Slurry Surfasing was investigated using over-stabilised emulsions and highly reactive stone material with a methylene blue index of 18 at high temperatures. Unmodified emulsions were produced on four different emulsifiers at the same dosage -1.2% by mass of the bitumen emulsion itself. Slurry Surfasing was designed on the basis of the investigated emulsions, screening of the 0-4 mm fraction, water, Portland cement and mix time regulator. Setting the mix time for each of the Slurry Surfasing based on six emulsions made it possible to state that there is a relationship between the characteristic of the breaking behavior of the bitumen emulsion mixing stability with cement and mix time. It was established that at a temperature of 30 °C, the use of an over-stabilised emulsion with a special emulsifier at its dosage of 1.2% allows the production of mixtures with highly reactive screenings without including a mix time regulator in the mixture.
Grilli, A., Graziani, A., Carter, A., Sangiorgi, C., Specht, L., Callai, S. (2019). Slurry surfacing: a review of definitions, descriptions and current practices. RILEM Technical Letters. 4. 103-109. 10.21809/rilemtechlett.2019.91.
https://doi.org/10.21809/rilemtechlett.2019.91
Johnson, E., Wood, T., Olson, R. (2007). Flexible Slurry-Microsurfacing System for Overlay Preparation: Construction and Seasonal Monitoring at Minnesota Road Research Project. Transportation research record, 1989(1), 321-326. https://doi.org/10.3141/1989-79
https://doi.org/10.3141/1989-79
Broughton, B., Lee, S. , Kim, Y. (2012). 30 years of microsurfacing: A review. International Scholarly Research Notices, 2012(1), 279643. https://doi.org/10.5402/2012/279643
https://doi.org/10.5402/2012/279643
Shropshire, R., Jahren, C., Wiegand, P. (2011). Development of updated specifications for roadway rehabilitation techniques (No. IHRB Project TR-598). Iowa State University. Institute for Transportation. https://rosap.ntl.bts.gov/view/dot/23706/dot_23706_DS1.pdf
Hajj, E., Loria, L., Sebaaly, P., Borroel, C., Leiva, P. (2011). Optimum Time for Application of Slurry Seal to Asphalt Concrete Pavements. Transportation Research Record, 2235(1), 66-81. https://doi.org/10.3141/2235-08
https://doi.org/10.3141/2235-08
Peshkin, D., Hoerner, T. , Zimmerman, K. (2004). Optimal timing of pavement preventive maintenance treatment applications (Vol. 523). Transportation Research Board. https://books.google.com.ua/books?id=QBLxd-PGn18C&lpg=PP1&ots=ybTrWwpryg...
Hajj, E., Loria, L., Sebaaly, P., Cortez, E., Gibson, S. (2013). Effective timing for two sequential applications of slurry seal on asphalt pavement. Journal of transportation engineering, 139(5), 476-484. https://doi.org/10.1061/(ASCE)TE.1943-5436.000052
https://doi.org/10.1061/(ASCE)TE.1943-5436.0000521
Wang, G., Morian, D., Frith, D. (2013). Cost-benefit analysis of thin surface treatments in pavement treatment strategies and cycle maintenance. Journal of Materials in Civil Engineering, 25(8), 1050-1058. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000563
https://doi.org/10.1061/(ASCE)MT.1943-5533.0000563
Hu, A., Bai, Q., Chen, L., Meng, M., Li, Q., Xu, Z. (2022). A review on empirical methods of pavement performance modeling. Construction and Building Materials. 342. 127968. 10.1016/j.conbuildmat.2022.127968.
https://doi.org/10.1016/j.conbuildmat.2022.127968
Bhargava, N., Siddagangaiah, A., Ryntathiang, T. (2019). State of the art review on design and performance of microsurfacing. Road Materials and Pavement Design. 21. 1-35. 10.1080/14680629.2019.1607771.
https://doi.org/10.1080/14680629.2019.1607771
Jamion, N., Hainin, M., Yaacob, H. (2014). Performance of micro surfacing on expressway. Jurnal Teknologi (Sciences & Engineering), 70(7). https://doi.org/10.11113/jt.v70.3592
https://doi.org/10.11113/jt.v70.3592
Sun, Z., Yu, Q., Wang, T., Yu, B., Zhu, G., Ma, J. (2014). The Effect of Asphalt and Aggregate Gradation on the Low-Temperature Performance of Asphalt Mixtures for Intermediate and Underlying Course. In Applied Mechanics and Materials (Vols. 505-506, pp. 251-254). Trans Tech Publications, Ltd. https://doi.org/10.4028/www.scientific.net/amm.505-506.251
https://doi.org/10.4028/www.scientific.net/AMM.505-506.251
Ye, Y., Guo, J., Hou, F. (2017). Effects of Aggregate Gradation on Drying Micro-Surfacing added by Waste Rubber Powders. In IOP Conference Series: Materials Science and Engineering (Vol. 216, No. 1, p. 012030). IOP Publishing. 10.1088/1757-899X/216/1/012030
https://doi.org/10.1088/1757-899X/216/1/012030
Lerose Lane, P., Cheng, D. (2019). Manual for Slurry Surfacing. https://transweb.sjsu.edu/sites/default/files/1845B-Cheng-Manual-Slurry-...
