FEATURES OF THE MIX TIME OF BITUMEN EMULSIONS WITH CEMENT FOR SLURRY SURFACING TECHNOLOGY

2023;
: 12-17
https://doi.org/10.23939/jtbp2023.02.012
Received: August 26, 2023
Revised: October 05, 2023
Accepted: November 03, 2023
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University, Department of highways and bridges
3
Lviv Polytechnic National University, Department of Highways and Bridges
4
Lviv Polytechnic National University, Ukraine

Pavement grade cationic bitumen emulsions formulations were developed for Slurry Surfacing based on orthophosphoric and hydrochloric acids with both all-purpose and specialized emulsifiers used. As a result, there were established relations of mix time upon cement - for Slurry Surfacing based on various acids and emulsifiers. Mix time of Slurry Surfacing mix (having different cement content) with bitumen emulsions on both orthophosphoric and hydrochloric acids is characterized by parabolic relation, branches of the parabola going down. Still, parabola slope steepness for Slurry Surfacing with cement and bitumen emulsions on orthophosphoric acid is higher than for emulsions on hydrochloric acid. The regularity investigated allows affirming that dosing cement for Slurry Surfacing with orthophosphoric-based bitumen emulsions shall be more diligently checked and controlled – so as to avoid the premature mix time.

Saghafi, M., Asgharzadeh, S., Aria, F., Arash, H. (2019). Image Processing Method to Estimate the Wearing Condition of Slurry Seal Mixtures. International Airfield and Highway Pavements Conference, 424-435. 10.1061/9780784482452.042.
https://doi.org/10.1061/9780784482452.042
Dong, Q.,  Xueqin, C., Baoshan, H., Xingyu, G. (2018). Analysis of the Influence of Materials and Construction Practices on Slurry Seal Performance Using LTPP Data. Journal of Stomatology. 144. 10.1061/JPEODX.0000069.
https://doi.org/10.1061/JPEODX.0000069
Son, H., Kim, Y., Lim, J., Kwon, S., Hong, J., Shin, H. (2014). Influences of Curing Time on Polymer-Modified Emulsion Used for Slurry Seal and Micro-Surfacing Mixes. Geo-Hubei 2014 International Conference on Sustainable Civil Infrastructure, 35-42. 10.1061/9780784478493.005.
https://doi.org/10.1061/9780784478493.005
Apaza, F., Guimarães, A., Vivoni, A., Schroder, R. (2021). Evaluation of the performance of iron ore waste as potential recycled aggregate for micro-surfacing type cold asphalt mixtures, Construction and Building Materials, 266, 121020, ISSN 0950-0618, https://doi.org/10.1016/j.conbuildmat.2020.121020.
https://doi.org/10.1016/j.conbuildmat.2020.121020
Grilli, A., Graziani, A., Carter, A., Sangiorgi, C., Pivoto Specht, L., Copetti Callai, S. (2019). Slurry Surfacing: A Review of Definitions, Descriptions and Current Practices. RILEM Tech Lett 2019, 4, 103-109, 10.21809/rilemtechlett.2019.91.
https://doi.org/10.21809/rilemtechlett.2019.91
Terrones-Saeta, J., Suárez-Macías, J., Iglesias-Godino, F., Corpas-Iglesias, F. (2020). Development of Slurry Surfacing with Electric Arc Furnace Slag for Pavements with Friction Problems. Minerals, 10, 878. https://doi.org/10.3390/min10100878
https://doi.org/10.3390/min10100878
Johannes, P. (2014). Development of an Improved Mixture Design Framework for Slurry Seals and Micro-Surfacing Treatments, (Doctor of Philosophy dissertation). Available from ProQuest Dissertations & Theses database. (UMI No. 3624945) https://www.proquest.com/openview/3bae6e1e6d8ec3ce677de43cf989f04d/1?pq-...
