1. JCCT
  2. All Volumes and Issues
  3. Volume 13, Number 3, 2019
  4. Physico-Chemical and Technological Regularities of Foam Polystyrene Degazation in the Liquid Medium

Physico-Chemical and Technological Regularities of Foam Polystyrene Degazation in the Liquid Medium

JCCT.
2019;
Volume 13, Number 3
: pp. 347 - 351
https://doi.org/10.23939/chcht13.03.347
Authors:
  1. Volodymyr Moravskyi
  2. Volodymyr Levytskyi
  3. Michael Bratychak
  4. Ulyana Khromyak
  5. Marta Kuznetsova
  6. Nataliia Chopyk
1
Lviv Polytechnic National University
2
Lviv Polytechnic National University, The John Paul II Catholic University of Lublin
3
Lviv Polytechnic National University
4
Lviv State University of Life Safety
5
Lviv Polytechnic National University
6
Lviv Polytechnic National University

The regularities of compaction process of foam polystyrene plastics in the liquid mediums have been discovered. The influence of medium nature, temperature and technological characteristics of foam polystyrene (imaginary density, shredding degree) on the kinetics of gas phase release in the conditions of polystyrene segmental mobility has been determined. The design and method of calculation of the reactor for the process of foam polystyrene degazation via the continuous scheme is offered.

foam polystyrene
butanol
degazation
recycling
secondary use

[1] Al-Homoud M.S.: Building and Environment, 2005, 40, 353. https://doi.org/10.1016/j.buildenv.2004.05.013

[2] Aditya L., Mahlia T., Rismanchi B. et al.: Renew. Sustain. Energ. Rev., 2017, 73, 1352. https://doi.org/10.1016/j.rser.2017.02.034

[3] Lickly T., Lehr K., Welsh G.: Food Chem. Toxicol., 1995, 33, 475. https://doi.org/10.1016/0278-6915(95)00009-Q

[4] Ozturk U., Anlas G.: Mater. Design, 2011, 32, 773. https://doi.org/10.1016/j.matdes.2010.07.025

[5] Di Landro L., Sala G., Olivieri D.: Polym. Test., 2002, 21, 217. https://doi.org/10.1016/S0142-9418(01)00073-3

[6] Sikora J., Gerlach H., Levytskyi V., Moravskyi V.: J. Polym. Eng., 2013, 33, 501. https://doi.org/10.1515/polyeng-2013-0006

[7] Kan A., Demirboğa R.: J. Mater. Process. Techn., 2009, 209, 2994. https://doi.org/10.1016/j.jmatprotec.2008.07.017

[8] Levytskyj V., Laruk Yu., Huminetsky T., Sikora J.: Chem. Chem. Technol., 2015, 2, 199. https://doi.org/10.23939/chcht09.02.199

[9] Moravskyi V., Dziaman I., Suberliak S. et al.: East.-Eur. J. Enterpr. Techn., 2017, 4, 50. https://doi.org/10.15587/1729-4061.2017.108462

[10] Moravskyi V., Dziaman I., Suberliak S. et al.: 7th Int. Conf. on Nanomaterials: Applications and Properties, Ukraine, Zatoka 2017, 03NNSA18. 10.1109/NAP.2017.8190265

[11] Moravskyi V., Kucherenko А., Kuznetsova М. et al.: East.-Eur. J. Enterpr. Techn.., 2018, 3, 40. https://doi.org/10.15587/1729-4061.2018.131446

[12] Kasatkin A.: Osnovnye Protsessy i Apparaty Khimicheskoy Tekhnologii. Goskhimizdat, Moskva 1961.

[13] Levytskyi V., Katruk D., Shybanova A. et al.: Mater. Sci., 2017, 52, 559. https://doi.org/10.1007/s11003-017-9990-0

[14] Levyts’kyi V., Katruk D., Kochubei V. et al.: Mater. Sci., 2017, 53, 385. https://doi.org/10.1007/s11003-017-0086-7