1. UJMEMS
  2. All Volumes and Issues
  3. Vol. 11, No. 1, 2025

Vol. 11, No. 1, 2025

In this Number

(7 papers)
SIMULATION-ANALYTICAL ANALYSIS OF THE INFLUENCE OF TECHNOLOGICAL FACTORS ON THE STRESS-STRAIN BEHAVIOR OF FUNCTIONAL SURFACES OF MOLD PARTS
Vadym Stupnytskyy, She Xianning, Ihor Vrublevskyi
DOI: https://doi.org/10.23939/ujmems2025.01.001
1-17
RESEARCH ON THE MECHANICS OF BIONIC PROSTHETIC FINGERS: OBJECTIVITY IN THE IMPROVEMENT OF MECHANICAL COMPONENTS
Vitalii Zaniuk, Volodymyr Gursky
DOI: https://doi.org/10.23939/ujmems2025.01.018
18-27
MATHEMATICAL MODEL OF THE BOUNDARY LAYER OF AIRFLOW OVER A FLAT SURFACE
Oleksii Lanets, Taras Dmytriv
DOI: https://doi.org/10.23939/ujmems2025.01.028
28-36
DESIGN AND STRENGTH ANALYSIS OF THE PLANETARY GEARBOX SHAFTS FOR AN ELBOW ORTHOSIS USING KISSSOFT
Iaroslav Lavrenko, Daniil Okladnikov
DOI: https://doi.org/10.23939/ujmems2025.01.037
37-43
INFLUENCE OF PROCESS KINEMATICS AND TOOL DESIGN ON GEAR MACHINING BY POWER SKIVING
Ihor Hrytsay, Andrii Slipchuk
DOI: https://doi.org/10.23939/ujmems2025.01.044
44-53
DETERMINING THE IMPACT OF STRUCTURAL FRICTION PARAMETERS IN THE BODY OF AN ASSEMBLED CUTTER ON THE DAMPING OF ITS AMPLITUDE AND SELF-OSCILLATIONS
Yurii Novitskyi, Andrii Slipchuk, Maksym Novitskyi
DOI: https://doi.org/10.23939/ujmems2025.01.054
54-60
DESIGN OF A VIBRATING MACHINE FOR DRY CLEANING OF ROOT VEGETABLES USING NONLINEAR MATHEMATICAL AND THREE-DIMENSIONAL MODELING
Volodymyr Topilnytskyi, Nestor-Taras Velykyi
DOI: https://doi.org/10.23939/ujmems2025.01.061
61-68