Magneto susceptible adsorbents obtained by thermochemical activation of hydrolytic lignin with Iron(III) Hydroxide

Authors:

Nikolai Bogdanovich, Mikhail Arkhilin, Anna Menshina, Lidiya Kuznetsova, Albert Kanarskii, Nadezda Voropaeva, Oleg Figovsky

Nikolai Bogdanovich-1, Mikhail Arkhilin-1, Anna Menshina-1, Lidiya Kuznetsova-1, Albert Kanarskii-2, Nadezda Voropaeva-3, Oleg Figovsky-4

Institute of Nature Science and Technologies, Northern (Arctic) Federal University named after M.V. Lomonosov, 17, Severnaya Dvina Emb., 163002 Arkhangelsk, Russia
Kazan National Research Technological University 68, K.Marks Str., 420034Kazan, Russia
Federal State Budgetary Scientific Institution, All-Russian Rapeseed Research Institute, 26, Boyevoy proezd, 398037 Lipetsk, Russia
Polymate Ltd. – International Nanotechnology Research Center, Migdal HaEmek 23100, Israel n.bogdanovich@narfu.ru

Magnetosusceptible adsorbents (MSA) were obtained by method of thermochemical activation of lignin and precipitated on its surface iron(III) hydroxide. Dependence of magnetic susceptibility and porous structure parameters were investigated. Optimal conditions of synthesis for output parameters in determined interval of factors variation were found. Structural characteristics of MSA were compared with industrial activated carbon BAU-A and OU-B. It was demonstrated that pores volume of MSA does not inferior to values for the activated carbons.

hydrolytic lignin

thermochemical activation

magnetosusceptible

adsorbent

iron(III) hydroxide

[1] Sintez i Primeneniye Ferromagnitnykh Adsorbentov. Trudy «Kazmekhanobra», Almaty 1972.
[2] Wang T., Liang L., Wang R. et al.: Adsorption, 2012, 18, 439. https://doi.org/10.1007/s10450-012-9430-2
[3] Kim B., Lee J., Um W. et al.: J. Hazard. Mater., 2011, 192, 1140. https://doi.org/10.1016/j.jhazmat.2011.06.022
[4] Wang X., Dai S.: Adsorption, 2009, 15, 138. https://doi.org/10.1007/s10450-009-9164-y
[5] Dai M, Vogt B.: J. Colloid Interf. Sci., 2012, 387, 127. https://doi.org/10.1016/j.jcis.2012.06.062
[6] Chubar’ T., Ovcharenko F., Vysotskaya V., Bovkun Z.: Kolloid. Zh., 1979, 41, 196.
[7] Yin Y., Zhou S., Min C., Wu L.: J. Colloid Interf. Sci., 2011, 361, 527. https://doi.org/10.1016/j.jcis.2011.05.014
[8] Asuha S., Gao Y., Deligeer W. et al.: J. Porous Mater., 2011, 18, 581. https://doi.org/10.1007/s10934-010-9412-2
[9] Tsyganova S., Patrushev V., Bondarenko G., Velikanov D.: Zh. Sib. Fed. Univ., 2011, 4, 369.
[10] Dobele G., Bobdanovich N., Mironova N. et al.: Khymyia Drevesiny, 1991, 6, 47.
[11] Osadshaya T., Dobele G., Bogdanovitch N. et al.: Report of VTT symposium “Power production from biomass II”, 1996, 295.
[12] Dobele G., Bogdanovitch N., Dizhbite T. et al.: Proc. of the 8th Eur. Biomass Conf. “Biomass for energy, environment, agriculture and industry”, 1994, 3, 1848.
[13] Shevtshenko R., Bogdanovich N., Kuznetsova L., Dobele G.: Lesnoi Zh., 1999, 2-3, 142.
[14] Beletskaya M.: Ph.D. thesis, NArFU, Arkhangelsk 2014.
[15] Vyacheslavov A., Yefremova M.: Opredelenie Ploshchadi Poverkhnosti i Poristosti Materialov Metodom Sorbtsii Gazov. Metodicheskaya razrabotka. MSU, Moscow 2011.
[16] Mukhin V., Klushin V.: Proizvodstvo i Primeneniye Uglerodnykh Adsorbentov. D. Mendeleev Univ. of Chem. Techn. of Russia, Moscow 2012 (in Russian).
[17] Gur’yanov V., Petukhova G., Polyakov N.: Izv. Acad. Nauk, 2001, 6, 933.
[18] Barrett E. et al.: J. Am. Chem. Soc., 1951, 73, 373.
[19] Horvath G., Kawazoe K.: J. Chem. Eng. Jpn., 1983, 16, 470. https://doi.org/10.1252/jcej.16.470
[20] Khabarov Yu., Babkin I., Veshnyakov V.: Zh. Prikl. Khim., 2012, 85, 900.