Control of the position of the support rollers of a rotary kiln by electronic total stations

Lviv Polytechnic National University
Lviv Polytechnic National University
Lviv Polytechnic National University
Lviv Polytechnic National University

The development of modern technique has led to the improved methods for the determination of geometric parameters of the big-sized rotary kilns. There is method the measuring of the rotary kilns rollers by total station. It is shown, that use total station allow provide effective operation of this equipment.          

  1. Astashenkov G.G.  Geodetic work in the operation of large-scale industrial equipment.  - Moscow: Nedra, 1986. - 151 p.  
  2. Kuzio IV .. Shevchenko TG  Calculation and control of the installation of aggregates of continuous production - Lviv: Vishchalik.  Izd-in the case of Lviv.  Un-te, 1987. - 176 p.  
  3. Rubinov A.D.  Large size control in engineering.  Directory.  - L .: Mechanical Engineering, 1982. - 215 p.  
  4. Guidelines for reconciling the technological equipment of the metallurgical industry.  - Moscow: Ministry of Metallurgy of the USSR, 1991. - 214 p.  
  5. Guidance on geodetic support for the installation and operation of technological equipment of the cement industry / GUSK USSR.  - Moscow: Nedra, 1983. - 112 p.
  6. System of maintenance and repair of technological equipment of enterprises of the building materials industry.  Cement industry.  4.1.  - М .: МПСМ, Оргпроектцемент, 1987. - Вып.  1. - 249 seconds.
  7. Shevchenko T. G. Evolution of geodetic control of installation of large-sized equipment // Geodesy, cartography and aerial photography.  - 2003. - No. 64. - p.  104-106.  
  8. T.G. Shevchenko, O.I.Moroz, S.G.  Chopot  Methodology of engineering and geodetic works in determining the position of rollers of rotary kilns // Herald of Geodesy of Cartography.  - 1996. - No. 2 (6).  - with.  45-52.  
  9. Shevchenko TG, Moroz O.I., Zazulyak P.M., Kubrak O.D.  Control of the position of the roller rollers of the rotary kiln with electronic tacheometers // Newest achievements in geodesy, geoinformatics and land management.  36. Sciences, works.  Chernigov  - 2006. - №2.  - with.  75-80.  
  10. Shevchenko T.G., Moroz O.I., Skryl V.A., Kubrak O.D.  The use of electronic tacheometers to determine the position of the roller rollers of the rotary kiln / / Bulletin of the theses of the XI International Scientific and Technical Symposium: Geodetic monitoring of the environment GPS and GIS technologies: Alushta (Crimea), Lviv.  - 2006. - p.  79-83.