Perspectives of polyvinylchloride (PVC) production without labile groups in a backbone have been considered. It has been shown that such production provides drastic increase of an intrinsic stability of polymeric products, possibility of PVC processing with the minimum amounts or in total absence of stabilizers and other chemicals-additives and the opportunity of creation materials and products on a PVC basis with the essentially increased life time. Data allowing to create rigid, semi-rigid and flexible (plasticized) materials and products with the minimum amounts of chemicals-additives and prolonged life time of their service at exploitation under natural and special conditions are presented.
[1] Pudov V.: Plast. Massy, 1976, 2, 18.
[2] Braun D. and Quarg W.: Angew. Makromol. Chem., 1973, 29/30, 163.
[3] Abbas K. and Sorvik E.: J. Appl. Polym. Sci., 1976, 20, 2395.
[4] Valko L., Tvarovska I. and Kovaric P.: Eur. Polym. J., 1975, 11, 411.
[5] Toitsky B. and Troitskaya L.: Vysokomol. Soedin., 1978, 20A, 1443.
[6] Arlman E.: J. Polym. Sci., 1954, 12, 547.
[7] Geddes W.: Eur. Polym. J., 1967, 3, 267.
[8] Bataille P. and Van B.: J. Polym. Sci., 1972, A-1(10), 1097.
[9] Abbas K., Erling M. and Sorvik E.: J. Appl. Polym. Sci., 1973, 17, 3577.
[10] Onoluzka M. and Asahina M.: J. Macromol. Sci., 1969, 3, 235.
[11] Carrega M., Bonnebat C. and Zednic G.: Anal. Chem., 1970, 42, 1807.
[12] Schmidt L.: Angew. Macromol. Chem., 1975, 47, 79.
[13] Lisitsky V., Kolesov S., Gataullin R. and Minsker K.: Zh. Analit. Khimii, 1978, 33, 2202.
[14] Minsker K., Lisitsky V. and Zaikov G.: J. Vinyl Technol., 1980, 2, 77.
[15] Minsker K., Berlin Al. and Lisitsky V.: Vysokomol. Soedin., 1976, 18B, 54.
[16] Minsker K. and Fedoseeva G.: Destrukciya i stabilizaciya polyvinylchloride. Nauka, Moskva 1979.
[17] Minsker K., Kolesov S. and Zaikov G.: Disintegration and Stabilization of Vinyl chloride based polymers. Pergamon Press 1988.
[18] Talamini G. and Pezzin G.: Macromol. Chem., 1960, 42, 26.
[19] Chytry V., Obereigner B. and Lim D.: Eur. Polym. J., 1969, 5, 379.
[20] Mayer Z.: Macromol. Sci., 1974, 10, 263.
[21] Mayer Z., Obereigner B. and Lim, D.: J. Polym. Sci., 1971, 33, 289.
[22] Minsker K., Berlin Al., Lisitsky V., Kolesov S. and Korneva R.: Dokl. Akad. Nauk SSSR, 1977, 232, 93.
[23] Minsker K., Lisitsky V. and Zaikov G.: Vysokomol. Soedin., 1981, 23A, 498.
[24] Minsker K., Kolesov S., Yanborisov V., Berlin Al. and Zaikov G. Vysokomol. Soedin., 1984, 26A, 883.
[25] Shemyakin M. and Shchukina A.: Usp. Khim., 1997, 26, 528.
[26] Minsker K., Berlin Al., Lisitsky V. and Kolesov S.: Vysokomol. Soedin., 1977, 19A, 32.
[27] Yanborisov V., Kolesov S., Berlin Al. and Minsker K.: Dokl. Akad. Nauk SSSR, 1986, 291, 1425.
[28] Minsker K., Berlin Al. and Lisitsky V.: Vysokomol. Soedin., 1976, 18B, 54.
[29] Minsker K., Mukmeneva N., Berlin Al., Kazachenko D. et al.: Dokl. Akad. Nauk SSSR, 1976, 226, 1088.
[30] Mukmeneva N., Agadzhanyan S., Kirpichnikov P. and Minsker K.: Dokl. Akad. Nauk SSSR, 1977, 233, 375.
[31] Minsker K., Mukmeneva N., Kolesov S., Agadzhanyan S., Petrov V. and Kirpichnikov P.: Dokl. Akad. Nauk SSSR, 1979, 244, 1134.
