1. JCCT
  2. All Volumes and Issues
  3. Volume 14, Number 1, 2020
  4. Analysis of the Possibility of the Polymeric Aggregates Use in the Design of Building Block

Analysis of the Possibility of the Polymeric Aggregates Use in the Design of Building Block

JCCT.
2020;
Volume 14, Number 1
: pp. 116 - 120
https://doi.org/10.23939/chcht14.01.116
Authors:
  1. Rodríguez García José
  2. Armendáriz Mireles Eddie
  3. López Ceballos Roque
  4. Rocha Rangel Enrique
  5. López García Ricardo
  6. Jaime Hinojosa Torres
1
Victoria Polytechnic University, Department of Manufacture in Advanced Materials, Ciudad Victoria
2
Victoria Polytechnic University, Department of Manufacture in Advanced Materials, Ciudad Victoria
3
Victoria Polytechnic University, Department of Manufacture in Advanced Materials, Ciudad Victoria
4
Victoria Polytechnic University, Department of Manufacture in Advanced Materials, Ciudad Victoria
5
Victoria City Technological Institute, Department of Metal Mechanics, Ciudad Victoria
6
National Autonomous University of Mexico, Engineering Department, Cuautitlán Izcalli

Particulate composite was prepared from a mixture of cement, gravel and water with additions of a polyepoxide and/or expanded polystyrene in powder. For consolidation, each mixture was poured into a mold, remaining for a short period and then removed. For complete solidification the specimens were cured with water during the final stage. The weight, compressive strength and thermal conductivity of the composite were determined.

building block
particulate composite
compressive strength
thermal conductivity
thermally stable polymer
  1. Luai M., Ahmad A.: Appl. Thermal Eng., 2008, 29, 1123. https://doi.org/10.1016/j.applthermaleng.2008.06.003
  2. Munive G., Leal A., Pech M. et al.: Mineral Proces. Extract. Metallurg., 2011, 26, 1. https://doi.org/10.1080/08827508.2011.604696
  3. Pérez J., Cabanillas R., Hinojosa J., Borbón A.: Información Tecnológica, 2011, 223, 27. https://doi.org/10.4067/S0718-07642011000300005
  4. Vergara E., Vergara D., Najera P., Otaño L.: Proceed. 18th Int. Congress on Project Management and Engineering, España, Alcañiz 2014, 1009.
  5. De Melo A., Silva E.: Materiales de Construcción, 2013, 63, 479. https://doi.org/10.3989/mc.2013.05912
  6. Chabannes M., Charles J., Clerc L., Garcia E.: Construct. Build. Mater., 2014, 70, 428. https://doi.org/10.1016/j.conbuildmat.2014.07.025
  7. González I., González B., Martínez F., Carro D.: Materiales de Construcción, 2016, 66, 1. https://doi.org/10.3989/mc.2016.06415
  8. Askeland D., Pradeep P., Wright W.: Ciencia e Ingeniería de los Materiales. CENGAGE Learning, EUA 2011.
  9. Fitzgeralg R.: Mecánica de materiales. Addision-Wesley Publishing Company Inc., EUA 2000.
  10. Gómez S.: Solid Works Simulation. España Ra-Ma, España 2010