The article examines the effect of Ukrainian-produced petroleum road bitumen BND 70/100 from Kremenchuk Oil Refinery modified separately with polymers, synthetic waxes, and adhesion additives on dense asphalt concrete type A, grade 1. Nine additives were studied: polymers (Calprene 501, PDL S501T SBS, Elvaloy 741, Kraton D1101 ASM), waxes (Asphalten A, Asphalten B, Sasobit) and adhesion agents (AdHebit LA-1245, Wetfix BE). Tests determined water saturation, density, compressive strength, deformation (0, 20, 50 °C), and Marshall properties at 60 °C. Polymer modifiers significantly improved strength, stiffness, temperature stability, and crack resistance. Waxes reduced water saturation and enhanced compaction but could lower low-temperature strength. Adhesion additives improved water resistance without notably increasing mechanical performance
Arsenieva, N. (2018). Analysis of strength characteristics and properties of asphalt concrete pavement layers under various temperature conditions. Scientific Notes of V.I. Vernadsky Taurida National University. Series: Technical Sciences, 29(68), 3, 68-72. https://www.tech.vernadskyjournals.in.ua/journals/2018/5_2018/part_3/15.pdf.
Tkach, S.V. & Kroviakov, Sergii. (2025). The effect of different types of modifiers on the properties of bitumens and asphalt concrete based on them. Modern construction and architecture. 102-113. https://doi.org/10.31650/2786-6696-2025-12-102-113.
https://doi.org/10.31650/2786-6696-2025-12-102-113
Jatoi, G., Loprencipe, G. & Moretti, L. (2025). Comparative Review of Marshall and Superpave mix designs: Enhancing asphalt performance with polymers. Materials. 18(18), 4273. https://doi.org/10.3390/ma18184273.
https://doi.org/10.3390/ma18184273
Chuguyenko, S. (2006). Shear resistance of asphalt concretes on polymer-modified bitumens [Doctoral dissertation abstract, Ukrainian State Academy of Railway Transport].http://lib.kart.edu.ua/bitstream/123456789/6312/1/aref_Chuguenko.pdf.
Solodkyi, S., & Sidun, Yu. (2021). Innovative materials and technologies in road construction. Part 1: Materials and technologies based on organic binders [Textbook]. Lviv Polytechnic Publishin.
Demchuk, Yu. (2020). Bitumens modified with resins obtained from the phenolic fraction of coal tar [PhD dissertation, Lviv Polytechnic National University]. https://lpnu.ua/sites/default/files/2020/radaphd/5664/disertaciya-demchu...
Obolonkov, D., & Sadovnychyi, S. (2020). Use of asphalt concretes based on polymer-modified bitumens in routine repair of local roads. Collection of Scientific Works of DonNABA, 22-25. https://donnaba.edu.ua/journal/wp-content/uploads/2021/01/22-25.pdf.
Azam, Abdelhalim & El-Badawy, Sherif & Alabasey, R.. (2019). Evaluation of asphalt mixtures modified with polymer and wax. Innovative Infrastructure Solutions. 4. 10.1007/s41062-019-0230-3.
https://doi.org/10.1007/s41062-019-0230-3
Nasr, Danial & Pakshir, Amir. (2017). Rheology and storage stability of modified binders with waste polymers composites. Road Materials and Pavement Design. 20. 1-20. 10.1080/14680629.2017.1417152.
https://doi.org/10.1080/14680629.2017.1417152
Nivitha, M. & Rajeev, Devika & Krishnan, Murali & Roy, Neethu. (2022). Influence of bitumen type and polymer dosage on the relaxation spectrum of styrene-butadiene-styrene (SBS)/styrene-butadiene (SB) modified bitumen. Mechanics of Time-Dependent Materials. 27. 10.1007/s11043-021-09531-y.
https://doi.org/10.1007/s11043-021-09531-y
Gunka, Volodymyr & Astakhova, Olena & Hrynchuk, Yurii & Sidun, Iurii & Reutskyy, Volodymyr & Mirchuk, Iryna & Poliak, Olha. (2024). A Review of Road Bitumen Modification Methods. Part 1 - Physical Modification. Chemistry & Chemical Technology. 18. 295-304. 10.23939/chcht18.02.295.
