The work describes a method of modifying the ceramic materials by introducing carbon-based nanoscopic additives into the slip composite and glaze composite in the form of water-based suspension for the production of sanitary and technical ceramics of increased quality. Physical and mechanical properties of experimental samples are researched. The results of experimental research are obtained in the form of experimentally determined properties of composite materials which were nanomodified by carbon nanostructures.
[1] Hvizdoš P., Puchy´ V., Duszova´A., Dusza J.: Carbon Nanofibers Reinforced Ceramic Matrix Composites in Lin T. (Ed.), Nanofibers – Production, Properties and Functional Applications IntechOpen 2011, 241-266. https://doi.org/10.5772/23445
[2] Mukhopadhyay A., Chu B., Green M., Todd R.: Acta Mater., 2010, 58, 2685. https://doi.org/10.1016/j.actamat.2010.01.001
[3] Rodionov R.: Stroit. Mater., Oborudovanie, Technol. XXI veka, 2006, 10, 57.
[4] Yakovlev G., Pervushin G., Lushnikova A. et al.:Proceed. III Int. Conf. “Nanotechnology for Eco-friendly and Durable construction”. Egypt, Cairo 2011.
[5] Yakovlev G., Pervushin G., Maeva I. et al.: Procedia Eng., 2013, 57, 407. https://doi.org/10.1016/j.proeng.2013.04.053
[6] Leontev S., Saraykina K.,Golubev V. et al.: Procedia Eng., 2017, 172, 649. https://doi.org/10.1016/j.proeng.2017.02.076
[7] http://icnnc.org/files/day1/2-yakovlev.pdf
[8] Fedorova G., Mestnikov V., Matveeva O. et al.: Procedia Eng., 2013, 57, 264. https://doi.org/10.1016/j.proeng.2013.04.036
[9] Yakovlev G., Kerene Ya., Maeva I. et al.: Intellektual. Sistemy v Proizvodstve, 2012, 2, 180.
[10] http://www.issp.ac.ru/ebooks/conf/innov_mater.pdf
[11] Grishina A., Korolev E.: Key Eng. Mater., 2016, 683, 90. https://doi.org/10.4028/www.scientific.net/KEM.683.90
[12] Shmalko V., Zelensky O., Rudkevich M.: Chem. Chem. Technol., 2013, 7, 359.
[13] Abramoff M., Magalhaes P., Ram S.: Biophotonics Int., 2004, 11, 36.