Polypropylene Microfibers with a Filler in the Nanostate

Authors: 

Mariya Tsebrenko, Victoriya Rezanova and Irina Tsebrenko

The physico-chemical regularities of polypropylene microfibers obtained via processing polypropylene/copolyamide (PP/CPA) mixture melts filled with nanosilicas have been investigated. It has been shown that the chemical nature of silica functional groups affects the viscosity of PP/CPA melts. In spite of the solid state of additives the filling effect does not occur or reveals weakly. Silicas do not prevent the polypropylene fiber-forming in a copolyamide matrix but improve it. This is explained by the stabilizing action of silica additives on PP liquid streams. Nanofilled polypropylene microfibers with diameters 0.30–0.15 μm have been obtained.

[1] Sreekala M., Lehmann B., Friedrich K. and Rony M.: Int. J. Polym. Mater., 2006, 8, 577.
[2] Lei Li, Bellan L., Craighead H. and Frey M.: Polymer, 2006, 17, 628.
[3] Roko M., Wilyms R. and Alivshatos P.: Nanotechnologii v Bligajshie Desyatiletiya. Prognoz Napravlenij Issledovanij. Mir, Moskwa 2002.
[4] Zheng-Ming H., Kotaki M. and Ramakrishna S.: Innovation, 2005, 5, 5.
[5] Bognitzki M, Frese T., Steinhart M. et al. J.: Polym. Eng. Sci., 2001, 41, 982.
[6] Doshi J. and Reneker D.: J. Electrostatics, 1995, 35, 151.
[7] Malyshewa T.: Obzor Rynka, 2001, 471, 194.
[8] Kulichihin V., Plotnikova E., Terezin A., et al.: Vysokomol. Soed., 2000, A 42, 2532.
[9] Tsebrenko M., Yudin A., Ablazova T. and Vinogradov G.: Polymer, 1976, 17, 831.
[10] Tsebrenko M.: Ultratonkie Sinteticheskie Volokna. Khimia, Moskwa 1991.
[11] Tsebrenko M.: Int. J. Polym. Mater., 1983, 10, 83.
[12] Sercov A., Egorova P.: Teoriya Obrazovania Khimicheskih Volokon. Khimia, Moskwa 1975.
[13] Han C. and Funatsu K.: J. Rheol., 1978, 22, 571.
[14] Rayleigh L.: Philos. Mag., 1982, 34, 145.
[15] Weber C. and Angew Z.:  Math., 1931, 11, 113.
[16] Tomotika S.: Proc. Roy. Soc. (London), 1936, A153, 302.
[17] Yambrih M., Budzak D., Yambrih P. et al.:  Preprints of Int. Conf. Chem. Fibers, 2000, 1, 2.
[18] Utracki L., Bakerdjiane Z. and Kamal M.: J. Appl. Polym. Sci., 1975, 19, 481.
[19] Tsebrenko M., Danilova G. and  Malkin A.: J. Non- Newtonian Fluid Mech., 1989, 31, 1.
[20] Lutsik P., Malkin E. and Abarji I.: Teplo- i Masoperedacha pri Obrabotke Tekstilya. Naukova dumka, Kyiv 1993.
[21] Chappeler D.: Amer. Chem. Soc. Polym. Prepr., 1964, 5 363.
[22] Nikiforova A., Chalih A., Avdeev N. and Zelener Y.: Plastmasy, 1981, 4, 36.