Poly(Vinyl Chloride)-Polystyrene Materials with Polymer-Silicate Fillers

2022;
: pp. 212 - 219
1
Lviv Polytechnic National University, The John Paul II Catholic University of Lublin
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
Lviv Polytechnic National University
5
Lviv Polytechnic National University

The features of obtaining and modifying Ba- and Zn-containing polymer-silicate fillers have been researched. The influence of polystyrene modifiers (suspension and impact-resistant polystyrene) and finely dispersed Ba- and Zn-containing polymer-silicate fillers on the gelation process, view of flow curves, rheological properties: flow index, flow limit, thermal stability, surface hardness and elasticity of plasticized poly(vinyl chloride) have been discovered.

[1] Xantos, M. Functional Fillers for Plastics, 2nd ed.; Wiley-VCH: Weinheim, 2010. 
[2] Patrick, S. Practical Guide to Polyvinyl Chloride; Rapra Technology: Shrewsbury, UK, 2005.  
[3] Sheng, K.; Adl, M.; Wang, H.; Qian, X. Polyvinyl Chloride Composites. In Wiley Encyclopedia of Composites, 2nd ed.; Wiley, 2012; Vol. 4, pp 2344-2353.
[4] Levytskyi, V.; Moravskyi, V.; Masyuk, A.; Kuzioła, R.; Grąz, K.; Khromyak, U. Modified Densified Waste of Expanded Polystyrene and Its Blends With Polyamide 6. Polym. Eng. Sci. 2020, 54, 836. https://doi.org/10.1002/pen.25349
[5] Katruk, D.; Levytskyi, V.; Khromyak, U.; Moravskyi, V.; Masyuk, A. Physicochemical Principles of Synthesis and Modification of Unsaturated Polyester-Polyvinyl Chloride Composites and the Properties of Materials Derived from Them. Int. J. Polym. Sci. 2019, 2019, Article 2547384. https://doi.org/10.1155/2019/2547384 
[6] Fink, F.: A Concise Introduction to Additives for Thermoplastic Polymers; Wiley-Scrivener, 2010.
[7] Levytskyi, V.; Masyuk, A.; Katruk, D.; Kuzioła, R.; Bratychak Jr., M.; Chopyk, N.; Khromyak, U. Influence of Polymer-Silicate Nucleator on the Structure and Properties of Polyamide 6. Chem. Chem. Technol. 2020, 14, 496-503. https://doi.org/10.23939/chcht14.04.496
[8] Wypych, G. PVC Degradation and Stabilization, 3rd ed.; ChemTec Publishing: Ontario, Canada, 2015.
[9] Levytskyj, V.; Laruk, Yu.; Humenetsky, T.; Sikora, J. The Influence of Polystyrene Modifier and Plasticizer Nature on the Properties of Poly(vinyl chloride). Chem. Chem. Technol. 2015, 9, 199-203. https://doi.org/10.23939/chcht09.02.199
[10] Levytskyi, V.; Masyuk, A.; Katruk, D.; Bratychak Jr., M. Regularities of Obtaining, Morphology and Properties of Metal-Containing Polymer-Silicate Materials and Polyester Composites on their Basis. Chem. Chem. Technol. 2016, 10, 35-40. https://doi.org/10.23939/chcht10.01.035
[11] Mittal, V. Polymer Nanocomposites: Advances in Filler Surface Modification Technique; Nova Science Publishers: New York, 2009. 
[12] Chukin, G. Khimiya Poverkhnosti i Stroyeniye Dispersnogo Kremnezoma; Tipografiya Paladin: Moskwa, 2008.
[13] Levyts’kyi, V.Ye., Masyuk, А.S., Bialopiotrowicz, Т., Bilyi, L.М., Humenets’kyi, T.V. Morphology and Properties of Thermoplastic Composites with Modified Silicate Fillers. Mater. Sci. 2018, 54 (1), 48-54. https://doi.org/10.1007/s11003-018-0157-4
[14] Agassant, J.; Avenas, P.; Carreau P.; Vergnes, B.; Vincent, M. Polymer Processing Principles and Modelling; Hanser Publications: Ohio, 2017.
[15] Klimov, D.; Petrov, A. Georgiyevskiy, D.: Vyazkoplasticheskiye Techeniya. Dinamicheskiy Khaos, Ustoychivost', Peremeshivaniye; Nauka: Moskwa, 2005. 
[16] Wilkers, C.: PVC Handbook; Carl Hanser Verlag, 2005.