RESIDUAL BINDER OF ROAD BITUMINOUS EMULSIONS INVESTIGATED USING THE SUPERPAVE SYSTEM. REVIEW

The article reviews the features of the study of residual binder obtained from bituminous emulsions using the SUPERPAVE system. The need to add improving additives to bituminous emulsions, namely modifiers (polymeric and adhesive additives) and special additives of different effects (solvents, stabilizers, thickeners, defoamers) is characterized. It is determined that the effect of special additives with different effects on the properties of the residual binder of the emulsion is not fully investigated. It is shown that the method of obtaining residual binder from bitumen emulsions in the laboratory is especially important. Today, all methods of obtaining residual binder from an emulsion can be divided into high-temperature distillation methods and low-temperature evaporation. The literature review confirmed that the high-temperature and low-temperature performance characteristics of the residual binder of emulsions primarily depend on the amount and type of modifier and emulsifier used.

Zeiada, Waleed & Liu, Hanqi & Ezzat, Helal & Underwood, Shane & Al-Khateeb, Ghazi & Shanableh, Am & Samarai, Mufid. (2022). Review of the Superpave performance grading system and recent developments in the performance-based test methods for asphalt binder characterization. Construction and Building Materials. 319. 126063. 10.1016/j.conbuildmat.2021.126063.
https://doi.org/10.1016/j.conbuildmat.2021.126063
Watson, Donald. (2003). Updated Review of Stone Matrix Asphalt and Superpave® Projects. Transportation Research Record. 1832. 217-223. 10.3141/1832-26..
https://doi.org/10.3141/1832-26
Gou, Guotao & Gou, Mingjie & Jing, Hongwei. (2024). Experimental Study on the Influence of the Superpave and Marshall Design Methods on the Pavement Performance of Asphalt Mixtures. Journal of Engineering Science and Technology Review. 17. 58-64. 10.25103/jestr.174.08.
https://doi.org/10.25103/jestr.174.08
Sidun I., Vollis O., Solodkyy S., Gunka V. (2019). Cohesion of Slurry Surfacing Mix with Slow Setting Bitumen Emulsions. In: Blikharskyy Z., Koszelnik P., Mesaros P. (eds) Proceedings of CEE 2019. CEE 2019. Lecture Notes in Civil Engineering, vol 47. Springer, Cham 10.1007/978-3-030-27011-7_53
https://doi.org/10.1007/978-3-030-27011-7_53
Sidun, I., Vollis, O., Bidos, V., Turba, Y. (2023). Versions of Orthophosphoric Acids for Slurry Surfacing Mix. In: Blikharskyy, Z. (eds) Proceedings of EcoComfort 2022. EcoComfort 2022. Lecture Notes in Civil Engineering, vol 290. Springer, Cham. https://doi.org/10.1007/978-3-031-14141-6_40.
https://doi.org/10.1007/978-3-031-14141-6_40
Bidos, Volodymyr & Sidun, Iurii & Sobol, Khrystyna & Balabukh, Yaroslav & Rybchynskyi, Sergii. (2024). Breaking behavior of cationic bitumen emulsions. IOP Conference Series: Earth and Environmental Science. 1376. 012010. 10.1088/1755-1315/1376/1/012010.
https://doi.org/10.1088/1755-1315/1376/1/012010
Pstrowska K., Gunka V., Sidun I., Demchuk Y., Vytrykush N., Kułażyński M., Bratychak M. Adhesion in bitumen/aggregate system: adhesion mechanism and test methods // Coatings. - 2022. - Vol. 12, iss. 12. - P. 1934-1-1934-19. https://doi.org/10.3390/coatings12121934
https://doi.org/10.3390/coatings12121934
Pyrig, Yan & Galkin, Andrey & Zolotarev, Victor. (2021). Improvement of the method of evaluation of bi-tumen binder adhesion. Bulletin of Kharkov National Automobile and Highway University. 2. 57-67. 10.30977/BUL.2219-5548.2021.92.2.57.
https://doi.org/10.30977/BUL.2219-5548.2021.92.2.57
Gunka, Volodymyr & Demchuk, Yuriy & Sidun, Iurii & Miroshnichenko, Denis & Nyakuma, Bemgba & Pyshyev, Serhiy. (2020). Application of phenol-cresol-formaldehyde resin as an adhesion promoter for bitumen and asphalt concrete. Road Materials and Pavement Design. 10.1080/14680629.2020.1808518.
https://doi.org/10.1080/14680629.2020.1808518
Gunka, Volodymyr & Astakhova, Olena & Hrynchuk, Yurii & Sidun, Iurii & Reutskyy, Volodymyr & Mirchuk, Iryna & Poliak, Olha. (2024). A Review of Road Bitumen Modification Methods. Part 1 - Physical Modification. Chemistry & Chemical Technology. 18. 295-304. 10.23939/chcht18.02.295.
https://doi.org/10.23939/chcht18.02.295
Salomon, D. (2006) Asphalt emulsion technology, in: Transportation Research Board, Characteristics of Bituminous Materials Committee, Transportation Research Circular E-C102, Washington, DC.
King, G. & Lesueur, Didier & King, Helen & Planche, Jean-Pascal. (1993). SHRP test evaluation of High Float and Polymer Modified Bitumen emulsion residues. Conference: 1st World Congress on Emulsion, Paris, France.
