PRODUCTION OF PETROLEUM BITUMEN BY OXIDATION OF TAR FROM A MIXTURE OF EASTERN UKRAINIAN OILS

2023;
: 49-54
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University
3
Lviv Polytechnic National University
4
4Wroclaw University of Science and Technology, Poland

The study results of the process obtaining of petroleum bitumen with improved quality indicators are described. The method of mixing the tar of paraffinic oils with the residue and the distillation of Orkhiv oil with subsequent oxidation of this mixture was used. To conduct the research, tar extracted from Western Ukrainian paraffinic oils was used. The influence of temperature, oxidation duration and air consumption on the operational properties of oxidized petroleum bitumens were determined. Samples of the obtained oxidized petroleum bitumen were analyzed with the determination of ductility (at 25 0C), penetration (at 25 0C) and softening point (ring-and-ball method). We established that the bitumen with improved operational properties obtained from the residue of paraffinic oils with the addition of residue from the distillation of Orkhiv oil to the raw materials can be used for laying asphalt pavement.

1. Al-Ameri M. S.; Grynyshyn O. B; Khlibyshyn Yu. Ya. (2013). Modification of Residual Bitumen from Orhovytska Oil by Butonal Polymeric Latexes. Chemistry & Chemical Technology 7(3). 323-326. https://doi.org/10.23939/chcht07.03.323
https://doi.org/10.23939/chcht07.03.323
2. Movilla Q. D., Vega-Zamanillo A., Calzada-Pérez M.,  Castro-Fresno D. (2013) Experimental study of bituminous mastic behaviour using different fillers based on the UCL method. Journal of Civil Engineering and Management. 19. 149-157. https://doi.org/10.3846/13923730.2012.734848
https://doi.org/10.3846/13923730.2012.734848
3. Grynyshyn O. B.; Khlibyshyn Yu. Ya.,  Nagurskyy A. O., Nagurskyy O. A. (2015). Methods of Obtaining Bitumen from Heavy Oil Processing Residues. Techn. Audit i Rezervy Proizvod.  5(4). 45-48. https://doi.org/10.15587/2312-8372.2015.51054
https://doi.org/10.15587/2312-8372.2015.51054
4. Hryhorov A.B., Mardupenko O.O., Sinkevych I.V. Tekhnolohiya polimervmisnykh bitumnykh materialiv https://repository.kpi.kharkov.ua/handle/KhPI-Press/56749
5. Remišová E., Liu G., Komačka J.,Wu S., XiaoY., Holý, M. (2019). Rheological Properties of Bitumens from the Perspective their Chemical Composition. Civil and Environmental Engineering, 15(2) 174-182. https://doi.org/10.2478/cee-2019-0021
https://doi.org/10.2478/cee-2019-0021
6. Nagurskyy A. O., Khlibyshyn Yu. Ya. , Grynyshyn O. B., Kochubei V. V. (2020) Rubber crumb modified bitumen produced from crude oil residuals of Ukrainian deposits. Chemistry & Chemical Technology. 14 (3). 420-425. https://doi.org/10.23939/chcht14.03.420
https://doi.org/10.23939/chcht14.03.420
7. Khlibyshyn Yu. Ya, Pochapska I. Ya., Grynyshyn O.B., Gnativ Z. Ya. (2018) The study of the fabrication of bitumen from acid tars and oil residues. Питання хімії та хімічної технології. 5 (120). 161-167.
8. Khlibyshyn YU. YA., Fryder I. V., Hrynyshyn O. B. , Pochapsʹka I. YA. (2016) Novyy metod vidobrazhennya vlastyvostey naftovykh bitumiv zalezhno vid yikh hrupovoho skladu/ Naftohazova haluzʹ Ukrayiny. 6. 30-32.
9. Topilʹnytsʹkyy P. I., Romanchuk V. V., Yarmola T. V., Zinchenko D. V. (2020) Fizyko-khimichni vlastyvosti vazhkykh naft Yablunivsʹkoho rodovyshcha z vysokym vmistom sirky/ Chemistry, Technology and Application of Substances. 3 (1). 75-82.
https://doi.org/10.23939/ctas2020.01.075
10. DSTU 8825:2019 Bitum ta bitumni vʺyazhuchi. Metod vyznachennya roztyazhnosti.
11. DSTU EN 1426:2018 Bitum ta bitumni v'yazhuchi. Vyznachennya hlybyny pronyknosti holky (penetratsiyi) (EN 1426:2015, IDT).
12. DSTU EN 1427:2018 Bitum ta bitumni vʺyazhuchi. Vyznachennya temperatury rozmʺyakshenosti za metodom kilʹtsya i kuli (EN 1427:2015, IDT).
13. DSTU 9169:2021 Bitum ta bitumni vʺyazhuchi. Vyznachennya zcheplyuvanosti z mineralʹnym materialom.
14. DSTU 8859:2019 Bitum ta bitumni vʺyazhuchi. Metod vyznachennya ekvipenetratsiynoyi temperatury ta indeksu penetratsyi.
15. DSTU EN 12593:2018 Bitum ta bitumni vʺyazhuchi. Vyznachennya temperatury krykhkosti za metodom Fraasa (EN 12593:2015, IDT).