[32] Mukmeneva N., Minsker K., Kolesov S. and Kirpichnikov P.: Dokl. Akad. Nauk SSSR, 1984, 274, 1393.
[33] Mukmeneva N., Cherezova E., Yamalieva L., Kolesov S., Minsker K. and Kirpichnikov P.: Izv. Akad. Nauk SSSR, Ser. Khim., 1985, 5, 1106.
[34] Minsker K., Kolesov S. and Petrov V.: Dokl. Akad. Nauk SSSR, 1980, 252, 627.
[35] Minsker K., Kolesov S., Petrov V. and Berlin Al.: Vysokomol. Soedin., 1982, 24A, 793.
[36] Ivanova S., Zaripova A. and Minsker K.: Vysokomol. Soedin., 1978, 20, 936.
[37] Minsker K., Kolesov S. and Petrov V.: Dokl. Akad. Nauk SSSR, 1982, 268, 632.
[38] Kolesov S., Petrov V., Yanborisov V. and Minsker K.: Vysokomol. Soedin., 1984, 26A, 303.
[39] Minsker K., Kolesov S. and Ivanova S.: Vysokomol. Soedin., 1982, 24A, 2329.
[40] Kolesov S. and Minsker K.: Vysokomol. Soedin., 1983, 25A, 1587.
[41] Minsker K.: J. Polym. Plast. Technol. and Eng., 1997, 36, 513.
[42] Minsker K., Kolesov S. and Zaikov G.: J. Vinyl Technol., 1980, 2, 141.
[43] Minsker K., Kolesov S. and Zaikov G.: Vysokomol. Soedin., 1987, 23A, 498.
[44] Minsker K., Kolesov S., Yanborisov V., Adler M. and Zaikov G.: Dokl. Akad. Nauk SSSR, 1983, 268, 1415.
[45] Kolesov S., Minsker K., Yanborisov V., Zaikov G., Du-Jong K. and Akhmetkhanov R.: Plast. Massy, 1983, 12, 39.
[46] Kolesov S., Steklova A., Zaikov G. and Minsker K.: Vysokomol. Soedin., 1986, 28A, 1885.
[47] Minsker K., Fedoseeva G., Strelkova L., Petrov V. and Kolesov S.: Vysokomol. Soedin., 1983, 25B, 165.
[48] Minsker K., Abdullin M., Manushin V., Malyshev L. and Arzhakov S.: Dokl. Akad. Nauk SSSR, 1978, 242, 366.
[49] Minsker K.: [in:] Pethrick A. (ed.), Polymer Yearbook. Acad. Publ., Harwood 1994.
[50] Minsker K., Kulish E. and Zaikov G.: Vysokomol. Soedin., 1993, 35B, 316.
[51] Palm V.: Osnovy kolichestvennoi teorii organicheskikh reaktsii. Khimiya, Leningrad 1977.
[52] Kolesov S., Kulish E. and Minsker K.: Vysokomol. Soedin., 1994, 36B, 1383.
[53] Kolesov S., Kulish E., Zaikov G. and Minsker K.: Russian Polym. News, 1997, 2, 6.
[54] Kulish E., Kolesov S. and Minsker K.: Bashkirskii Khimicheskii Zhurnal, 1998, 56, 35.
[55] Kulish E., Kolesov S., Minsker K. and Zaikov G.: Vysokomol. Soedin., 1998, 40A, 1309.
[56] Kolesov S., Kulish E., Zaikov G. and Minsker K.: J. Appl. Polym. Sci., 1999, 73, 85.
[57] Kulish E., Kolesov S., Minsker K. and Zaikov G.: Chem. Phys. Report, 1999, 18, 705.
[58] Kulish E., Kolesov S., Akhmetkhanov R. and Minsker K.: Vysokomol. Soedin., 1993, 35B, 205.
[59] Kulish E., Kolesov S., Minsker K. and Zaikov G.: Int. J. Polym. Mater., 1994, 24, 123.
[60] Martemyanov V., Abdullin M., Orlova T. and Minsker K.: Neftekhimiya, 1981, 21, 123.
[61] Minsker K., Abdullin M., Zueva N., Martemyanov V. and Teplov B.: Plast. Massy, 1981, 9, 33.
[62] Minsker K. and Abdullin M.: Dokl. Akad. Nauk SSSR, 1982, 263, 140.
[63] Minsker K. and Zaikov G.: Chemistry of Chlorine-Containing Polymers: Synthesis, Disintegration, Stabilization. NOVA Science, Huntington 1999.