Noise immunity is one of the essential characteristics of modern wireless data reception/transmission systems. In wireless systems such as Wi-Fi, HiperLan, or Bluetooth, the signal is propagated by electromagnetic oscillations in the environment. However, unlike wiring systems, these oscillations are unprotected from external influences. Noise immunity is one of the essential characteristics of modern wireless data reception/transmission systems. Moreover, if several wireless systems work close enough to each other, there is a possibility of overlapping waves, which will damage the information signal. It is determined that for the tasks of control of unmanned aerial vehicles and mobile robotic complexes increasing the noise immunity of data transmission channels is an urgent problem. It has been investigated that Barker-like code sequences based on ideal ring bundles provide an increase in the power of the obtained sequences by optimizing the parameters of the ideal ring bundles used. It is determined that the increase of noise immunity during data reception and transmission is achieved by choosing the optimal ratios of the parameters of the ideal ring bundle. It is shown that the advantages of Barker-like code sequences such as the optimal ratio between the length of the sequence and its correcting ability, the ability to change the length of the sequence depending on the level of interference are widely used in modern wireless communication and telecommunications systems. The method of synthesis of Barker-like code sequences with the use of ideal ring bundles has been improved, which, by taking into account the ratios of the parameters of ideal ring bundles, provides the choice of the minimum bit code sequence that takes into account the level of interference. A simulation model of synthesis of Barker-like code sequences, noise generation, and error correction has been developed on the basis of the improved method of synthesis of Barker-like code sequences. The developed simulation model is used to study the processes of coding, decoding, detection, and correction of errors in the obtained Barker-like code sequences. It has been investigated that the use of synthesized Barker-like code sequences based on ideal ring bundles provides data recovery of damaged no more than 25 % of the bits of each codeword, and detects up to 50 % of damaged bits in each codeword.
- Ahmad, J., Akula, A., Mulaveesala, R., & Sardana, H. K. (2019). Barker-Coded Thermal Wave Imaging for Non-Destructive Testing and Evaluation of Steel Material. IEEE Sensors Journal, 19(2), 735–742, 15 Jan.15, 2019. https://doi.org/10.1109/JSEN.2018.2877726
- Banket, V. & Manakov, S. (2018). Composite Walsh-Barker Sequences, 9th International Conference on Ultrawideband and Ultrashort Impulse Signals (UWBUSIS), Odessa, 343–347. https://doi.org/10.1109/UWBUSIS.2018.8520220
- Fu, J., & Ning, G. (2018). Barker coded excitation using pseudo chirp carrier with pulse compression filter for ultrasound imaging, BIBE 2018; International Conference on Biological Information and Biomedical Engineering, Shanghai, China, 1–5.
- Riznyk, O., Kynash, Yu., Povshuk, O., & Balych, B. (2017). Information technologies of optimization of structures of the systems are on the basis of combinatorics methods, 12th International Scientific and Technical Conference on Computer Sciences and Information Technologies (CSIT), Lviv, 232–235. https://doi.org/10.1109/STC-CSIT.2017.8098776
- Riznyk, O., Kynash, Yu., Povshuk, O., & Noga, Y. (2018). The Method of Encoding Information in the Images Using Numerical Line Bundles," 2018 IEEE 13th International Scientific and Technical Conference on Computer Sciences and Information Technologies (CSIT), Lviv, 80–83. https://doi.org/10.1109/STC-CSIT.2018.8526751
- Riznyk, O., Povshuk, O., Kynash, Y., & Yurchak, I. (2017). Composing method of anti-interference codes based on non-equidistant structures, 2017 XIIIth International Conference on Perspective Technologies and Methods in MEMS Design (MEMSTECH), Lviv, 15–17. https://doi.org/10.1109/MEMSTECH.2017.7937522
- Riznyk, O., Povshuk, O., Noga, Y., & Kynash, Yu. (2018). Transformation of Information Based on Noisy Codes, 2018 IEEE Second International Conference on Data Stream Mining & Processing (DSMP), Lviv, 162–165. https://doi.org/10.1109/DSMP.2018.8478509
- Tsmots, I., Rabyk, V., Riznyk, O., & Kynash, Y. (2019). Method of Synthesis and Practical Realization of Quasi-Barker Codes. 2019 IEEE 14th International Conference on Computer Sciences and Information Technologies (CSIT), Lviv, Ukraine, 2019, 76–79. https://doi.org/10.1109/STC-CSIT.2019.8929882
- Vienneau, E., & Byram, B. (2020). Compound barker-coded excitation for increasedsignal-to-noise ratio and penetration depth in transcranial ultrasound imaging, 2020 IEEE International Ultrasonics Symposium (IUS), 2020, 1–4. https://doi.org/10.1109/IUS46767.2020.9251650
- Wang, M., Cong, S., & Zhang, S. (2018). Pseudo Chirp-Barker-Golay coded excitation in ultrasound imaging, 2018 Chinese Control And Decision Conference (CCDC), Shenyang, 2018, 4035–4039. https://doi.org/10.1109/CCDC.2018.8407824
- Wang, M., Cong, S., & Zhang, S. (2018). Pseudo Chirp-Barker-Golay coded excitation in ultrasound imaging, 2018 Chinese Control And Decision Conference (CCDC), Shenyang, 2018, 4035–4039. https://doi.org/10.1109/CCDC.2018.8407824
- Wang, S., & He, P. (2018). Research on Low Intercepting Radar Waveform Based on LFM and Barker Code Composite Modulation, 2018 International Conference on Sensor Networks and Signal Processing (SNSP), Xian, China, 297–301. https://doi.org/10.1109/SNSP.2018.00064
- Xia, S., Li, Z., Jiang, C., Wang, S. & Wang, K. (2018). Application of Pulse Compression Technology in Electromagnetic Ultrasonic Thickness Measurement, 2018 IEEE Far East NDT New Technology & Application Forum (FENDT), Xiamen, China, 37–41. https://doi.org/10.1109/FENDT.2018.8681975