EXAMINATION OF THE THERMAL EFFICIENCY OF THE SOLAR COLLECTOR INTEGRATED INTO THE LIGHT TRANSPARENT BUILDING FACADE

The work describes the prospects for the development of solar energy in Ukraine. Interest in the effective use of solar radiation by solar collectors justifies the relevance and expediency of research on the problem of using such energy in them. It is analyzed that solar energy remains a promising direction for generating thermal energy due to: the increased volume of solar radiation entering the territory of Ukraine and the wear or tear of technological equipment running on traditional organic fuel. Also, if taking into account the trend of building glass facades in the field of construction, in the work proposed solar collector which was integrated into the light transparent facade of the building. The solar collector model was developed for the purpose of in order to save space where solar collectors should be installed and to save fossil fuels. The temperature at the outlet of the solar collector reached 22.9 °C according to the intensity of the simulated solar radiation of 900 W/m2, which fell on the absorbing surface of the solar collector. Comparing the changes in the instantaneous power of the solar collector QSC, W/m2, it was found that at 60 minutes of the experiment was greater than 250 W/m2 under the intensity of the simulated solar radiation of 900 W/m2. The efficiency of the experimental solar collector reached ≈33% in the direct heat carrier mode in the system according to the intensity of the simulated solar radiation. It was established, that the proposed solar collector in the mode of direct heat carrier was the effective source of low potential heat supply under intensities which could correspond to the power of solar radiation at summer time of the year. The promising direction for further research will be the efficiency establishing of the collector under simulated intensities of the solar radiation and other modes of operation of the heat carrier.

Zolotko, K. (1998) Development of calculation methods and selection of rational parameters of heat supply systems with flat solar collectors. (Doctoral dissertation), 207. (in Russian)
Mysak, Y., Vozniak, О., Datsko, О., Shapoval, S. (2014) Solar energy: theory and practice. Lviv Politechnic National University, 340. (in Ukrainian)
Kutnyi, B., Osipa, M. (2014). Results of experimental studies of the solar collector. Collection of scientific papers, series: industrial engineering, construction of Poltava national technical University named after Yuri Kondratyuk, 1(40), 6. (in Ukrainian)
Salvi, Swapnil & Bhalla, Vishal & Taylor, Robert & Khullar, Vikrant & Otanicar, Todd & Phelan, Patrick & Tyagi, Himanshu. (2018). Technological Advances to Maximize Solar Collector Energy Output: A Review. Journal of Electronic Packaging, 140. (in English)
https://doi.org/10.1115/1.4041219
Vozniak, О., Shapoval, S., Pona, O., Venhryn, I. (2014) Influence of the direction and speed of the air flow on the operation of the solar collector without a transparent coating. Construction and technogenic safety, 50, 49-52. (in Ukrainian)
Pasichnyk, P., Pryimak, O. (2013) Analysis of the properties of textile materials for the absorbing element of the solar energy collector. Energy efficiency in construction and architecture, 4, 201-204. (in Ukrainian)
Syvoraksha, V., Zolotko, K., Markov, V., Petrov, B. (2001) Influence of the heat-sensing element design on the efficiency of the solar collector. Ecotechnologies and resource conservation, 2, 70-73. (in Russian)
Zhelykh, V., Piznak, B. (2013) Comparative analysis of calculated models of polymer solar collectors. Energy efficiency in construction and architecture, 4, 109-113. (in Ukrainian)
Shapoval, S., Zhelykh, V., Venhryn, I., & Kozak, K. (2020). Simulation of thermal processes in the solar collector which is combined with external fence of an energy efficient house. Proceedings of CEE 2019, Advances in Resource-saving Technologies and Materials in Civil and Environmental Engineering, 510-517. (in English)
https://doi.org/10.1007/978-3-030-27011-7_65
Filipowicz, M., Przenzak, E., Figaj, R. D. (2019). Building solar cooling systems based on thermally driven chillers as an alternative approach to classic electrical cooling systems. Construction of optimized energy potential, (1), 67-76. (in English)
Khotin, S. (2001) Development and research of a concentrating collector with vacuumed heat sinks. (Doctoral dissertation). (in Ukrainian)
Buonomano, A., Calise, F., Palombo, A. (2018). Solar heating and cooling systems by ab-sorption and adsorption chillers driven by stationary and concentrating photovolta-ic/thermal solar collectors: Modelling and simulation. Renewable and Sustainable Energy Reviews 82 (2), 1874-1908. (in English)
https://doi.org/10.1016/j.rser.2017.10.059
Lamnatou, C., Mondol, J., Chemisana, D., Maurer C. (2015). Modelling and simulation of Building-Integrated solar thermal systems: Behaviour of the system. Renewable and Sus-tainable Energy Reviews 45, 36-51. (in English)
https://doi.org/10.1016/j.rser.2015.01.024
Shapoval, S., Shapoval, P., Zhelykh, V., Pona, O., Spodyniuk, N., Gulai, B., Myroniuk, K. (2017). Ecological and energy aspects of using the combined solar collectors for low-energy houses. Chemistry and Chemical Technology, 11(4), 503-508. (in English)
https://doi.org/10.23939/chcht11.04.503
Venhryn, I. (2019) Research of solar collectors integrated into the construction of the glass facade of a building / construction: necessity and features. Theory and Building Practice, 38-46. (in Ukrainian)
https://doi.org/10.23939/jtbp2019.01.038