Depicted in the Article are two stages of technological construction processes for asphalt concrete courses, namely: loading and transportation of asphalt concrete mix. As regards the loading, presented in the Article are two versions of discharging directly into dump body of dump truck or into storage hopper. Mentioned are the advantages of storage hopper usage, as well as the variety of such facilities and the storage time for asphalt concrete mix inside them. Described is the preparation procedure for a dump body of dump truck prior to loading (cleaning, lubrication). Explained are both the proper and improper schemes of loading, as well as the visual signs of asphalt concrete quality after discharging. Described is the right way to protect the asphalt concrete mix against cooling in dump body of dump truck, as well as the proper distance and allowed time-interval for transportation, possible problems occurring during transportation, expediency of using re-loaders for discharging the mix into the receiving hopper of asphalt paver
Baran S. A. (2020). Improvements in the design of high-durability road surfaces made of crushed stone-mastic asphalt concrete: diss. ... candidate technical sciences. Kyiv, 2020. 220 p http://diser.ntu.edu.ua/Baran_dis.pdf
Gunka, V., Grynchuk, Yu., Prysiazhnyi, Yu., Sidun, Yu., Demchuk, Yu., & Volynets, M. (2023). Asphalt concrete mixes and asphalt concretes using oil residues and bitumen modified with maleic anhydride and polyethylene glycols. Bulletin of the National Technical University "KhPI". (4 (18)), 51-57. https://doi.org/10.20998/2079-0821.2023.02.04'
https://doi.org/10.20998/2079-0821.2023.02.04
Onyshchenko, A., Garkusha, M., Fedorenko, O., Plazii, Y. (2021). Study of the influence of the efficiency of application of asphalt concrete reinforced by basaltic fiber. Dorogi i mosti, 23, 117-128. 10.36100/dorogimosti2021.23.117.
https://doi.org/10.36100/dorogimosti2021.23.117
Zheltobriukh, A., Kopynets, I., Golovchenko, V., Sokolov, О. (2023). REVIEW OF METHODS FOR ASPHALT MIXTURES DESIGN. Dorogi i mosti, 27, 81-90. 10.36100/dorogimosti2023.27.081.
https://doi.org/10.36100/dorogimosti2023.27.081
Yunak, A., Kopynets, I., Sokolova, O. (2023). STONE MASTIC ASPHALT MIXTURES - COMPONENTS, COMPOSITION, DESIGN AND REQUIREMENTS. Dorogi i mosti, 28, 108-133. 10.36100/dorogimosti2023.28.108.
https://doi.org/10.36100/dorogimosti2023.28.108
Muhammad, M., Syuhada, A., Huzni, S., Fuadi, Z. (2019). Study on Heat loss through dump truck wall insulated by sengon wood. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 58(1), 126-134. https://akademiabaru.com/submit/index.php/arfmts/article/view/2572
Mahoney, J. P., Muench, S. T., Pierce, L. M., Read, S. A., Jakob, H., Moore, R. (2000). Construction-Related Temperature Differentials in Asphalt Concrete Pavement: Identification and Assessment. Transportation Research Record, 1712(1), 93-100. https://doi.org/10.3141/1712-12
https://doi.org/10.3141/1712-12
Kim, M., Phaltane, P., Mohammad, L.N. et al. Temperature segregation and its impact on the quality and performance of asphalt pavements. Front. Struct. Civ. Eng. 12, 536-547 (2018). https://doi.org/10.1007/s11709-017-0451-5
https://doi.org/10.1007/s11709-017-0451-5
Daniel, J., Yin, F., Martin, A., Arambula-Mercado, E., Newcomb, D., Planche, J., Ryan, M. (2018). Relationships of Laboratory Mixture Aging to Asphalt Mixture Performance. Transportation Research Circular, (E-C234). Washington, D.C: U.S. National Academy of Sciences Transportation Research Board https://onlinepubs.trb.org/onlinepubs/circulars/ec234.pdf#page=7
Dessouky, S., Reyes, C., Ilias, M., Contreras, D., Papagiannakis, A. T. (2011). Effect of pre-heating duration and temperature conditioning on the rheological properties of bitumen. Construction and Building Materials, 25(6), 2785-2792. https://doi.org/10.1016/j.conbuildmat.2010.12.058
https://doi.org/10.1016/j.conbuildmat.2010.12.058
Bocci, E., Prosperi, E., Mair, V., & Bocci, M. (2020). Ageing and cooling of hot-mix-asphalt during hauling and paving-A laboratory and site study. Sustainability, 12(20), 8612. https://doi.org/10.3390/su12208612
https://doi.org/10.3390/su12208612
Yildirim, Y., Solaimanian, M., & Kennedy, T. W. (2000). Mixing and compaction temperatures for hot mix asphalt concrete. University of Texas at Austin. Center for Transportation Research. https://www.academia.edu/112018190/Mixing_and_Compaction_Temperatures_fo...
