The paper shows the possibility of efficiently using oilseed production and processing waste. The methods of chemical transformation of by-products of oil and fat production into technological systems for sustainable development have been developed. They have been used to create surfactants and lubricant systems for hydrocarbon production and wwllorkover of wells; polyfunctional additives used as components of lubricants and cutting fluids to improve their antioxidant, extreme pressure, antiwear, lubricating, and cooling properties of metalworking processes. Technological systems have been developed that, along with increased functional properties, have improved biodegradability and caused minimal environmental harm.
1. Abo-Hatab, H.F., Kandile, N.G., & Salah, H.M. (2018). Eco-friendly Multifunction Petroleum Additives: Preparation, Characterization and Evaluation. Tribology in Industry, 40(1), 129–138. doi: https://doi.org/10.24874/ti.2018.40.01.12
https://doi.org/10.24874/ti.2018.40.01.12
2. Bera, A., Kumar, T., Ojha, K., & Mandal, A. (2014). Screening of microlubricant properties for application in enhanced oil recovery. Fuel, 121, 198-207. doi: https://doi.org/10.1016/j.fuel.2013.12.051
https://doi.org/10.1016/j.fuel.2013.12.051
3. Bodachivskyi, I.S., & Pop, G.S. (2016). Designing and characterization of aqueous microlubricants for metalworking operations. Kataliz ta naftokhimiia, 25, 25–32.
4. Bodachivska, L.Yu. (2021). Side streams from the vegetable oil production as feedstock for surfactants and their derivative technical systems. Kataliz ta naftokhimiia, 31, 55–61. doi: https://doi.org/10.15407/ kataliz2021.31.055
https://doi.org/10.15407/kataliz2021.31.055
5. Boral, S., & Bohidar, H. B. (2012). Effect of Water Structure on Gelation of Agar in Glycerol Solutions and Phase Diagram of Agar Organogels. Journal of Physical Chemistry, 116(24), 7113–7121. doi: https://doi.org/10.1021/jp3022024
https://doi.org/10.1021/jp3022024
6. Florea, O. M., Luca, A. C. & Florescu, D. (2003). The Influence of Lubricating Fluid Type on the Properties of Biodegradable Lubricants. Journal of Synthetic Lubrication, 19(4), 303–313. doi: http://dx.doi.org/10.1002/jsl.3000190404
7. Korff, J. & Cristano, A. (2000). NLGI Spokesman, 64(8), 22–29.
8. Lazaro, L.M., & Aranda, D.A.G. (2014). Process Temperature Profile and Rheological Properties of Lubricants from Vegetable Oils. Green and Sustainable Chemistry, 4(1), 38–43. doi: https://doi.org/10.4236/gsc.2014.41007
https://doi.org/10.4236/gsc.2014.41007
9. Li, W., Wu, Y., Wang, X., & Liu, W. (2012). Tribological Study of Boron-Containing Soybean Lecithin as Environmentally Friendly Lubricant Additive in Synthetic Base Fluids. Tribology Letters, 47(3), 381–388. doi: https://doi.org/10.1007/s11249-012-9994-8
https://doi.org/10.1007/s11249-012-9994-8
10. Negin, C., Ali, S., & Xie, Q. (2017). Most common surfactants employed in chemical enhanced oil recovery. Petroleum, 3(2), 197–211. doi: https://doi.org/10.1016/j.petlm.2016.11.007
https://doi.org/10.1016/j.petlm.2016.11.007
11. Papeikin, O.O., Safronov, O.I., Bodachivska, L. Yu., & Venger, I.O. (2020). Synthesis and properties of urea lubricants based on aminoamides of plant oil phosphatides. Eastern–European Journal of Enterprise Technologies, 4/6(106), 54–60. doi: https://doi.org/10.15587/1729–4061.2020.210043
https://doi.org/10.15587/1729-4061.2020.210043
12. Papeikin, O.O., Bodachivska, L.Yu., Venher, I.O., Davitadze, D.Z., & Spas'ka, O.A. (2021). Mastylni materialy na osnovi vidkhodiv oleoproduktiv. Kataliz ta naftokhimiia, 31, 48–54. doi: https://doi.org/10.15407/kataliz2021.31.048
https://doi.org/10.15407/kataliz2021.31.048
13. Pop, G.S., Bodachivska, L.Yu., & Zheleznyi, L.V. (2012). Transformatsiia tryhlitserydiv i fosfatydiv olii aminamy: syntez, vlastyvosti, zastosuvannia. Kataliz ta naftokhimiia, 21, 104–109.
14. Saikia, T., & Mahto, V. (2018). Evaluation of Soy Lecithin as Eco-Friendly Biosurfactant Clathrate Hydrate Antiagglomerant Additive. Journal of Surfactants and Detergents, 21(1), 101–111. doi: https://doi.org/10.1002/jsde.12018
https://doi.org/10.1002/jsde.12018
15. Shah, P.R., Gaitonde, U.N., & Ganesh, A. (2018). Influence of soy-lecithin as bio-additive with straight vegetable oil on CI engine characteristics. Renewable Energy, 115, 685–696. doi: http://dx.doi.org/10.1016/j.renene.2017.09.013
https://doi.org/10.1016/j.renene.2017.09.013