1. JCPEE
  2. All Volumes and Issues
  3. Volume 4, Number 1, 2014
  4. Voltage resonant inverter as a power source

Voltage resonant inverter as a power source

JCPEE.
2014;
Volume 4, Number 1
: pp. 17-22
Authors:
  1. Anatoliy Lupenko
  2. Petro Stakhiv
1
Ternopil Ivan Puliui State National Technical University
2
Lviv Polytechnic National University

The operation mode of a voltage resonant inverter as a power source with variable load is analyzed. In order to reduce load power variations, an approach to development of the inverter’s load power response based on providing similar positive and negative power deviations from its nominal value has been proposed. The design procedure for resonant inverter with open loop structure as a power source has been elaborated. For a high pressure sodium lamp as a load, the power deviation of about 4% from its nominal power in case of two fold increase of the lamp resistance thriughout its lifеtime has been achieved.

Voltage resonant inverter
power source
high frequency operation
variable load resistance.
  1. M.K. Kazimierchuk, and D. Charkovski, “Resonant power converters,” IEEE Wiley Press, vol. 2, pp.632– 2011.
  2. “Power-Mode-Controlled Power-Factor-Corrector for Electronic Ballast,” IEEE Transactions on Industrial  Electronics, vol. 47, no. 4, pp. 796–808, 2000.
  3. C.M. Huang, T.U. Liang, R.L. Lin, and J.F. Chenб “A Novel Constant Power Control Circuit for HID Electronic Ballast,” IEEE Transactions on Power Electronics, vol. 22, no. 3, pp. 854-862, 2007.
  4. S. Singer, R. W. Erikson, “Power-source element and its properties,” IEEE Proc.-Circuits Devices Syst, vol. 141, no. 3, pp. 220-226, 1994.
  5. High pressure sodium lamps. Operational requirements. GOST (State standard) Р 53073-2008 (IEC 60662:2002), Moscow, Russia: Standartinform, p. 53. 2009. (Russian)
  6. C. Branas, F.J. Azcondo, and S. Bracho, “Design of LCpCs Resonant Inverters as a Power Source for HID Lamp Ballast Application,” IEEE Transactions on Industrial  Electronics, vol. 41, pp. 1584–1593, 2005.
  7. A.M.Lupenko and S.A.Lupenko, “Maintenance of high pressure sodium lamp power in permissible area, Lighting engineering and power engineering (Kharkiv national academy), vol. 29, no. 1, pp. 34– 43, 2012.
  8. C. Branas, F.J. Azcondo, and S. Bracho, “Study of Output Variation due to Component Tolerance in LCsCp Resonant Inverters Applied to HPS Lamp Control,” in Proc. 27th Annual Conference of the IEEE Industrial Electronics Society, vol. 1, pp. 1021-1026, Colorado, USA, 2001.