foaming agent

DISPOSAL OF USED FORMING MIXTURES FROM FOUNDRIES OF MACHINE- BUILDING PLANTS IN THE PRODUCTION OF PERFORATED MATERIAL

The waste of foundries of machine-building plants - spent moulding mixtures was studied. The expediency of using spent mixtures of foundry production as a siliceous component of foam concrete mixtures has been proven. The spent mixtures were studied for their foaming ability. The foam properties are determined. The effect of concrete mixture components on the pore-forming ability of foam agents was investigated. Of the six foaming agents studied in the work, saponified tree resin was found to be the most effective.

RESEARCH OF FOAM FORMERS AND CONCRETE ON THEIR BASIS FOR PRODUCTION OF PRODUCTS OF NON-AUTOCLAVE HARDENING AND MONOLITHIC CONCRETE

Production of foam concrete products and monolithic concreting from them requires foaming agents that have the properties of the obtained foam with a sufficient value of its criteria (multiplicity of foaming, stability of foam for a certain period of time); its compatibility with Portland cement and its hydration products; with hydrated lime, etc. Insufficient properties of the foam can be compensated by the introduction of corrective and stabilizing additives.

INVESTIGATION OF SURFACES FOR THE PRODUCTION OF NON-CONTAINERS OF ABSOLUTELY SILVER

The full market of Ukraine by various foaming agents of domestic and foreign production requires the study of their technical properties and properties of foam on their basis. The article presents the results of research on the multiplicity of foam formation and foam stability during a certain period of time. The comparative characteristic of such properties of foaming agents allows them to be used successfully in the production of foam concrete.