Destrée, A., Vansteenkiste, S., Tanghe, T., Visscher, J. (2022). Reliable Laboratory Tests: A Prerequisite for the Design of High-Quality Slurry Surfacing Mixtures. Advances in Materials Science and Engineering, 2022, 1-20. 10.1155/2022/7157233.
https://doi.org/10.1155/2022/7157233
Usman, K., Hainin, M., Idham, M., Warid, M., Yaacob, H., Hassan, N., Azman, M., Puan, O. (2019). Performance evaluation of asphalt micro surfacing - a review, IOP Conference Series: Materials Science and Engineering, 527, DOI:10.1088/1757-899X/527/1/012052
https://doi.org/10.1088/1757-899X/527/1/012052
Johannes, P., Bahia, H.,  Mturi, G. (2019). Evaluation of the suitability of the automated mixing test in determining the workability of slurry surfacing mixes, http://hdl.handle.net/10204/11206
Izadi, A., Zalnezhad, M., Makerani, P.,  Zalnezhad, H. (2020). Mix design and performance evaluation of coloured slurry seal mixture containing natural iron oxide red pigments. Road Materials and Pavement Design, 23, 1-18. 10.1080/14680629.2020.1860803.
https://doi.org/10.1080/14680629.2020.1860803
Pyshyev, S., Grytsenko, Y., Solodkyy, S., Sidun, I., Vollis, O. (2015). Using bitumen emulsions based on oxidized, distillation and modified oxidized bitumens for slurry seal production. Chem Chem Technol, 9(3), 359-366. https://doi.org/10.23939/chcht09.03.359
https://doi.org/10.23939/chcht09.03.359
Sidun I., Vollis O., Solodkyy S., Gunka V. (2019). Cohesion of Slurry Surfacing  Mix with Slow Setting Bitumen Emulsions. In: Blikharskyy Z., Koszelnik P., Mesaros P. (eds) Proceedings of CEE 2019. CEE 2019. Lecture Notes in Civil Engineering, vol 47. Springer, Cham 10.1007/978-3-030-27011-7_53
https://doi.org/10.1007/978-3-030-27011-7_53
Sidun, I., Solodkyy, S., Vollis, O., Gunka, V. (2021). Cohesion of Slurry Surfacing  Mix on Bitumens of Different Acid Numbers at Different Curing Temperatures. EcoComfort 2020, LNCE 100, pp.429-435, DOI:10.1007/978-3-030-57340-9_52
https://doi.org/10.1007/978-3-030-57340-9_52
Hajj E. Y., Loria L., Sebaaly P. E., Borroel C. M., Leiva P. (2011). Optimum Time for Application of Slurry Seal to Asphalt Concrete Pavements. Transportation Research Record., 2235(1):66-81. DOI:10.3141/2235-08.
https://doi.org/10.3141/2235-08
Hwan, K.H., Broughton, B., Lee, M.S., Lee, S.J. (2015). Microsurfacing Successes and Failures. Journal of the Korean Society of Road Engineers, 17(2), 71-78. DOI: 10.7855/ijhe.2015.17.2.071.
https://doi.org/10.7855/IJHE.2015.17.2.071
Wang, F., Liu, Y.,  Hu, Sh. (2013). Effect of early cement hydration on the chemical stability of asphalt emulsion. Construction and Building Materials. 42. 146-151. https://doi.org/10.1016/j.conbuildmat.2013.01.009
https://doi.org/10.1016/j.conbuildmat.2013.01.009
Sidun, I., Vollis, O.,  Gunka, V., Ivasenko, V. (2020). Hydrochloric and Orthophosphoric Acids Use in the Quick-Traffic Slurry Surfacing Mix. Chemistry & Chemical Technology, 14, 380-385. 10.23939/chcht14.03.380
https://doi.org/10.23939/chcht14.03.380
Sidun,I.,Vollis,O.,Hidei,V., Bidos,V.(2021). Quick-traffic slurry surfacing mix with orthophosphoric acid. Production Engineering Archives, 27(3), 191-195. https://doi.org/10.30657/pea.2021.27.25
https://doi.org/10.30657/pea.2021.27.25
Sidun, I., Vollis, O., Bidos, V., Turba, Y. (2023). Versions of Orthophosphoric Acids for Slurry Surfacing  Mix. In: Blikharskyy, Z. (eds) Proceedings of EcoComfort 2022. EcoComfort 2022. Lecture Notes in Civil Engineering, vol 290. Springer, Cham. https://doi.org/10.1007/978-3-031-14141-6_40.
https://doi.org/10.1007/978-3-031-14141-6_40