Polymeric materials are exposed to high temperatures that results in lowering of the film integrity. A blend of an epoxy resin with the silicone acrylate resin was developed to provide high heat resistance UV cured coatings. Earlier siliconized epoxy coatings had been developed by conventional curing. But due to environmental awareness, high productivity rate, low process costs and energy saving UV curable coatings are enjoying considerable growth. Thermally stable UV cured coatings used in the present study were developed from silicone acrylate and epoxy acrylate resin with different diluents and photoinitiator. Such coatings provide higher thermal stability (693 K) along with physical and chemical resistance. In addition, such coatings can also be obtained by using functional amino silanes. The resin developed provides a simple and practical solution to improve heat resistance along with physical and chemical resistance of the UV cured coatings. The purpose of this research paper is to develop UV curable heat resistant coatings by the combination of inorganic and organic polymer, taking epoxy acrylate as a base resin.
[1] Helfand D.: J. Coat. Tech., 1996, 68, 73.
[2] Wegmann A.: J. Coat. Tech., 1993, 65, 27.
[3] Ahmad S., Gupta A., Sharmin E. et al.: Prog. in Org. Coat., 2005, 54, 248.
[4] Kumar S., Denchev Z. and Alagar M.: Eur. Polym. J., 2006, 42, 2419.
[5] Kumar S. and Sankaranarayan T.: Prog. in Org. Coat., 2002, 45, 323.
[6] Preston J.: Heat Resistance of Polymers [in:] Encyclopedia of Chemical Technology, 2n edn., John Wiley & Co. New York 1967.
[7] Susumu F., Masaharu W. and Takkaki M.: Chemical Abstracts, 1987, 106, 85682d.
[8] Kimyasu S., Atsufumi S. and Masayuki E.: Chemical Abstracts, 1995, 122, 108844e.
[9] Li L., Xu W., Wu. Y. et al.: Prog. in Org. Coat., 2007, 53, 77.
[10] Kayanam-Apohan N., Amanoel A., Arsu N. and Gungor A.: Prog. in Org. Coat., 2004, 49, 23.
[11] Samuelsson J., Sundell P. and Johnson M.: Prog. in Org. Coat., 2004, 50, 193.
[12] Bongiovanni R., Sangermano M., Malucelli G. and Priola A.: Prog. in Org. Coat., 2005, 53, 46.
[13] Kim H., Ju H. and Hong J.: Eur. Polym. J., 2003, 39, 2235.
[14] Zhang J., Windall G. and Boyd I.: Appl. Surf. Sci., 2002, 186, 568.
[15] Hasegawa K., Matsumuto A. and Otsuko K.: Osaka Mini Tech. Res. Inst., 1996, 70,115.
[16] Korshak V. and Vinogrodova S.: [in:] Burdon J. (Ed.) Polyesters. Pergamon Press, Oxford 1995.
[17] Hood J., Blount W. and Sade W.: J. Coat. Techn., 1986, 58, 49.
[18] Urabanski J., Czerwinkski W., Janika K. et al.: Handbook of Analysis of Synthetic Polymers and Plastics. Ellis Horward ltd., Chicketa 1977.
[19] Lee H. and Neville K.: Handbook of Epoxy Resins. McGraw-Hill, New York 1982.
[20] Srivastava D. and Mathur G.: J. Macromol. Sci., 1997, 34, 59.
[21] Yee A. and Pearson R.: J. Mater. Sci., 1986, 21, 2475.