OVER-STABILIZED BITUMEN EMULSIONS MADE FROM EMULSIFIERS FOR SLOW-SETTING EMULSIONS

2023;
: 42-47
https://doi.org/10.23939/jtbp2023.02.042
Received: September 24, 2023
Revised: October 14, 2023
Accepted: November 03, 2023
1
Lviv Polytechnic National University, Department of Highways and Bridges
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University, Department of highways and bridges
4
Lviv Polytechnic National University, Ukraine

Formulations of road over-stabilized cationic bitumen emulsions with orthophosphoric, sulfuric and hydrochloric acids and cationic emulsifiers for slowly disintegrating emulsions have been designed. The physical and mechanical properties of the manufactured over-stabilized bitumen emulsions and their breaking behavior were determined. It has been established that over-stabilised bitumen emulsions demonstrate good storage stability for 180 days. The obtained results of breaking behavior bitumen emulsions indicate that emulsions based on hydrochloric and sulfuric acid have a shorter fines mixing time and greater mixing stability with cement than emulsions based on orthophosphoric acid. For over-stabilized bitumen emulsions on orthophosphoric acid, the method according to DSTU EN 12848:2020 is not effective, due to the high reactivity of emulsions on orthophosphoric acid during interaction with portland cement.

Sidun I., Vollis O., Solodkyy S., Gunka V. (2019). Cohesion of Slurry Surfacing  Mix with Slow Setting Bitumen Emulsions. In: Blikharskyy Z., Koszelnik P., Mesaros P. (eds) Proceedings of CEE 2019. CEE 2019. Lecture Notes in Civil Engineering, vol 47. Springer, Cham 10.1007/978-3-030-27011-7_53
https://doi.org/10.1007/978-3-030-27011-7_53
Sidun, I., Solodkyy, S., & Vollis, O. (2019). Acids in bitumen emulsions. JCEEA, t. XXXV, z. 65 (3/18). 83-90. Doi:10.7862/rb.2018.45
Dołżycki, B., Jaskuła, P. (2019). Review and evaluation of cold recycling with bitumen emulsion and cement for rehabilitation of old pavements. Journal of Traffic and Transportation Engineering, 6, 311-323. https://doi.org/10.1016/j.jtte.2019.02.002
https://doi.org/10.1016/j.jtte.2019.02.002
Pérez, I., & Rodríguez, L., Val, M. (2013). Mechanical properties and behaviour of in situ materials which are stabilised with bitumen emulsion. Road Materials and Pavement Design. 14. 221-238. 10.1080/14680629.2013.779301.
https://doi.org/10.1080/14680629.2013.779301
Liu, Z., Huo, J., & Wang, Z. (2020). Investigation on Properties of Cement Bitumen Emulsion Mortars (CBEM) in Consideration of Emulsifier Types. Advances in Materials Science and Engineering, 2020, 1-10. https://doi.org/10.1155/2020/4820938
https://doi.org/10.1155/2020/4820938
Sidun I., Sobol K., Bidos V., Hunyak O., Protsyk I. (2023). Cationic over-stabilised bitumen emulsion in road construction - review.Theory and Building Practice, 5, 49-55. https://doi.org/10.23939/jtbp2023.01.049
https://doi.org/10.23939/jtbp2023.01.049
Sidun,I.,Vollis,O.,Hidei,V., Bidos,V.(2021). Quick-traffic slurry surfacing mix with orthophosphoric acid. Production Engineering Archives, 27(3), 191-195. https://doi.org/10.30657/pea.2021.27.25
https://doi.org/10.30657/pea.2021.27.25
Sidun, I., Solodkyy, S., Vollis, O., Gunka, V. (2021). Cohesion of Slurry Surfacing  Mix on Bitumens of Different Acid Numbers at Different Curing Temperatures. EcoComfort 2020, LNCE 100, pp.429-435, DOI:10.1007/978-3-030-57340-9_52
