Vol. 10, No. 4, 2024 | Academic Journals and Conferences

In this Number

(9 papers)

ASSESSMENT OF THE APPLICABILITY OF CAST STEELS FOR MANUFACTURING SHAFT CRUSHER COMPONENTS

Sviatoslav Fyk

DOI: https://doi.org/10.23939/ujmems2024.04.001

1-8

ANALYSIS OF DESIGN AND TECHNOLOGY FEATURES OF INDUSTRIAL SHREDDERS

Sviatoslav Fyk, Vadym Stupnytskyy

DOI: https://doi.org/10.23939/ujmems2024.04.009

9-16

NOVEL CONCEPTS AND DESIGNS OF INERTIAL VIBRATION EXCITERS FOR INDUSTRIAL VIBRATORY EQUIPMENT: A REVIEW

Vitaliy Korendiy, Andy Augousti, Olena Lanets, Taras Vilchynskyi, Vladyslav Kyrychuk, Oleksandr Yaniv, Roman Protasov

DOI: https://doi.org/10.23939/ujmems2024.04.017

17-33

STRENGTH INVESTIGATION OF A STRUCTURAL ELEMENT OF A LABORATORY CENTRIFUGE

Iaroslav Lavrenko, Tetiana Sydora

DOI: https://doi.org/10.23939/ujmems2024.04.034

34-45

CALCULATION OF THE STRENGTH OF THE ELEMENTS OF THE FREE-WHEEL BALL CLUTCH OF A BICYCLE

Volodymyr Malashchenko, Oleh Sorokivskyi

DOI: https://doi.org/10.23939/ujmems2024.04.046

46-53

DETERMINING THE INFLUENCE OF CONTINUOUS SECTION SHAPE AND DIMENSIONS ON STRESSES OVER A WIDE RANGE OF VIBRATION FREQUENCY

Pavlo Maistruk , Oleksii Lanets, Volodymyr Maistruk

DOI: https://doi.org/10.23939/ujmems2024.04.054

54-69

ANALYSIS AND DEVELOPMENT OF A CUTTING FORCE MEASUREMENT SYSTEM UNDER PRE-HEATING CONDITIONS OF THE WORKPIECE

Serhij Pasternak, Vadym Stupnytskyy

DOI: https://doi.org/10.23939/ujmems2024.04.070

70-78

COMPARATIVE ANALYSIS OF INVOLUTE AND SINUSOIDAL GEAR TRANSMISSIONS IN MACHINE DRIVES UNDER CONTACT AND FRICTION CONDITIONS

Ihor Hrytsai, Bohdan Stoliar, Serhii Hromniuk

DOI: https://doi.org/10.23939/ujmems2024.04.079

79-85

AIR FLOW DYNAMICS IN THE CABIN OF A LOW-ENTRY CITY BUS

Konstantyn Golenko, Orest Voznyak, Igor Vikovych , Oleh Kotsiumbas, Yevheniia Yakovenko, Ilona Drach

DOI: https://doi.org/10.23939/ujmems2024.04.086

86-94