Volume 5, Number 2, 2019

У цьому номері

(8 статей)
Theory and practice of obtaining composite materials based on polymer blends
Karam Shixaliyev, Ibrahim Abbasov, Khaver Sadig
DOI: https://doi.org/10.23939/ujmems2019.02.001
1-15
The influence of metal oxide powders on the physical and mechanical properties of epoxy composites for the protection of constructions made of aluminum alloys
Petro Savchuk, Dmytro Matrunchyk, Vitalii Kashytskyi, Oksana Sadova, Iryna Moroz
DOI: https://doi.org/10.23939/ujmems2019.02.016
16-24
Modeling of elastic state for two joined dissimilar semi-infinite plates with crack under the action of pressure on the shores of the crack
Volodymyr Zelenyak, Любов Коляса
DOI: https://doi.org/10.23939/ujmems2019.02.025
25-32
Optimization of geometric parameters of a semi-spheroidal solid oxide fuel cell anode using the 3D stress and strain distribution graphs
Ігор Кузьо, Bogdan Vasyliv, Віталій Корендій, Володимир Боровець
DOI: https://doi.org/10.23939/ujmems2019.02.033
33-42
Simulation of micro-cutting in the process of finishing anti-friction non-abrasive treatment
Ihor Shepelenko, Yuriy Tsekhanov, Yakiv Nemyrovskyi, Eduard Posvyatenko, Pavlo Eremin
DOI: https://doi.org/10.23939/ujmems2019.02.043
43-52
Solution of the equation of force of impact of solids expressed by the Ateb-sine
Vasyl Olshanskiy, Volodymyr Burlaka, Maksym Slipchenko
DOI: https://doi.org/10.23939/ujmems2019.02.053
53-60
Calculation of strength of heated curvilinear bar structural elements of tubular cross-sections
Микола Войтович, Lev Velychko, Роман Лампіка, Khrystyna Lishchynska
DOI: https://doi.org/10.23939/ujmems2019.02.061
61-67
Structural and kinematic analysis of pantograph-type manipulator with three degrees of freedom
Віталій Корендій, Р. В. Зінько, Yurii Cherevko
DOI: https://doi.org/10.23939/ujmems2019.02.068
68-82