1. UJMEMS
  2. All Volumes and Issues
  3. Vol. 10, No. 3, 2024

Vol. 10, No. 3, 2024

In this Number

(7 papers)
OPTIMAL PHASE DIFFERENCE BETWEEN LONGITUDINAL AND NORMAL OSCILLATIONS WITH PIECEWISE CONSTANT ACCELERATION DURING VIBRATORY CONVEYING
Ihor Vrublevskyi
DOI: https://doi.org/10.23939/ujmems2024.03.001
1-10
DETERMINATION OF GEOMETRIC PARAMETERS OF UNDEFORMED CHIPS AT THE STAGE OF CUT IN DURING MULTI-PASS CUTTING OF THE INTERNAL GEAR BY POWER SKIVING
Andrii Slipchuk
DOI: https://doi.org/10.23939/ujmems2024.03.010
10-18
CURRENT STATE AND PROSPECTS OF USING DIAMOND TOOLS FOR PROCESSING NATURAL AND ARTIFICIAL STONE
Yurii Boiko, Andriy Trostianchyn
DOI: https://doi.org/10.23939/ujmems2024.03.019
19-38
EFFECT OF CARBON CONTENT IN STEELS ON THE FORMATION OF THE STRENGTHENED LAYERS DURING THERMO-DEFORMATION TREATMENT
Ihor Hurei, Volodymyr Gurey, Tetiana Hurei, Yurii Kholod, Rostyslav Hera
DOI: https://doi.org/10.23939/ujmems2024.03.039
39-47
MODELING OF FREE AND FORCED LONGITUDINAL OSCILLATIONS OF A STRAIGHT ROD USING THE DIRECT DISCRETIZATION METHOD
Yevhen Kharchenko, Andriy Bilovus
DOI: https://doi.org/10.23939/ujmems2024.03.048
48-62
A REVIEW AND ANALYSIS OF THE INFLUENCE OF TECHNOLOGICAL PARAMETERS ON THE EFFICIENCY OF PROCESSING HARD-TO-MACHINE MATERIALS
Oleh Prodanchuk, Nataliya Stupnytska, Taras Olenuk
DOI: https://doi.org/10.23939/ujmems2024.03.063
63-77
STRUCTURE AND PROPERTIES OF COMPOSITE REINFORCEMENT WITH UNIDIRECTIONAL FIBERS
Tetiana Tepla, Taras Kovbasiuk, Ihor Lemishka, Maksym Palchevskii
DOI: https://doi.org/10.23939/ujmems2024.03.078
78-85