The influence of the nature of modified fillers (Ni- and Cu- containing polymer-silicate materials) on the kinetics of emulsion polymerization of methyl methacrylate in the presence of polyvinylpyrrolidone graft copolymers was investigated. The effect of modified metal-containing silicate fillers on the technological properties of the developed materials was determined. In particular, the introduction of fillers contributes to a significant reduction of technological shrinkage and moisture absorption of polymethyl methacrylate materials. An increase in the chemical resistance and maximum operating temperature of the developed materials is also noted.
1. Goseki R., Ishizone T. (2015) Poly(methyl methacrylate) (PMMA). In: Kobayashi, S., Müllen, K. (eds) Encyclopedia of Polymeric Nanomaterials. Berlin: Springer. 1702-1710 р. https://doi.org/10.1007/978-3-642-29648-2_244
https://doi.org/10.1007/978-3-642-29648-2_244
2. Manish Kumar (2023) Poly(methyl methacrylate) (PMMA) Nanocomposites. - London: LAP Lambert Academic Publishing, - 260 p.
3. Umar Ali, Khairil Juhanni Bt. Abd Karim and Nor Aziah Buang (2015) A Review of the Properties and Applications of Poly (Methyl Methacrylate) (PMMA).Polymer Reviews, 55.(4). 678-705. DOI: 10.1080/15583724.2015.1031377
https://doi.org/10.1080/15583724.2015.1031377
4. Fen Ran, Shengqiang Nie, Weifeng Zhao, Jie Li, Baihai Su, Shudong Sun, Changsheng Zhao (2011) Biocompatibility of modified polyethersulfone membranes by blending an amphiphilic triblock co-polymer of poly(vinyl pyrrolidone)-b-poly(methyl methacrylate)-b-poly(vinyl pyrrolidone).Acta Biomaterialia, 7. No 9, 3370-3381. https://doi.org/10.1016/j.actbio.2011.05.026.
https://doi.org/10.1016/j.actbio.2011.05.026
5. W.S. Hussain, J.K. Oleiwi, Q.A. Hamad (2023) Mechanical properties of PMMA-based biocomposites with polyamide and polyvinylpyrrolidone blends for denture applications.Journal of Composite and Advanced Materials. 33 (5), 293-302. https://doi.org/10.18280/rcma.330503
https://doi.org/10.18280/rcma.330503
6. Zinah Alabdali, Mary Reiter, Jennifer Lynch-Branzoi and Adrian Mann (2021) Compositional effects on mechanical properties and viscosity in UDMA-MMA blends.Journal of Adhesion Science and Technology, 35( 6), 610-625. DOI: 10.1080/01694243.2020.1816779
https://doi.org/10.1080/01694243.2020.1816779
7. S.G. Al Nakash (2012) Effect of incorporation of poly vinyl pyrrolidone on transverse strength, impact strength and surface roughness of autopolymerizing acrylic resin. Tikrit Journal for Dental Sciences, 2 137-144.
https://doi.org/10.25130/tjds.2.2.9
8. U.V. Khromyak, V.Ye. Levytskyi, K.V. Stepova, V.Y. Skorokhoda (2018) Synthesis and properties of composites based on copolymers of polyvinylpyrrolidone and methyl methacrylate.Voprosy Khimii i Khimicheskoi Tekhnologii. 4. P. 135-141.
9. Q. Adnan Hamad (2019) Study of flexural and impact properties of nanohybrid composites materials by using poly methyl methacrylate (PMMA) matrix.Journal of Engineering and Sustainable Development, 23 (3). 114-127. https://doi.org/10.31272/jeasd.23.3.9
https://doi.org/10.31272/jeasd.23.3.9
10. А.S. Masiuk, V.E. Levytskyi, D.S. Katruk, T.V. Humenetskyi, L.M. Bilyi (2022) Physicomechanical Properties of Polyvinyl-Chloride-Polystyrene Plastics.Materials Science, 57(4), 595-601. https://doi.org/10.1007/s11003-022-00583-0
https://doi.org/10.1007/s11003-022-00583-0
11. V.E. Levyts'kyi, А.S. Masyuk, Т. Bialopiotrowicz, L.М. Bilyi, T.V. Humenets'kyi (2018) Morphology and Properties of Thermoplastic Composites with Modified Silicate Fillers.Materials Science, 54 (1). 48-54. https://doi.org/10.1007/s11003-018-0157-4
https://doi.org/10.1007/s11003-018-0157-4
12. P. Franco, I. De Marco (2020) The Use of Poly(N-vinyl pyrrolidone) in the Delivery of Drugs: A Review.Polymers (Basel),12 (5), 1114-1143. doi: 10.3390/polym12051114.
https://doi.org/10.3390/polym12051114
13. Teodorescu Mirela, Bercea, Maria (2015) Poly(vinylpyrrolidone) - A Versatile Polymer for Biomedical and Beyond Medical Applications. Polymer-Plastics Technology and Engineering, 54, 923-943. 10.1080/03602559.2014.979506.
https://doi.org/10.1080/03602559.2014.979506
14. U. Khromiak, V. Levytskyi, K. Stepova, A. Tarnawsky (2018) Synthesis and properties of adhesive polymer-methylmethacrylate materials. International Journal of Polymer Science, 2018, 1-9. https://doi.org/10.1155/2018/4905304
https://doi.org/10.1155/2018/4905304
15. V.Ye. Levytskyi, A.S. Masyuk, O.V. Suberlyak (2017) Preparation and properties of polymer-silicate composites based on hydrophilic polymers.Voprosy Khimii i Khimicheskoi Tekhnologii, 6, 68-74.
16. V.E. Levytskyi, A.S. Маsyuk, L.М. Bilyi, T.V. Humenetskyi, A.М. Shybanov (2020) Influence of Silicate Nucleation Agent Modified with Polyvinylpyrrolidone on the Morphology and Properties of Polypropylene.Materials Science, 55 (4), 555-562. https://doi.org/10.1007/s11003-020-00338-9
https://doi.org/10.1007/s11003-020-00338-9
17. S. Devikala, D. Ajith, P. Kamaraj, and M. Arthanareeswari (2019) Structural morphological and electrochemical studies on PMMA/PVP blends. Мaterials Today: Proceedings, 14, 630-639. https://doi.org/10.1016/j.matpr.2019.04.186
https://doi.org/10.1016/j.matpr.2019.04.186