hydrophobic effect

The results of the study of water absorption, compressive strength and bending strength, wetting angle of ceramic and cement-sand materials, impregnated with the production of SDP “Kremniypolimer” and developed mixtures of water-soluble liquids are presented in the article. The main hydrophobic materials produced by ZDP “KremnoiPolimer” for obtaining waterproofing liquids are 136-157 M; ETS-32; AKOR-B100. On the basis of GKZH-11N and GKZH-11K experimental waterproofing fluids No. 1 K, No. 2 K, No. 1 H and No. 2 Н were developed.

The article presents the results of the study of the permeability of liquids produced by ZDP “Kremniypolimer” and developed mixtures of water-soluble liquids for their use in restoring vertical and horizontal waterproofing of walls by surface impregnation, by pouring into pre-drilled holes and during waterproofing repair works due to wetting of walls. It is also possible to use these liquids for the surface treatment of walls to protect them at low capillary pressures, water or protection from the effects of rain or snow because of their hydrophobic with followed coating.

This article presents the results of a study liquids production ZSE “Kremniypolimer” and developed mixtures of water-soluble liquids for their application for restoration of vertical walls by surface impregnation and waterproofing during repair work through getting wet walls. It is also possible to use these liquids for the surface treatment of walls to protect them at low capillary pressures, water or protection from the effects of rain or snow because of their hydrophobic with followed coating. As water-soluble silicone fluid used metylsiliconats potassium and sodium.

This article presents the results of a study liquids production ZDP “Kremniypolimer” for their application for obtaining or renewal of vertical waterproofing by surface impregnation and waterproofing during repair work through getting wet walls.
Through gradual cutting surfaces in the technological scheme drawing in several operations (mostly 3–4) “wet” on “wet” first HKZH-11N or HKZH-11K and ETS-32, AKOR-B100 or emulsion 136–157 M can provide sustainable building designs hydrophobic effect in their long-term use.