The aim of the study is to increase the bond strength of polychloroprene adhesives for footwear production. The main components of the polychloroprene adhesive composition is nairit NT, petrol BR1 or BR2, ethyl acetate grade A, leuconate. It has been found that leuconate in an amount of 5 % and microwave irradiation will increase a bond strength by 59 %. Modified adhesive composition may be recommended for production of special shoes that can withstand high mechanical loads.
[1] Kozar O., Konoval V. et al.: Key Eng. Mat., 2013, 559, 81.
[2] Danilova Yu. and Gvozdev Yu.: Kozhevenno-Obuvnaya Prom., 2010, 2, 46.
[3] Kozar O., Oliynikova V. and Konoval V.: 12th Baltic Polymer Symposium, Latvia, Liepaja 2012, 253.
[4] Poudzhokinete М. and Rayatskas V.: Kozhevenno-Obuvnaya Prom., 1998, 1, 45.
[5] Kozar O., Oliynikova V. et al.: 4th Int. Conf. on Advanced Materials and System, Romania, Bucharest 2012, 131.
[6] Kozar O. and Oliynikova V.: 12th Int. Scientific and Practical Conf. "MAT – Eco – Footwear 2012", Poland, Krakow 2012, 25.
[7] Voskresenskiy D.: Ustroistva SVC i Anteny. Radiotechnika, Moskwa 2006.
[8] Karliner М.: Electrodinamika SVC. Novosibirsk State Univ., Novosibirsk 1999.
[9] Dzhurinskiy К.: Miniatyurnye Koaxialnye Radiokomponenty dlya Microelektroniki SVC. Technosphera, Moskwa 2006.
[10] Standard ISO20234:2012 (E) – Requirements for clothing and footwear of special purpose.
[11] Medvid O., Oliynikova V.: Pat. UA 81312, Publ. June 25, 2013.
[12] Тechnicheskie Usloviya. Klei Leuconate TU 6-14-95-85. Izd-vo standartov, Moskwa 1985.
[13] State Standard 22307-77. Klei Obuvnye. Izd-vo standartov, Moskwa 1976.