https://doi.org/10.1007/978-3-030-57340-9_52
Sidun, I., Vollis, O., Bidos, V., Turba, Y. (2023). Versions of Orthophosphoric Acids for Slurry Surfacing  Mix. In: Blikharskyy, Z. (eds) Proceedings of EcoComfort 2022. EcoComfort 2022. Lecture Notes in Civil Engineering, vol 290. Springer, Cham. https://doi.org/10.1007/978-3-031-14141-6_40.
https://doi.org/10.1007/978-3-031-14141-6_40
Wang, F., Liu, Y., Hu, Sh. (2013). Effect of early cement hydration on the chemical stability of asphalt emulsion. Construction and Building Materials. 42. 146-151. URL: 10.1016/j.conbuildmat.2013.01.009.
https://doi.org/10.1016/j.conbuildmat.2013.01.009
Grilli, A., A Graziani, A., Bocci, M. (2012) Compactability and thermal sensitivity of cement-bitumen-treated materials, Road Materials and Pavement Design, 13:4, 599-617, DOI: 10.1080/14680629.2012.742624
https://doi.org/10.1080/14680629.2012.742624
GrillI, A.,  Bocci, M.,  Graziani, A. (2013) Influence of reclaimed asphalt content on the mechanical behaviour of cement-treated mixtures, Road Materials and Pavement Design, 14:3, 666-678, DOI: 10.1080/14680629.2013.794367
https://doi.org/10.1080/14680629.2013.794367
GrillI, A., Cardone, F., Bocci, M.  (2018) Mechanical behaviour of cement-bitumen treated materials containing different amounts of reclaimed asphalt, European Journal of Environmental and Civil Engineering, 22:7, 836-851, DOI: 10.1080/19648189.2016.1219972
https://doi.org/10.1080/19648189.2016.1219972
Grilli A., Graziani, A., Bocci E., Bocci M. (2016). Volumetric properties and influence of water content on the compactability of cold recycled mixtures. Materials and Structures, 49 (10), 4349-4362, doi:10.1617/s11527-016-0792-x.
https://doi.org/10.1617/s11527-016-0792-x
Pasetto, M., Baldo, N. (2020). Cold Recycling with Bitumen Emulsion of Marginal Aggregates for Road Pavements.. Lect. Notes. Civ. Eng., vol. 48, 155-163. 10.1007/978-3-030-29779-4_15
https://doi.org/10.1007/978-3-030-29779-4_15
Ouyang, J., Hu, L., Li, H., Han, B. (2018). Effect of cement on the demulsifying behavior of over-stabilized asphalt emulsion during mixing. Construction and Building Materials. 177. 252-260. DOI: 10.1016/j.conbuildmat.2018.05.141.
https://doi.org/10.1016/j.conbuildmat.2018.05.141
Romeo, E., Betti, G., Marradi, A., Tebaldi, G. (2018). Effect of active fillers on cracking performance of bitumen-stabilised materials, Road Materials and Pavement Design, 19:7, 1563-1574. DOI: 10.1080/14680629.2017.1325773
https://doi.org/10.1080/14680629.2017.1325773
Godenzoni, C., Graziani, A., Bocci, E., Bocci, M. (2018). The evolution of the mechanical behaviour of cold recycled mixtures stabilised with cement and bitumen: field and laboratory study, Road Materials and Pavement Design, 19:4, 856-877. DOI: 10.1080/14680629.2017.1279073.
https://doi.org/10.1080/14680629.2017.1279073
Lesueur, D., Potti, J. (2004). Cold mix design: A rational approach based on the current understanding of the breaking of bituminous emulsions, Road Materials and Pavement Design, 5:sup1, 65-87. DOI: 10.1080/14680629. 2004.9689988
https://doi.org/10.1080/14680629.2004.9689988
Salomon, D. (2006). Asphalt emulsion technology, in: Transportation Research Board, Characteristics of Bituminous Materials Committee, Transportation Research Circular E-C102, Washington, DC. URL: https://onlinepubs.trb.org/ onlinepubs/circulars/ec102.pdf