The article is dedicated to the problem of decarbonising industrial gas emissions using adsorption methods. The article examines promising approaches to reducing carbon dioxide (CO₂) emissions using adsorption materials with high selectivity and efficiency in capture processes. The purpose of the study is to determine the adsorption capacity of various types of adsorbents, including synthetic and natural materials, in particular, fly ash synthesised by the hydrothermal method, zeolite obtained by the sintering method, natural zeolite, and fly ash from thermal power plants. The research showed that the most effective adsorbent for absorbing CO₂ is zeolite synthesised by hydrothermal, demonstrating a high adsorption capacity among the studied materials. Natural zeolite and thermal power plant fly ash have a much lower adsorption capacity, but they can be used as cost-effective alternatives for processes with moderate performance requirements. The study also highlights the importance of selecting adsorbents depending on operating conditions, such as temperature and pressure, which affect adsorption. According to the research results, synthetic zeolites have a significant advantage in adsorption efficiency due to their high specific surface area and porous structure, which allow effective absorption of CO₂ even at relatively low gas concentrations. The generalised conclusions of the article indicate that the use of adsorption methods for decarbonising industrial emissions can significantly reduce the level of greenhouse gases in the atmosphere. This research has the potential to significantly impact the field of environmental science and engineering, providing valuable insights for future studies and practical applications.
1. Abd, A. A., Naji, S. Z., Hashim, A. S., & Othman, M. R. (2020). Carbon dioxide removal through physical adsorption using carbonaceous and non-carbonaceous adsorbents: a review. Journal of Environmental Chemical Engineering, 8(5), 104142. doi: https://doi.org/10.1016/j.jece.2020.104142
https://doi.org/10.1016/j.jece.2020.104142
2. Arista, P. (2023). Peranan Microorganisms Pendegradasi Plastik: Tinjauan Biodegradation Plastik, Mekanismenya, serta Microorganism yang Berperan. Journal Pro-Life, 10(1), 743-755. doi: https://doi.org/10.33541/jpvol6Iss2pp102
https://doi.org/10.33541/jpvol6Iss2pp102
3. Cinke, M., Li, J., Bauschlicher Jr., C. W., Ricca, A., & Meyyappan, M. (2003). CO2 adsorption in single-walled carbon nanotubes. Chemical Physics Letters, 376(5-6), 761-766. doi: https://doi.org/10.1016/S0009-2614(03)01124-2
https://doi.org/10.1016/S0009-2614(03)01124-2
4. Gautam, A., & Mondal, M. K. (2023). Review of recent trends and various techniques for CO2 capture: Special emphasis on biphasic amine solvents. Fuel, 334, 126616. doi: https://doi.org/10.1016/j.jclepro.2023.136568
https://doi.org/10.1016/j.jclepro.2023.136568
5. Hayawin, Z. N., Syirat, Z. B., Ibrahim, M. F., Faizah, J. N., Astimar, A. A., Noorshamsiana, A. W., & Abd-Aziz, S. (2023). Pollutant removal from palm oil mill effluent (POME) final discharge using oil palm kernel shell activated carbon in the up-flow continuous adsorption system. International Journal of Environmental Science and Technology, 20(4), 4325-4338. doi: https://doi.org/10.1007/s13762-022-04268-8
https://doi.org/10.1007/s13762-022-04268-8
6. Li, J. Y., Lin, Y. T., Wang, D. K., Tseng, H. H., & Wey, M. Y. (2023). Planetary cross-linked structure design of hybrid organosilica membrane by amine-driven polymerisation for CO2 separation. Journal of Cleaner Production, 398, 136568. doi: https://doi.org/10.1016/j.jclepro.2023.136568
https://doi.org/10.1016/j.jclepro.2023.136568
7. Park, D., Hong, S. H., Kim, K. M., & Lee, C. H. (2020). Adsorption equilibria and kinetics of silica gel for N2O, O2, N2, and CO2. Separation and Purification Technology, 251, 117326. doi: https://doi.org/10.1016/j.seppur.2020.117326
https://doi.org/10.1016/j.seppur.2020.117326
8. Peng, X., Vicent-Luna, J. M., & Jin, Q. (2021). Water–gas shift reaction to capture carbon dioxide and separate hydrogen on single-walled carbon nanotubes. ACS Applied Materials & Interfaces, 13(9), 11026-11038. doi: https://doi.org/10.1021/acsami.1c00145
https://doi.org/10.1021/acsami.1c00145
9. Quan, C., Zhou, Y., Wang, J., Wu, C., & Gao, N. (2023). Biomass-based carbon materials for CO2 capture: A review. Journal of CO2 Utilization, 68, 102373. doi: https://doi.org/10.1016/j.jcou.2022.102373
https://doi.org/10.1016/j.jcou.2022.102373
10. Sabadash, V., Gumnitsky, J., Lopushansky, O., Matsuska, O., & Nowik-Zając, A. (2023). Dynamics of carbon dioxide adsorption by carbon nanotubes. Journal Environmental Problems, 8(2), 101–107. doi: https://doi.org/10.23939/ep2023.02.101
https://doi.org/10.23939/ep2023.02.101
11. Wang, F., Gu, Y., Zha, J., & Wei, S. (2023). Synthesis of Graphene Quantum Dots Enhanced Nano Ca(OH)2 from Ammoniated CaCl2. Materials, 16(4), 1568. doi: https://doi.org/10.3390/ma16041568
https://doi.org/10.3390/ma16041568
12. Wang, L., Rinklebe , J., Tack, F. M., & Hou, D. (2021). A review of green remediation strategies for heavy metal contaminated soil. Soil Use and Management, 37(4), 936-963. doi: https://doi.org/10.1111/sum.12717
https://doi.org/10.1111/sum.12717
13. Wijaya, D. T., & Lee, C. W. (2022). Metal-organic framework catalysts: A versatile platform for bioinspired electrochemical conversion of carbon dioxide. Chemical Engineering Journal, 446, 137311. doi: https://doi.org/10.1016/j.cej.2022.137311
https://doi.org/10.1016/j.cej.2022.137311
14. Yuan, J., Liu, X., Wang, H., & Li, X. (2023). Evaluation and screening of porous materials containing fluorine for carbon dioxide capture and separation. Computational Materials Science, 216, 111872. doi: https://doi.org/10.1016/j.commatsci.2022.111872