Investigation of the process of vibro-impact interaction of vibratoin activator blades with two-phase environment “hydrate lime - water”

2022;
: 36-44
https://doi.org/10.23939/ujmems2022.03.036
Received: July 06, 2022
Revised: July 28, 2022
Accepted: August 30, 2022
1
Department of Technical Mechanics and Dynamics of Machines
2
Lviv Polytechnic National University
3
Department of Chemical Technology of Silicates
4
Department of Chemical Technology of Silicates

The process of mechanical activation of hydrated lime in the vibratory activator of the bunker type is investigated in the work. Economic and environmental effect in the production of reinforced  concrete  structures  is achieved through the use of highly active hydrated lime as a modifying reinforcing additive to concrete based on Portland cement. Theoretical and experimental studies of the influence of vibration displacement parameters of the mixture on the rate and degree of dispersion of hydrated lime and the efficiency of vibroactivation are determined. 

[1] Fine hydrate lime from Kalk Kontor. Access mode: https://www.kalk-kontor.de/ 
[2] Voznyak L. V., Himer P. R., Merdukh M. I., Panevnyk O. V. Hydraulics: Textbook.– Ivano-Frankivsʹk: IFNTUNH, 2012. – 327 s. 
[3] DSTU B B.2.7-90: 2011 Building lime. Specifications. 
[4] DSTU B B.2.7-100-2000 Additives active, mineral for cements. Test methods. 
[5] Zahrai A. I., Borovets Z. I., Lutsuk I. V., Novitsky J. M. Criteria for studying the process of dispersion of hydrated lime-water system // Chemistry, technology of substances and their application. – 2020. – Vip. 3. – № 2. – pp. 23–27, https://doi.org/10.23939/ctas2020.02.023 
[6] Zahrsi A. I., Borovets Z. I., Novitsky Y. M., Chekaylo M. V., Yakymechko Y. B. (2019). Influence of dispersed lime on hardening of cement stone. Chemistry, technology of substances and their application, 2 (2), 55–61, https://doi.org/10.23939/ctas2019.02.055 
[7] Zagray A. I., Borovets Z. I., Lutsuk I. V., Novitsky J. M. Establishment of optimal parameters of vibration activation of hydrated lime // Questions of chemistry and chemical technology. – 2021. – № 6 (139). – P. 25–31, https://doi.org/10.32434/0321-4095-2021-139-6-25-31 
[8] Kolchunov V. I. (2004). Theoretical and applied hydromechanics: Textbook. Manual.-K.: NAU. – 336 p. 
[9] Kuznetsova G. V., Morozova N. N., Khozin V. G. (2015) Carbonate powders in the production of silicate brick on lime-free lime, Sc.Conf.  (7), pp. 10–12. 
[10] Mamytov A. S. (2016) Investigation of the properties of cements with limestone filler, (1), 244–248. 
[11] Fomina E. V., Strokova V. V., Kudeyarova N. P. (2013) Peculiarities of the use of pre-slaked lime in cellular concretes of autoclave hardening, (5), 29–34. 
[12] Kurdowski W. Cement and сoncrete сhemistry. – Poland, Krakow, 2014, https://doi.org/10.1007/978-94-007-7945-7 
[13] Lea F. M., Hewlett P.  C., Martin  Liska.  Lea`s chemistry of cement and concrete. – United  Kingdom, Oxford: Butterworth-Heinemann, 2019. 
[14] Samanta A., Chanda D. K., Das P. S., Ghosh J., Mukhopadhyay A. K., Dey A. Synthesis of nano calcium hydroxide in aqueous medium // J.  Am.  Ceram. Soc. – 2016. – Vol. 99. –  P.  787–795., https://doi.org/10.1111/jace.14023 
[15] Yakymechko Ya., Lutsyuk І., Jaskulski R., Dulnik J., Kropyvnytska T. The Effect of Vibro-Activation Time on the Properties of Highly Active Calcium Hydroxide, Buildings. – 2020. – Vol. 10. –  № 111. –  Р. 1–8, https://doi.org/10.3390/buildings10060111 
[16] Yakymechkon Yа., Jaskulski R., Lutsyuk I. New ways of utilizing lime in modern building technology // Mater. Struct. Technol. – 2019. – № 2. – pp. 61–69, https://doi.org/10.31448/mstj.02.01.2019.61-69