Mathematical modelling of flux-cored layer formation

: 26-34
Received: November 15, 2022
Revised: January 19, 2023
Accepted: February 09, 2023
Donbass State Engineering Academy
Donbass State Engineering Academy
Donbass State Engineering Academy
Donbass State Engineering Academy

Mathematical model for the calculation of the chemical composition of deposited metal with sufficient accuracy has been developed. The presented mathematical model has been developed taking into account shares of base and clad metal, the metal of the previous roll in the subsequent one, and the relative step of cladding. Based on the calculated composition of deposited metal by flux-cored wire it has been proved and experimentally confirmed that the required chemical composition of deposited metal is achieved in the second-third layer regardless of the surfacing step. Theoretically established and experimentally verified the effective relative step of cladding. The established relative pitch allows for minimizing waste when cladding with flux-cored wire. In this case, the cross-sectional area of the roll reinforcement after the finishing run will be minimal.

[1] Buntoeng Srikarun, Hein Zaw Oo, Prapas Muangjunburee Influence of Different Welding Processes on Microstructure, Hardness, and Wear Behavior of Martensitic Hardfaced Cladding [Journal of Materials Engineering and Performance]. 2021 (30), pp. 8984–8995.

[2] B. Venkatesh Mechanical Behavior of Single and Multilayer Hardfacing on Ferrous Alloys [Tribology and Characterization of Surface Coatings].2022.

[3] Dmitry A. Chinakhov, Kirill O. Akimov Formation of the Structure and Properties of Deposited Multilayer Specimens from Austenitic Steel under Various Heat Removal Conditions [Metals]. 12(9), 1527;

[4] João V.S. Matias, Manuel J.C. Lourenço, Jorge C.F. Jorge Behavior of a superaustenitic stainless steel weld cladding deposited by the gas metal arc welding process [Materials Today Communications]. 2022.

[12] M. Najafi, M. Moshkbar Bakhshayesh, A. Farzadi Microstructure and Phase Analysis of Multilayer Ni–Cr–Mo Clad for Corrosion Protection [Transactions of the Indian Institute of Metals]. 2021 (74), pp. 1663–1672.

[6] G.N. Sokolov, I.V. Zorin, A.A. Artem’ev, S.K. Elsukov, Yu. N. Dubtsov, V.I. Lysak Thermal- and wear-resistant alloy arc welding depositions using composite and flux-cored wires with TiN, TiCN, and WC nanoparticles [Journal of Materials Processing Technology]. 2019. pp. 100-110.

[7] Michael P. Shalimov, E.B. Votinova Appication of the Complete Material Balance Method to Estimate the Transition of Elements in Flux Cored Arc Welding [Solid State Phenomena]. 2020. pp.559-564.

[8] Jingli Zhang, Jianjun Wei Effect of interlayer temperature and extremely low terminal cooling temperature on the microstructure and wear resistance of Fe-based hardfacing alloy [Journal of Materials Research and Technology]. 2023.

[9] Vitaliy Ivanov, Elena Lavrova Improving the Efficiency of Strip Cladding by the Control of Electrode Metal Transfer [Applied Mechanics and Materials]. 2014. pp. 266-269.

[10] L. Weingrill, M. B. Nasiri, N. Enzinger Thermo-metallurgically coupled numerical simulation and validation of multi-layer gas metal arc welding of high strength pearlitic rails [Welding in the World]. 2019 (63) pp. 63-73.

[11] Fengjing Xu, Runquan Xiao, Zhen Hou, Yanling Xu, Huajun Zhang, Shanben Chen Multi-layer Multi-pass Welding of Medium Thickness Plate: Technologies, Advances and Future Prospects [Transactions on Intelligent Welding Manufacturing]. 2021.

[12] V. Kassov, O. Razumovich Mathematical simulation of the metal deposited cored wire complex design [Bulletin of Kharkiv National Automobile and Highway University]. 2014 (65-66). pp. 131-134.