Syuhada, A., Huzni, S., & Fuadi, Z. (2019). Study of temperature loss of Hot Mix Asphalt during transportation. In IOP Conference Series: Materials Science and Engineering, 523(1). DOI 10.1088/1757-899X/523/1/012083
https://doi.org/10.1088/1757-899X/523/1/012083
Solodkyy, S., & Sidun I. (2021). Innovative materials and technologies in road construction. Part 1. Materials and technologies based on organic binders: teaching. manual. Lviv, Publishing House of Lviv Polytechnic.. https://vlp.com.ua/node/20457
Minakov, O.(2014). Calculation of the temperature distribution of the asphalt concrete mixture in the body of the truck by depth. ROADS AND BRIDGES, 14, 96-100. http://dorogimosti.org.ua/files/upload/t2_15.pdf
Onyshchenko A., Fedorenko O., Yanchuk L. (2021). Ensuring the durability of the asphalt concrete coating on the rigid basis of highways. Bulletin of the National Transport University, 48, 242-256. DOI: 10.33744/2308-6645-2021-1-48-242-256
https://doi.org/10.33744/2308-6645-2021-1-48-242-256
Zolotaryov, V., Ageeva, O., Pyrig, Y., Yefremov, S. (2002). The influence of Wetfix BE adhesive additive on the properties of bitumen and asphalt concrete. Highway of Ukraine, (1), 29-31.
Kishchynsky, S., Kopynets, I., Sokolov, O. (2017) The use of energy-saving additives to reduce the technological temperatures of preparing asphalt concrete mixtures. Automobile roads and road construction, 99, 49-57. http://publications.ntu.edu.ua/avtodorogi_i_stroitelstvo/99/049-057.pdf
Tetera, V. (2023). USE OF ENERGY SAVING TECHNOLOGIES FOR THE PREPARATION OF ASPHALT CONCRETE MIXTURES. Section "Construction and operation of highways" Collection, 77, 77-81. https://rcf.khadi.kharkov.ua/fileadmin/F-HIGHWAY/%D0%91%D1%83%D0%B4%D1%9...
Pyrig, Y., Galkin, A. (2022). Peculiarities of the influence of adhesive additives on bitumens of different structural and rheological types. Modern technologies and calculation methods in construction, (18), 89-97. https://doi.org/10.36910/6775-2410-6208-2022-8(18)-11
https://doi.org/10.36910/6775-2410-6208-2022-8(18)-11
Mudrychenko, A., Illiash, S., Savenko, V. (2022). Analysis of physico-mechanical characteristics of warm asphalt concrete mixtures based on bitumen with the addition of energy-saving additives and foamed bitumen.. Dorogi і mosti [Roads and bridges], 25, 87-98. https://doi.org/10.36100/dorogimosti2022.25.087
https://doi.org/10.36100/dorogimosti2022.25.087
Illyasch, S., Goncharenko, V., & Zelenovskii, V. (2020). Reloading of asphalt mixtures as a way to eliminate their temperature and fractional segregation. ROADS AND BRIDGES, 21, 177-187. https://doi.org/10.36100/dorogimosti2020.21.177
https://doi.org/10.36100/dorogimosti2020.21.177