King, G., Lesueur, D., King, H., and Planche, J. P., (1996). "SHRP test evaluation of high float and polymer modified bitumen emulsion residues." Proc., Eurobitume/Eurasphalt Congress, Strasbourg.
Takamura, K., "Comparison of Emulsion Residues Recovered by Forced Airflow and RTFO Drying," ISSA/AEMA Proceedings, March 12-15, 2000, pp. 1-17.
Takamura, K. Forced Air Drying and Superpave Analysis of Emulsion Residue. Proc., ISSA 39th Annual Meeting, Maui, Hawaii, March 2001
Hanz, Andrew & Arega, Zelalem & Bahia, Hussain. (2010). Rheological Behavior of Emulsion Residues Produced by Evaporative Recovery Method. Transportation Research Record: Journal of the Transportation Research Board. 2179. 102-108. 10.3141/2179-12.
https://doi.org/10.3141/2179-12
Islam, Mohammad & Salehi Ashani, Saeid & Wasiuddin, Nazimuddin & King, William. (2015). Effects of Curing Time, Temperature, and Vacuum Pressure on Asphalt Emulsion Residue Recovered by Vacuum Drying Method. Journal of Testing and Evaluation. 43. 20140014. 10.1520/JTE20140014.
https://doi.org/10.1520/JTE20140014
Malladi, Haritha & Asnake, Meron & LaCroix, Andrew & Castorena, Cassie. (2018). Low-Temperature Vacuum Drying Procedure for Rapid Asphalt Emulsion Residue Recovery. Transportation Research Record: Journal of the Transportation Research Board. 2672. 036119811879191. 10.1177/0361198118791913.
https://doi.org/10.1177/0361198118791913
Sun, Yang & Yue, Jin-Chao & Wang, Riran & Li, Rui-Xia & Wang, De-Cai. (2020). Investigation of the Effects of Evaporation Methods on the High-Temperature Rheological and Fatigue Performances of Emulsified Asphalt Residues. Advances in Materials Science and Engineering. 2020. 1-12. 10.1155/2020/4672413.
https://doi.org/10.1155/2020/4672413
Ge, Dongdong & Zhou, Xiaodong & Chen, Siyu & Jin, Dongzhao & You, Zhanping. (2020). Laboratory Evaluation of the Residue of Rubber-Modified Emulsified Asphalt. Sustainability. 12. 10.3390/su12208383.
https://doi.org/10.3390/su12208383
Clyne, T. R., Marasteanu, M. O., & Basu, A. (2003). Evaluation of asphalt binders used for emulsions (No. MN/RC-2003-24).
Basu, A., Marasteanu, M. O., & Hesp, S. A. M. (2003). Time-Temperature Superposition and Physical Hardening Effects in Low-Temperature Asphalt Binder Grading. Transportation Research Record, 1829(1), 1-7. https://doi.org/10.3141/1829-01.
https://doi.org/10.3141/1829-01
Cho, Seong & Im, Jeong. (2015). Mathematical Approach in Rheological Characterizing of Asphalt Emulsion Residues. Mathematical Problems in Engineering. 2015. 1-13. 10.1155/2015/797808.
https://doi.org/10.1155/2015/797808
Marasteanu, Mihai & Clyne, Timothy. (2006). Rheological Characterization of Asphalt Emulsions Residues. Journal of Materials in Civil Engineering - J MATER CIVIL ENG. 18. 10.1061/(ASCE)0899-1561(2006)18:3(398).
https://doi.org/10.1061/(ASCE)0899-1561(2006)18:3(398)
Wasiuddin, Nazimuddin & Islam, Mohammad. (2022). Establishing Correlations Between Force Ductility and DSR Parameters of Asphalt Emulsion Residues. 10.1007/978-3-030-46455-4_91.
https://doi.org/10.1007/978-3-030-46455-4_91
Mitchell, M. & Link, R. & Prapaitrakul, Nikornpon & Han, Rongbin & Jin, Xin & Epps Martin, Amy & Glover, Charles. (2010). Comparative Study on Recovered Binder Properties Using Three Asphalt Emulsion Recovery Methods. Journal of Testing and Evaluation - J TEST EVAL. 38. 10.1520/JTE102739.
https://doi.org/10.1520/JTE102739
You, Lingyun & Dai, Qingli & You, Zhanping & Zhou, Xiaodong & Washko, Sarah. (2020). Stability and rheology of asphalt-emulsion under varying acidic and alkaline levels. Journal of Cleaner Production. 120417. 10.1016/j.jclepro.2020.120417.
https://doi.org/10.1016/j.jclepro.2020.120417
Hanz, Andrew & Johannes, Petrina & Bahia, Hussain. (2012). Development of Emulsion Residue Testing Framework for Improved Chip Seal Performance. Transportation Research Record: Journal of the Transportation Research Board. 2293. 106-113. 10.3141/2293-13.
https://doi.org/10.3141/2293-13
Rahman, Md Nafiur & Sarkar, Md Tanvir & Elseifi, Mostafa. (2019). Rheological and Molecular Characterization of Rubberized Asphalt Emulsion. MATEC Web of Conferences. 271. 03001. 10.1051/matecconf/201927103001.
https://doi.org/10.1051/matecconf/201927103001