Vol. 10, No. 2, 2024 | Academic Journals and Conferences

In this Number

(7 papers)

INTERACTION OF THE FLOW OF FLUSHING FLUID WITH THE DRILL PIPES AND THE WALL OF THE WELL

Yevgen Kharchenko , Dmytro Butrynskyi

DOI: https://doi.org/10.23939/ujmems2024.02.001

1-14

COMPARATIVE ANALYSIS OF METHODS FOR CUTTING SPUR GEARS BASED ON TECHNICAL AND ECONOMIC PARAMETERS

Ihor Hrytsai, Dmytro Herus, Serhii Hromniuk

DOI: https://doi.org/10.23939/ujmems2024.02.015

15-24

INVESTIGATION OF OSCILLATIONS IN A SYSTEM WITH NONLINEAR ELASTIC CHARACTERISTICS

Ihor Kuzio, Yurii Sholoviy, Nadiia Maherus

DOI: https://doi.org/10.23939/ujmems2024.02.025

25-32

SIMULATION OF THE GEARS STRESS-STRAIN STATE OF ELBOW ORTHOSIS PLANETARY GEARBOX

Iaroslav Lavrenko, Maksym Sushchenko, Olena Chaikovska

DOI: https://doi.org/10.23939/ujmems2024.02.033

33-45

STUDY OF THE CUTTING FORCE BASED ON THE OBTAINED UNDEFORMED CHIPS DURING CUT IN WHEN MACHINING AN INTERNAL GEAR BY POWER SKIVING METHOD

Andrii Slipchuk

DOI: https://doi.org/10.23939/ujmems2024.02.046

46-56

LOADING OF THE MAIN ELEMENTS OF THE FREE WHELL BALL COUPLING

Oleh Sorokivskyi

DOI: https://doi.org/10.23939/ujmems2024.02.057

57-65

INCREASE PRODUCTIVITY OF HARD-TO-MACHINE MATERIALS BY PREVENTIVE HEATING OF THE WORKPIECE

Vadym Stupnytskyy, Serhij Pasternak, Oleh Prodanchuk

DOI: https://doi.org/10.23939/ujmems2024.02.066

66-80