https://doi.org/10.23939/chcht18.02.295
Kohut, Ananiy & Poliak, Olha & Sidun, Iurii & Astakhova, Olena & Onyshchenko, Artur & Besaha, Khrystyna & Gunka, Volodymyr. (2025). A Review of Road Bitumen Modification Methods. Part 2 - Chemical Modification. Chemistry & Chemical Technology. 19. 141-156. 10.23939/chcht19.01.141.
https://doi.org/10.23939/chcht19.01.141
Pyshyev, Serhiy & Demchuk, Yuriy & Gunka, Volodymyr & Donchenko, Myroslava & Korchak, Bohdan & Sidun, Iurii & Poliuzhyn, Ihor & Drapak, Iryna. (2023). Study of road bitumens operational properties modified with phenol-cresol-formaldehyde resin. 10.21203/rs.3.rs-2934525/v1.
https://doi.org/10.21203/rs.3.rs-2934525/v1
Demchuk, Y., Gunka, V., Sidun, I., Korchak, B., Donchenko, M., Drapak, I., Poliuzhyn, I., & Pyshyev, S. (2025). Study of Road Bitumen Operational Properties Modified with Phenol-Cresol-Formaldehyde Resin. Resources, 14(6), 91. https://doi.org/10.3390/resources14060091.
https://doi.org/10.3390/resources14060091
Pyshyev, Serhiy & Demchuk, Yuriy & Poliuzhyn, Ihor & Kochubei, Viktoria. (2022). Obtaining and use adhesive promoters to bitumen from the phenolic fraction of coal tar. International Journal of Adhesion and Adhesives. 118. 103191. 10.1016/j.ijadhadh.2022.103191.
https://doi.org/10.1016/j.ijadhadh.2022.103191
Pyshyev, Serhiy & Prysiazhnyi, Yu.V. & Isaiah Borbeyiyong, Guri & Vytrykush, Nataliya. (2023). Bitumen Modified with Resins Obtained from Coal Coking Liquid Products: Nature, Adhesive and Rheological Properties. 10.21203/rs.3.rs-2644826/v1.
https://doi.org/10.21203/rs.3.rs-2644826/v1
Gunka, Volodymyr & Demchuk, Yuriy & Sidun, Iurii & Miroshnichenko, Denis & Nyakuma, Bemgba & Pyshyev, Serhiy. (2020). Application of phenol-cresol-formaldehyde resin as an adhesion promoter for bitumen and asphalt concrete. Road Materials and Pavement Design. 22. 10.1080/14680629.2020.1808518.
https://doi.org/10.1080/14680629.2020.1808518
Zhang, Zengping & Liu, Hao & Ban, Xiaoyi & Liu, Xiaosong & Guo, Yinxiao & Sun, Jia & Liu, Yanqi & Zhang, Suyu & Lei, Jiahao. (2023). Thermosetting resin modified asphalt: A comprehensive review. Journal of Traffic and Transportation Engineering (English Edition). 10. 1001-1036. 10.1016/j.jtte.2023.11.002.
https://doi.org/10.1016/j.jtte.2023.11.002
Gunka, V., Poliak, O., Sidun, I., Demchuk, Y., Blikharskyy, Y., Kohut, A., Dzianyi, N., & Onyshchenko, A. (2025). Testing of Cationic Adhesion Promoters Derived from Rapeseed Oil in Bitumen and Asphalt Mixtures. Infrastructures, 10(11), 309. https://doi.org/10.3390/infrastructures10110309.
https://doi.org/10.3390/infrastructures10110309
Pyrig, Yan & Kishchynskyi, Serhii & Galkin, Andrey & Oksak, Serhii & Poliak, Olha & Sidun, Iurii & Gunka, Volodymyr. (2025). Study of the impact of adhesion promoters on the properties of road bitumens. Budownictwo i Architektura. 24. 25007. 10.35784/bud-arch.8084.
https://doi.org/10.35784/bud-arch.8084
Eskandarsefat, S., Venturini, L., Ciarlitti, A., Sogno, E., & Ottonelli, I. (2022). Asphalt Concrete Modification with Plastomers: A Case Study Conducted 7 Years after Construction. Infrastructures, 7(3), 29. https://doi.org/10.3390/infrastructures7030029.
https://doi.org/10.3390/infrastructures7030029
Tkach, S., & Kroviakov, S. (2025). Domestic bitumen modified with different classes of additives. Modern Technologies and Methods of Calculations in Construction, (24), 525-538. https://doi.org/10.36910/6775-2410-6208-2025-14(24)-45.
https://doi.org/10.36910/6775-2410-6208-2025-14(24)-45