok, I.O. (2020). Technologichni osnovi pereroblennya polimernih materialiv. Kiyiv : KPI im. I. Sikorskogo. https://ela.kpi.ua/bitstream/123456789/35084/1/Pereroblennia-polimernykh...
11. Suberlyak, О., Zemke, V., Chopyk, N. (2016). Thermoplastic composition grounded on ultra-high molecular weight polyethylene. Technological and design aspects of extrusion and injection moulding of thermoplastic polymer composites and nanocomposites, 4, 59-81. https://doi.org/10.23939/ctas2018.01.127
https://doi.org/10.23939/ctas2018.01.127
12. Iskandarov, R.Sh., Slеptsov, O.O., Pushkarov, D.V., Osaulenko, S.I. (2022). Vуsokonapovnenі kompoziti v tehnologіyah polіmernogo pakuvannya. Tehnologіуi ta іnzhinіring, 3(8), 26-36. https://doi.org/10.30857/2786-5371.2022.3.3
https://doi.org/10.30857/2786-5371.2022.3.3
13. Bratychak, M.jr., Zemke, V., Chopyk, N. (2021). The features of rheological and tribological behavior of high-viscosity polyolefine compositions depending on their content. Chemistry & Chemical Technology, 4(15), 486 - 492. https://doi.org/10.23939/chcht15.04.486
https://doi.org/10.23939/chcht15.04.486