This paper presents a 3D modelling approach for developing Unmanned Aerial Vehicles (UAVs) aimed at increasing UAV availability in Ukraine. Using CAD (Computer-Aided Design) tools, particularly SolidWorks, a prototype based on the F-15 aircraft was created, followed by CNC (Computer Numerical Control) machining and the use of composite materials for a lightweight frame. For this UAV, laser guidance technology was implemented with software controlling navigation adjustments, ensuring high precision in target tracking. Laser guidance is interference-resistant, making it ideal for detecting and intercepting fast and small drones. This efficient and cost-effective design enables the rapid creation of an accurately laser-guided UAV
- Engineering drawing education using CAD tools / A. Lukaszewicz, G. Skorulski, M. Melnyk, А. Kernytskyy, A. Zdobytskyi, K. Kolesnyk// CAD in machinery design. Implementation and educational issues. XXIX International Polish-Ukrainian conference. – Kraków: Wydawnictwa AGH, 2023. – pp.95–102.
- Lukaszewicz, A.; Szafran, K.; Jozwik, J. CAx Techniques Used in UAV Design Process. In Proceedings of the 2020 IEEE 7th International Workshop on Metrology for AeroSpace (MetroAeroSpace), Pisa, Italy, 22–24 June 2020; pp. 95–98.
- Grodzki, W.; Lukaszewicz, A. Design and manufacture of umanned aerial vehicles (UAV) wing structure using composite materials. Mater. Werkst. 2015, 46, 269–278.
- Holovatyy A., Pitsyshyn A., Yazh A., Lukaszewicz A., Giernacki W., Kolesnyk K. Behavioral modelling and simulation of microelectromechanical gyroscopes // CAD in machinery design. Implementation and educational issues : proceedings of the XXXІ International conference CADMD 2023 (Supraśl, Poland, 26-28 October, 2023). – 2023. – p. 19.
- Tsmots I., Teslyuk V., Lukaszewicz A., Lukashchuk Y., Kazymyra I., Holovatyy A., Opotiak Y. An approach to the implementation of a neural network for cryptographic protection of data transmission at UAV // Drones (Basel). – 2023. – Vol. 7, iss. 8.
- Krishna C. N., Łukaszewicz A., Holovatyy A., Sultan M. T. H., Giernacki W. Review of sensors and detection method of anti-collision system of unmanned aerial vehicle // Sensors (Switzerland), 2023, Vol. 23, iss. 15.
- Nevliudov I., Ponomaryova G., Bortnikova V., Maksymova S., Kolesnyk K. MEMS accelerometer in hexapod intellectual control // Perspektyvni tekhnolohii i metody proektuvannia MEMS : materialy XIV Mizhnarodnoi naukovo-tekhnichnoi konferentsii, 18–22 kvitnia, 2018 r., Poliana, Ukraina. – 2018. – pp. 146–150.
- Iwaniec M., Teslyuk V., Mashevska M., Lobur M., Holovatyy A., Kolesnyk K. Development of vibration spectrum analyzer using the Raspberry Pi microcomputer and 3-axis digital MEMS accelerometer ADXL345 // Perspective technologies and methods in MEMS design (MEMSTECH): proceedings of XIIIth International conference, Polyana, April 20–23, 2017. – 2017. – P.25–29.
- K. K. Nguyen, T. Q. Duong, T. Do-Duy, H. Claussen and L. Hanzo, "3D UAV Trajectory and Data Collection Optimisation Via Deep Reinforcement Learning," in IEEE Transactions on Communications, vol. 70, no. 4, pp. 2358-2371, April 2022, doi: 10.1109/TCOMM.2022.3148364
- Y. Sun, D. Xu, D. W. K. Ng, L. Dai and R. Schober, "Optimal 3D-Trajectory Design and Resource Allocation for Solar-Powered UAV Communication Systems," in IEEE Transactions on Communications, vol. 67, no. 6, pp. 4281-4298, June 2019, doi: 10.1109/TCOMM.2019.2900630
- C. Teulière, L. Eck, E. Marchand and N. Guénard, "3D model-based tracking for UAV position control", 2010 IEEE/RSJ International Conference on Intelligent Robots and Systems, Taipei, Taiwan, 2010, pp. 1084-1089, doi: 10.1109/IROS.2010.5649700