Volume 5, Number 2, 2019 | Academic Journals and Conferences

In this Number

(8 papers)

Theory and practice of obtaining composite materials based on polymer blends

Karam Shixaliyev, Ibrahim Abbasov, Khaver Sadig

DOI: https://doi.org/10.23939/ujmems2019.02.001

1-15

The influence of metal oxide powders on the physical and mechanical properties of epoxy composites for the protection of constructions made of aluminum alloys

Petro Savchuk, Dmytro Matrunchyk, Vitalii Kashytskyi, Oksana Sadova, Iryna Moroz

DOI: https://doi.org/10.23939/ujmems2019.02.016

16-24

Modeling of elastic state for two joined dissimilar semi-infinite plates with crack under the action of pressure on the shores of the crack

Volodymyr Zelenyak, Liubov Kolyasa

DOI: https://doi.org/10.23939/ujmems2019.02.025

25-32

Optimization of geometric parameters of a semi-spheroidal solid oxide fuel cell anode using the 3D stress and strain distribution graphs

Ihor Kuzio, Bogdan Vasyliv, Vitaliy Korendiy, Volodymyr Borovets

DOI: https://doi.org/10.23939/ujmems2019.02.033

33-42

Simulation of micro-cutting in the process of finishing anti-friction non-abrasive treatment

Ihor Shepelenko, Yuriy Tsekhanov, Yakiv Nemyrovskyi, Eduard Posvyatenko, Pavlo Eremin

DOI: https://doi.org/10.23939/ujmems2019.02.043

43-52

Solution of the equation of force of impact of solids expressed by the Ateb-sine

Vasyl Olshanskiy, Volodymyr Burlaka, Maksym Slipchenko

DOI: https://doi.org/10.23939/ujmems2019.02.053

53-60

Calculation of strength of heated curvilinear bar structural elements of tubular cross-sections

Мykola Voytovych , Lev Velychko, Roman Lampika, Khrystyna Lishchynska

DOI: https://doi.org/10.23939/ujmems2019.02.061

61-67

Structural and kinematic analysis of pantograph-type manipulator with three degrees of freedom

Vitaliy Korendiy, R. V. Zinko, Yurii Cherevko

DOI: https://doi.org/10.23939/ujmems2019.02.068

68-82