: pp. 17-20
Lviv Polytechnic National University
Lviv Polytechnic National University, Ukraine
University of Bielsko-Biala, Poland

To study the metrological characteristics, there were studied manufactured based on the Ti-Cu-Co-Si alloy, obtained by quenching from the melt, the sensitive element of the resistance thermotransducer. The instability of its metrological characteristics as a function of temperature up to 350 oC and operation time up to 3000 hours was investigated; it does not exceed 0.025% under the worst operating conditions. In addition, the methodological error of measurement caused by heating of the sensitive element by the measuring current was examined. It was shown that the recorded changes in electrical resistance were outside the value of the methodological error. They may be due to the presence of nanostructured fields of mechanical stresses and the formation of nanoprecipitates as a consequence of manufacturing.

[1] Y. Geng, Y. Ban, Xu Li, S. Tang, Excellent mechanical properties and high electrical conductivity of CuCo-Si-Ti alloy due to multiple strengthening, Materials Science and Engineering, Vol.A821, Is.5 : 141639, June 2021, https://www.researchgate.net/publication/352717779_Excellent _mechanical_properties_and_high_electrical _conductivity_ of_Cu-Co-Si-Ti_alloy_due_to_multiple_strengthening. DOI: 10.1016/j.msea.2021.141639.
[2] Chenhui Lei, Huiya Yang, Feng Zhao, Xiaoyang Fang, Youtong Fang and Liang Meng, Effect of Co addition on hardness and electrical conductivity of Cu-Si alloys. Journal of Materials Science, Vol. 56, Issue 26, Sept. 2021, Springer. http://www.springer.com/materials/journal/10853.
[3] Y.F.Ye, Q.Wang, J.Lu, C.T.Liu, Y.Yang, High-entropy alloy: challenges and prospects, Materialstoday, Volume 19, Issue 6, July-August 2016, Pages 349-362, https://doi.org/10.1016/j.mattod.2015.11.026 https://www.sciencedirect.com/science/ article/pii/S1369702115004010?via%3Dihub
[4] Sh. McCombes, Research Design. A Step-by-Step Guide with Examples. Publ. June 7, 2021. https://www.scribbr.com/methodology/research-design/
[5] S. Elo, M. Kääriäinen, O. Kanste, T. Pölkki, K. Utriainen, H. Kyngäs, Qualitative Content Analysis: A Focus on Trustworthiness, Sage Journals, Research Article. Publ. Febr. 11, 2014, https://doi.org/10.1177/2158244014522633
[6] N.Raghavendra, L.Krishnamurthy, Engineering Metrology and Measurements, Oxford university press, 2014. https://www.google.com/url?sa
[7] L. Pendrill, Man as a Measurement Instrument, NCSLI Measure J. Meas. Sci., Vol. 9 No. 4, Dec. 2014, pp.24-35, https://www.divaportal.org/smash/get/diva2:964486/FULLTEXT01.pdf
[8] Introduction to Measurements & Error Analysis, University of North Carolina, Department of Physics and Astronomy, pp.1-18, 2012, https://physics.unc.edu/wpcontent/uploads/sites/218/2012/10/uncertainty.pdf
[9] European Metrology Research Program for Innovation and Research, EURAMET, 2022, https://msu.euramet.org/
[10] A. Goel, Metrology & Quality Control : Science of Measurement, 2020, https://www.amazon.com/MetrologyQuality-Control-Science-Measurement/dp/B...
[11] International Annealed Copper Standard (IACS). https://archive.org/stream/copperwiretables31unituoft#page/n0/ mode/1up
[12] Eddy Current Conductivity Meter for Metals, Model 12Z. 2018, Zappitec. http://www.zappitec.com/en/products.
[13] Ju Li, Z. Shan, E. Ma, Elastic strain engineering for unprecedented materials properties, MRS Bull., Vol. 39, Issue 2, 2014, pp. 108-114.
[14] H. Hofmann, Advanced nanomaterials, Course support, Powder Technology Laboratory, IMX, EPFL, Version 1, Sept 2009.
[15] S. Yatsyshyn, B. Stadnyk. Accuracy and metrological reliability enhancing of thermoelectric transducers, Sensors and Transducers, Vol. 123, Issue 12, 2010, pp. 69-75. https://www.proquest.com/openview/ 86ba8e8135e87f4a6ab54cff313e866c/1?pq-