In this article on increasing the efficiency of steel combined structures, the tasks of rational design, regulation and control of structural parameters of elements, the use of steels with increased mechanical properties are considered. It is shown that for a six-span stiffening girder of a combined truss with elastic supports, which operates under a distributed load, the moment is 72 times smaller than the moment of a single-span beam. It is suggested to use high-strength steel for truss braces. Rationality criteria are proposed. On the basis of rationality criteria, new steel combined trusses were developed and their models were designed for stress tests. The results of experimental studies of models of combined trusses are presented. The results of experimental studies conducted on models of steel combined trusses qualitatively and quantitatively confirmed the theoretical results obtained on the basis of the proposed theory.
Afshan S., Theofanous M., Wang J., Gkantou M.,Gardner L. (2019). Testing, numerical simulation and design of prestressed high strength steel arched trusses. March 2019. Engineering Structures 183, 510-522. https://doi.org/10.1016/j.engstruct.2019.01.007
https://doi.org/10.1016/j.engstruct.2019.01.007
Brütting J., Desruelle J., Senatore G., Fivet C. (2019). Design of truss structures through reuse. In Structures. Journal of the international association for shell and spatial structures: j. IASS volume 18, pages 128-137. Elsevier. https://doi.org/10.1016/j.istruc.2018.11.006
https://doi.org/10.1016/j.istruc.2018.11.006
Chichulina K., and Chichulin V. (2020). Light-Weight Structures: Proposals of Resource-Saving Supporting Structures. Inbook: Trussand Frames - Recent Advances and New Perspectives. http://dx.doi.org/10.5772/intechopen.88237
https://doi.org/10.5772/intechopen.88237
Fang, S.-E.; Wu, C.; Zhang, X.-H.; Zhang, L.-S.; Wang, Z.-B.; Zeng, Q.-Y. (2021). Progressive Collapse Safety Evaluation of Truss Structures Considering Material Plasticity. Materials 2021, 14, 5135. https:// doi.org/10.3390/ma14185135
https://doi.org/10.3390/ma14185135
Farkas J, Jarmai K. (2008). Tubular structures. In: Design and Optimization of Metal Structures. 1st ed. Cambridge: Elsevier, Woodhead Publishing; 225-251. https://doi.org/10.1533/9781782420477.225
https://doi.org/10.1533/9781782420477.225
Fiore, A., Marano, G.C., Greco, R. etal. (2016). Structural optimization of hollow-section steel trusses by differential evolution algorithm. Int J SteelStruct 16, 411-423. https://doi.org/10.1007/s13296-016-6013-1
https://doi.org/10.1007/s13296-016-6013-1
Gkantou M., M. Theofanous M., Baniotopoulos C. (2015). Оptimisation of high strength steel prestressed trusses. 8th GRACM International Congresson Computational Mechanics, Volos, 12 July - 15 July 2015. P.10. https://doi.org/10.1007/s11709-019-0547-1
https://doi.org/10.1007/s11709-019-0547-1
Hohol M. V. (2018). Tension regulation in steel combined structures [monograph]. Kyiv, Stal, 222 p (in Ukrainian). https://bit.ly/3FBL97l
Hohol M., Peleshko I., Petrenko O., Sydorak D. (2021). Analysis of calculation regulation methods in steel combined trusses. Theory and Building Practice. 3(1), 64-71. https://doi.org/10.23939/jtbp2021.01.
https://doi.org/10.23939/jtbp2021.01
Huiyong Cui, Haichao An, and Hai Huang. (2018).Truss topology optimization considering local buckling constraints and restrictions on intersection and overlap of bar members. Structural and Multidisciplinary Optimization, 58(2):575-594, 2018. https://doi.org/10.1007/s00158-018-1910-x.
https://doi.org/10.1007/s00158-018-1910-x
Pichugin S., Gasenko A., Dmitrenko A., Kramar A. (2013) Technical and economic comparison of light steel structures of summer stage cover. Resource-saving materials, structures, buildings and structures. 25, 576-582. (in Ukrainian). http://reposit.nupp.edu.ua/bitstream/PoltNTU/7722/1/rmkbs_2013_25_1.pdf
Tiainen T., Mela K., Jokinen T., Heinisuo M.(2013). High strength steel intubular trusses, Proceedings of the METNET Seminar 2013 in Lulea, 56-59. https://ssabwebsitecdn.azureedge.net/-/media/files/en/hollow-sections/te...
Ruiz-Teran, A., Aparicio, A. (2010). Developments in under-deck and combined cable-stayed bridges. Bridge engineering, 163, 67-78 https://doi.org/10.1680/bren.2010.163.2.67
https://doi.org/10.1680/bren.2010.163.2.67
Lavrinenko, L., Zotina, A. (2019). Effective parameters of low-element sprung trusses with the use of I-beams with corrugated walls. Building structures. Theory and practice, 4, 56-69 https://doi.org/10.32347/2522-4182.4.2019.56-59
https://doi.org/10.32347/2522-4182.4.2019.56-69
Ruiz-Teran, A. M., & Aparicio, A. C. (2008). Structural behaviour and design criteria of under-deck cable-stayed bridges and combined cable-stayed bridges. Part 1: Single-span bridges. Canadian Journal of Civil Engineering, 35(9), 938-950. doi.org/10.1139/L08-033
https://doi.org/10.1139/L08-033
Bendsoe, M., Sigmund, O. (2003). Topology Optimization. Theory, Methods and Applications. Springer Verlag, Berlin Heidelberg https://doi.org/10.1007/978-3-662-05086-6
https://doi.org/10.1007/978-3-662-05086-6