Analysis of the Bacor Refractories after their Service in Glass Furnace

2016;
: pp. 373 – 377
Authors: 
Serhiy Yaitskiy, Liudmyla Bragina and Yuliya Sobol

Serhiy Yaitskiy-1, Liudmyla Bragina-2 and Yuliya Sobol-2

  1. PJSC “Lysychanskii glass factory “Proletary”, 1 Michurina St., 93112 Lysychansk, Ukraine;
  2. National Technical University “Kharkiv Polytechnic Institute”2, 21 Frunze St., 61002 Kharkiv, Ukraine

 

The degree of the baddeleyite-corundum refractories erosion depending on the areas of their location in the glass-making furnace in the float glass production was established. With the use of petrographic analysis the influence of chemical and mineral composition and also temperature and gas environment on corrosion of bacor linings was studied. Due to obtained results the recommendations in relation to the increase of glass-attack resistance of the furnace and its service life length were formulated.

[1] Popov O., Tokarev V. and Ignatyev S.: Steklo i Keramika, 2008, 3, 3.
[2] Rossikhina G., Podholyuzin V., Doroganov V. et al.: Steklo i Keramika, 2006, 11, 24.
[3] Le Bourhis E.: Glass: Mechanics and Technology. WILEY-VCH GmbH & Co., Weinheim 2008.
[4] Schaeffer N.: Tekhnolohiya Stekla. CTI-Print, Kishinev 1998.
[5] Guloyan Yu.: Steklo Mira, 2001, 3, 39.
[6] Yashchishin Yo.: Tekhnologіya Skla, Ch. 2: Osnovy Tekhnologіi Sklyanoi Masy. Beskid Bіt, Lviv 2004.
[7] Guloyan Yu.: Fiziko-Khimicheskie Osnovy Tekhnologii Stekla. Tranzit-IKS, Vladimir 2008.
[8] Pankova N. and Mikhailenko N.: Teoriya i Praktika Promyshlennogo Steklovareniya. RHTU im. D.I. Mendeleeva, Moskva 2003.
[9] Yaitskiy S., Bragina L. and Yaitskiy N.: Vestn. Nats. Techn. Univ. Kharkiv. Polytech. Inst., 2012, 32, 72.