: 75-82
Received: October 03, 2022
Revised: November 07, 2022
Accepted: November 15, 2022
Lviv Polytechnic National University, Department of building production
Lviv Polytechnic National University, Department of Building Production

The article proposes to balance processes with non-rhythmic flow-lines according to the period of work execution with the use of complex mechanized machines (CMM).

An increase in the period of deployment in the flow-line and downtime of non-critical works calculated by the Critical Path Method requires the development of optimization methods to reduce the construction period. We proposed a hypothesis to equalize work rhythms due to the redistribution of work volumes on interdependent divisions (ID) between CMMs.

A typical matrix model is used to compare the period of work execution. The calculation formulas are given for determining the execution time on the ID, the deployment period of the flow-line, the brigade, and the building.

There is a new method of optimizing the flow-line deployment period with the parallel use of complex mechanized machines proposed in the article. This method shortens the construction period.

Ivaneiko І.D., Oleksiv Y.М. (2015). Balancing the terms of execution of construction processes for the flow organization of works using universal machines. Ways of increasing the efficiency of construction in the conditions of the formation of market relations, 34, 103-114 [in Ukranian]. URL: http://nbuv.gov.ua/UJRN/shpebfrv_2016_34_14
Ivaneiko І.D., Mudryi I.B., Oleksiv Y.М. (2015). Forming and efficiency of technological design solutions of strip foundations erected from outside the pit. Modern technologies and methods of calculations in construction, 3, 79-92 [in Ukranian]. URL: http://nbuv.gov.ua/UJRN/stmrb_2015_3_14
Afanasiev V.A. (1990). Flow-line organization of construction. Leningrad [in Russian].
URL: http://aleph.lsl.lviv.ua:8991/F/?func=direct&doc_number=000275862&local_...
Ivaneiko І.D., Mudryi I.B. (2011). Study of the small volume of work for jib cranes during the construction of foundations in urban development. Urban development and spatial planning, 41, 178-183 [in Ukranian].
URL: http://nbuv.gov.ua/UJRN/MTP_2011_41_26
Maj T. (2007). Organszacja budowy. Warszawa.
URL: https://books.google.pl/books?id=jO-GGbZsFEsC&printsec=copyright&hl=pl#v...
Ivaneiko І.D., Oleksiv Y.М. (2016). [in Ukranian]
Ushatsky S.A., Sheiko Y.P., Triger G.M. (2007). Organization of construction. Kyiv [in Ukranian].
URL: https://www.yakaboo.ua/ua/organizacija-budivnictva.html
James E. Kelley and Morgan R. Walker (1959) Critical-path planning and scheduling. In Papers presented at the December 1-3, 1959, eastern joint IRE-AIEE-ACM computer conference (IRE-AIEE-ACM '59 (Eastern)). Association for Computing Machinery, New York, NY, USA, 160-173. https://doi.org/10.1145/1460299.1460318
Ivaneiko І.D., Ivaneiko M.M. (2020). Theoretical research into shortening construction times using integrated processes. Scientific bulletin of civil engineering,100(2), 119-126 [in Ukranian]. URL: http://nbuv.gov.ua/UJRN/Nvb_2020_100_2_21
Jason Chao-Hsien Pan, Jen-Shiang Chen, Chii-Ming Chao (2002). Minimizing tardiness in a two-machine flow-shop. Computers & Operations Research, 29, 869-875. DOI: https://doi.org/10.1016/S0305-0548(00)00090-3
Ivaneiko І.D., Ivaneiko M.M., (2021). Construction of prefabricated foundations in complex excavation sites. Modern technologies and methods of calculations in construction, 16, 53-61 [in Ukranian]. DOI: https://doi.org/10.36910/6775-2410-6208-2021-6(16)-07
Ivaneiko І.D., Oleksiv Y.М. (2016). Balancing non-rhythmic flow-lines by complex mechanized brigades. Urban development and spatial planning , 62, 222-227 [in Ukranian].
URL: http://nbuv.gov.ua/UJRN/MTP_2017_62%281%29__34
Determination of the duration of construction. DSTU B A.3.1-22:2013. National Standard of Ukraine. (2014). Kyiv: Ministry of Regional Development and Construction of Ukraine [in Ukrainian].
URL: https://dbn.co.ua/load/normativy/dstu/dstu_b_a_3_1_22/5-1-0-1109
Zavadskas E.K. (1991). System-technical evaluation of technological solutions of construction industry. Leningrad [in Russian].              
URL: http://aleph.lsl.lviv.ua:8991/F/?func=direct&doc_number=000158328&local_...
Kanyuka N.S., A.V. Rezunyk A.V., Novatskyi A.A. (1977). Complex mechanization of labor-intensive works in construction. Kyiv [in Russian]. URL: http://ecat.diit.edu.ua/cgi-bin/irbis64r_12/cgiirbis_64.exe?LNG=&C21COM=...
Shumakov I. V. (2015). Theoretical and methodological principles of the formation of organizational and technological solutions for the construction of the underground part of civil buildings (Doctoral dissertation abstract) [in Ukranian].
URL: http://aleph.lsl.lviv.ua:8991/F/?func=direct&doc_number=000499960&local_...
Schaller J. (2005). Note on minimizing total tardiness in a two-machine flowshop. Computers & Operations Research. 32(12), 3273-3281. DOI: https://doi.org/10.1016/j.cor.2004.05.012
Shumakov I. V., Mikautadze, R. I., & Lyakhov, I. I. (2018). Optimization Trends in Forecasting the Duration of Construction. Scientific Bulletin of Civil Engineering, 91(1), 115-121 [in Russian].
URL: http://nbuv.gov.ua/UJRN/Nvb_2018_91_1_17
Shatrova I.A. (2006). Optimization of civil engineering work duration (Ph. D. dissertation abstract) [in Ukranian]. URL: http://irbis-nbuv.gov.ua/aref/20081124028795
Radkevich A.V. (2006). Systematic aspects of organization - technological decisions of renewal of objects of transport complex (Doctoral dissertation abstract) [in Ukranian].
URL: http://irbis-nbuv.gov.ua/aref/20081124045314