SIMULATION OF THE GEARS STRESS-STRAIN STATE OF ELBOW ORTHOSIS PLANETARY GEARBOX

Received: April 04, 2024
Revised: April 19, 2024
Accepted: May 02, 2024
1
National Technical University of Ukraine "Ihor Sikorsky Kyiv Polytechnic Institute"
2
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”
3
National Technical University of Ukraine “Igor Sikorsky Kyiv Polytechnic Institute”

Gear transmissions of various sizes are used in various fields of mechanical engineering, automotive, marine, and aerospace industries according to the needs. This paper presents the modeling and analysis of the modal and harmonic characteristics of a planetary gear transmission for an elbow orthosis. Orthoses are used during the rehabilitation of patients in the postoperative period or during the restoration of lost limb functions. When modeling the planetary gear, the connection elements are made of 45 steel and PLA polylactide. Using ANSYS Workbench, the planetary gear of the gearbox was analyzed for modal and harmonic characteristics at three different torque values: 1732 N-mm, 3464 N-mm, 5196 N-mm. The modal and harmonic analysis of the stress-strain state of the planetary gear is carried out, a comparative analysis is performed, and the vibration characteristics, including natural frequencies, mode shapes, and harmonic response, are discussed. Also, the stress-strain state of the sun-satellite contact problem made of steel 45 and PLA polylactide is calculated and the corresponding analytical calculation of equivalent contact stresses is performed according to Hertz's theory.

[1] U. Urbas, D. Zorko and N. Vukasinovic, “Machine learning based nominal root stress calculation model for gears with a progressive curved path of contact”, Mechanism and Machine Theory, 165, 104430, 2021. https://doi.org/10.1016/j.mechmachtheory.2021.104430

[2] S.-C. Hwang et al., “Contact stress analysis for a pair of mating gears”, Mathematical and Computer Modelling, Vol. 57, pp. 40–49, 2013. https://doi.org/10.1016/j.mcm.2011.06.055

[3] Santosh S. Patil, Saravanan Karuppanan, Ivana Atanasovska, Azmi Abdul Wahab, “Contact stress analysis of helical gear Pairs, including frictional Coefficients”, International Journal of Mechanical Sciences, Vol. 85, pp. 205-211, 2014. https://doi.org/10.1016/j.ijmecsci.2014.05.013

[4] Y.-C. Chen, C.-B. Tsay, “Stress analysis of a helical gear set with localized bearing contact”, Finite Elements in Analysis and Design, Vol. 38, pp. 707 – 723, 2002. https://doi.org/10.1016/S0168-874X(01)00100-7

[5] S.S. Patil et al., “Experimental measurement of strain and stress state at the contacting helical gear pairs”, Measurement, Vol. 82, pp. 313–322, 2016. https://doi.org/10.1016/j.measurement.2015.12.046

[6] S. Jyothirmai et al., “A Finite Element Approach to Bending, Contact and Fatigue Stress Distribution in Helical Gear Systems”, Procedia Materials Science, Vol. 6, pp. 907 – 918, 2014. https://doi.org/10.1016/j.mspro.2014.07.159

[7] R. Kurbet, V. Doddaswamy, C.M. Amruth et al., “Frequency response analysis of spur gear pair using FEA”, Materials Today: Proceedings, Vol. 52, pp. 2327–2338, 2022. https://doi.org/10.1016/j.matpr.2021.12.517

[8] Narendiranath Babu T et al., “Contact Stress Analysis on Composite Spur Gear using Finite Element Method”, Materials Today: Proceedings, Vol. 5, pp. 13585–13592, 2018. https://doi.org/10.1016/j.matpr.2018.02.354

[9] Z. Zhao, H. Han, P. Wang et al. “An improved model for meshing characteristics analysis of spur gears considering fractal surface contact and friction”, Mechanism and Machine Theory, Vol. 158, 104219, 2021. https://doi.org/10.1016/j.mechmachtheory.2020.104219

[10] I. Gonzalez-Perez et al., “Implementation of Hertz theory and validation of a finite element model for stress analysis of gear drives with localized bearing contact”, Mechanism and Machine Theory, Vol. 46, pp. 765–783, 2011. https://doi.org/10.1016/j.mechmachtheory.2011.01.014

[11] S. Li, “Effects of centrifugal load on tooth contact stresses and bending stresses of thin-rimmed spur gears with inclined webs”, Mechanism and Machine Theory, Vol. 59, pp. 34–47, 2013. https://doi.org/10.1016/j.mechmachtheory.2012.08.011

[12] T. Jabbour, G. Asmar, “Tooth stress calculation of metal spur and helical gears”, Mechanism and Machine Theory, Vol. 92, pp. 375–390, 2015. https://doi.org/10.1016/j.mechmachtheory.2015.06.003

[13] Q. Wen, Q. Du and X. Zhai, “Analytical calculation of the tooth surface contact stress of spur gear pairs with misalignment errors in multiple degrees of freedom”, Mechanism and Machine Theory, Vol. 149, 103823, 2020. https://doi.org/10.1016/j.mechmachtheory.2020.103823

[14] A.W. Hussein and M.Q. Abdullah, “High-contact ratio spur gears with conformal contact and reduced sliding”, Results in Engineering, Vol. 14, 100412, 2022. https://doi.org/10.1016/j.rineng.2022.100412

[15] M.L. Puneeth and G Mallesh, “Static contact behavior of asymmetric spur gear”, Materials Today: Proceedings, 2021. https://doi.org/10.1016/j.matpr.2021.06.076

[16] M.L. Puneeth and G. Mallesh, “Dynamic contact behavior of asymmetric spur gear”, Materials Today: Proceedings, Vol. 44, pp. 2019–2027, 2021. https://doi.org/10.1016/j.matpr.2020.12.125

[17] G. Gambirasio, M. Pesenti et al., “Design and Integration of a Low-Back Exoskeleton: A 3D-Printed Cycloidal Drive Actuator for Flexible Human-Robot Interaction”, Computer-Aided Design & Applications, Vol. 21(5), pp. 791-806, 2024. https://doi.org/10.14733/cadaps.2024.791-806