James, A. (2006). Overview of asphalt emulsion. Transportation Research Circular E-C102: Asphalt Emulsion Technology, 1-15. https://onlinepubs.trb.org/onlinepubs/circulars/ec102.pdf#page=7
Ceratti, J., de Reis, R. (2011). Manual de microrrevestimento asfaltico a frio. Oficina de Textos. https://books.google.com.ua/books?hl=uk&lr=&id=Oh-ZAwAAQBAJ&oi=fnd&pg=PA...(in+Portuguese).&ots=0vMRDgVotu&sig=ZDZyaVETKsR2_BkNvX5PWA0R97E&redir_esc=y#v=onepage&q&f=false
Kucharek, A., Keith Davidson, J., Moore, T., Linton, T. (2010). Performance review of micro surfacing and slurry seal applications in Canada. In CTAA Annual Conference Proceedings-Canadian Technical Asphalt Association Vol. 55, p. 311. https://mcasphalt.com/wp-content/uploads/RESEARCH-PAPERS/2010-Performanc...
Sidun, Iu., Sobol, K., Novytskyi, Y., Rybchynskyi, S. (2023). FEATURES OF THE MIX TIME OF BITUMEN EMULSIONS WITH CEMENT FOR SLURRY SURFACING TECHNOLOGY. Theory and Building Practice. 2023. 12-17. 10.23939/jtbp2023.02.012.
https://doi.org/10.23939/jtbp2023.02.012
Kabiru, U., Mohd Rosli, H., Mohd, I., Warid, M., Naqiuddin, M., Haryati, Y., Norhidayah, H., Muhaimin, A., Othman, C. (2019). Performance evaluation of asphalt micro surfacing - a review. IOP Conference Series: Materials Science and Engineering. 527. 012052. 10.1088/1757-899X/527/1/012052.
https://doi.org/10.1088/1757-899X/527/1/012052
Sidun I., Vollis O., Solodkyy S., Gunka V. (2019). Cohesion of Slurry Surfacing Mix with Slow Setting Bitumen Emulsions. In: Blikharskyy Z., Koszelnik P., Mesaros P. (eds) Proceedings of CEE 2019. CEE 2019. Lecture Notes in Civil Engineering, vol 47. Springer, Cham 10.1007/978-3-030-27011-7_53
https://doi.org/10.1007/978-3-030-27011-7_53
Sidun, I., Sobol, K., Bidos, V., Hunyak, O., Protsyk, I. (2023). Cationic over-stabilised bitumen emulsion in road construction - review. Theory and Building Practice. 2023. 49-55. 10.23939/jtbp2023.01.049.
https://doi.org/10.23939/jtbp2023.01.049
Bidos, V., Sidun, I., Sobol, K., Rybchynskyi, S. (2023) OVER-STABILIZED BITUMEN EMULSIONS MADE FROM EMULSIFIERS FOR SLOW-SETTING EMULSIONS. Theory and Building Practice. 2023. 42-47. 10.23939/jtbp2023.02.042.
https://doi.org/10.23939/jtbp2023.02.042
Sidun, I., Vollis, O., Hidei, V., Bidos, V. (2021). Quick-traffic slurry surfacing mix with orthophosphoric acid. Production Engineering Archives. 27. 191-195. 10.30657/pea.2021.27.25.
https://doi.org/10.30657/pea.2021.27.25
Sidun, I., Vollis, O., Bidos, V., Turba, Y. (2023). Versions of Orthophosphoric Acids for Slurry Surfacing Mix. 10.1007/978-3-031-14141-6_40.
https://doi.org/10.1007/978-3-031-14141-6_40
Bidos, V., Sidun, I., Sobol, K., Balabukh, Y., Rybchynskyi, S. (2024). Breaking behavior of cationic bitumen emulsions. IOP Conference Series: Earth and Environmental Science. 1376. 012010. 10.1088/1755-1315/1376/1/012010.
https://doi.org/10.1088/1755-1315/1376/1/012010